Oil mist separation efficiency test bench| Testing Equipment

• 

Quality assurance and the development of filters/separators/collectors should ideally be conducted under test conditions relevant to the actual conditions encountered. Therefore, oil separators must be tested at high temperatures up to 120°C and, depending on the application type, at high pressures.

Using the modular test system HMT 1000. oil separators (e.g., for separating leaked aerosols in internal combustion engines or for separating oil mist downstream of compressors) can be characterized quickly and accurately, and successfully tested under real-world conditions via isothermal particle measurements up to 120°C:

• Staged separation efficiency

• Load/holding time

• Total separation efficiency/weight analysis

• Pressure loss

Due to the modular layout, individual components of the test bench, such as the high-resolution heated light scattering spectrometer, the heated dilution system KHG 10 D, and the heated aerosol generator PLG 2100. can be easily removed from the HMT 1000 and used for other applications, such as direct measurements on the engine.

At the heart of the HMT 1000 is the light scattering spectrometer, which is used to simultaneously and independently measure particle size and particle number (and thus concentration). With the Promo® 1000 H, very fast, clear, reproducible, and isothermal measurements are possible.

Standard

GB/T 6165-2021

Technical parameters

Advantages

Grading and Separation Efficiency and Feed Measurement and Evaluation

Isothermal and Isobaric Measurements

All Components Can Be Heated to 120°C

High Reproducibility of Test Methods

Internationally Comparable Measurement Results Due to the Widely Used Measurement System

Customer-Initiated Cleaning and Calibration

Easy to Operate; Even Untrained Personnel Can Quickly Use the Equipment

Modular Layout Offers Greater Flexibility

Validate the Functionality of Individual Components and the Entire System During Pre-Delivery Acceptance Testing and Upon Delivery**

Reliable Operation

Short Setup Time and Extremely Low Maintenance Costs

The Equipment Will Reduce Your Operating Costs

Другие товары поставщика

	JIS Colour Fastness Rubbing Tester	TheJapanese Standard Color Fastness to Rub Tester (Gakushin)is a specialized instrument designed to evaluate the colorfastness of textiles to frict...
	Multiplex Sand/Wheel Abrasion Tester	The STD-TE 65 Multiplex Sand/Wheel Abrasion Tester is designed to perform tests according to the conditions described in the following methods: AS...
	Textile Fabric Steam Shrinkage Test Machine	Testing Standards: ISO 3005, BS 4323, NEXT TM 15, M&S P8, IWTO 29-76 Application: This instrument is suitable for woven fabrics and knitte...
	Textile Fabric Steam Shrinkage Tester	Testing Standards: ISO 3005:A standard method for determining dimensional changes in fabrics caused by loose steaming, applicable to woven fabrics...
	Cross scratch tester | Testing Equipment	Standards Automotive Standards: PV 3952. Ford BN 108-03. BMW 0180. DAF KEUR 00824-401. GME 60401. GM 14829. Jaguar-Landrover TPJLR.52.00. GM N 146...

Похожие товары

	Blanket Flammability Test Machine	Продавец: Standard Groups	Bed Blanket Flammability Tester-It is mainly used for testing the flame retardant performance of ...
	High Temperature Oxygen Index Tester	Продавец: Standard Groups	The High-Temperature Oxygen Index (TOI) measuring instrument determines oxygen index at up to 125...
	Limiting Oxygen Index Tester	Продавец: Standard Groups	The Limiting Oxygen Index Tester measures the minimum oxygen concentration needed to sustain comb...
	Vertical Flammability Tester	Продавец: Standard Groups	Vertical Flammability Chamber for measuring the vertical flame spread for children’ sleepwe...
	45 Degree Flammability Tester	Продавец: Standard Groups	Application 45 Degree Flammability Tester is used to determine the burning characteristics of te...