Tracking Index Tester
Leakage Current Tracking Tester is designed to evaluate the tracking resistance of solid electrical insulating materials under humid conditions. By applying voltage across a specimen and dripping a conductive liquid, the tester simulates the electrical stress and evaluates the material's resistance to surface tracking. The equipment is widely used in electronics, plastics, electrical, and automotive industries for quality control and performance assessment of insulating materials and electrical components.
Standards
The tester complies with the following national, industry, and international standards:
GB/T 4207-2003: Determination of comparative and proof tracking indices of solid insulating materials under wet conditions
IEC 60112: Test methods for electric strength and tracking resistance of solid insulating materials
UL 746A: Plastic Materials – Short Term Property Evaluations
IEC 60216: Thermal aging tests for electrical insulating materials
ASTM D2344: Standard methods for insulation material aging tests
IEC 60529: Degrees of protection provided by enclosures for electrical equipment
GB/T 5169: Safety testing standards for electrical products
Specifications
| Parameter | Specification |
|---|---|
| Electrode material | Tungsten steel (test electrode), stainless steel (electrode rod) |
| Electrode size | (2 mm ±0.1 mm) × (5 mm ±0.1 mm) × (40 mm ±5 mm) |
| Electrode slope | 30° ±2° |
| Electrode spacing | 4.0 mm ±0.01 mm |
| Electrode pressure | 1.00 N ±0.01 N |
| Test solution resistance | Solution A: 0.1% NH4Cl, 3.95 ±0.05 Ω·m; Solution B: 1.98 ±0.05 Ω·m |
| Droplet device | No manual adjustment required; easy to operate |
| Droplet height | 35 mm ±5 mm (adjustable) |
| Droplet interval | 30 s ±0.01 s (pre-settable); 50 droplets ≈ 24.5 min ±2 min |
| Number of droplets | 1–9999 (pre-settable) |
| Test wind speed | 0.2 m/s |
| Test voltage | 100 V – 600 V (25 V increments, adjustable) |
| Current limit | 1.0 A ±0.1 A (voltage drop ≤10%) |
| Tracking detection | 0.50 A ±10%, 2.00 s ±10% |
| Exhaust | Ø100 mm exhaust port, top anti-backflow silent exhaust device |
| Working environment | 0–40 °C, relative humidity ≤80% |
| Power supply | 220 V 50 Hz, 0.6 kVA |
| External dimensions | 1160 mm × 600 mm × 1310 mm (including feet) |
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Xenon Arc Weatherometer - Test Equipment | The xenon arc lamp, which is capable of simulating the whole natural sunlight spectrum in the most consistent manner, can reproduce the destructive... |
 |
Sand and Dust Test Chamber for Automotive Connectors | Operating Conditions: Ambient temperature: 5°C～+28°C (average temperature within 24 hours ≤28°C); Ambient humidity: ≤85% Techni... |
 |
MARK II Slip Resistance Tester | Application: MARK II Slip Resistance Tester used the the principle of the ratio of load horizontal force to vertical force, test the maximum stati... |
 |
Protective Clothing Chemical Liquid Penetration Resistance Tester | The Protective Clothing Chemical Liquid Penetration Resistance Tester is designed to evaluate the resistance of protective clothing materials again... |
 |
Air Permeability Tester | Air Permeability Tester of textile fabrics complies with ASTM D737, ISO 9237/7231, BS 5636, etc. It is used to test the resistance of the flow of a... |
Похожие товары
 |
Air Intake Filter Test System | Продавец: Standard Groups | The Air Intake Filter Test System is designed for testing industrial air filters and engine air f... |
 |
Mattress Spring Fatigue Tester，ASTM D3574 ，how to test mattress for sagging | Продавец: Standard International Group (HK) Limited | The King Size Foam Fatigue Tester is a single-station pneumatic fatigue testing system designed f... |
 |
Mattress Rollator，ASTM F1566 ，Mattress Durability Tester，Mattress Fatigue Tester | Продавец: Standard International Group (HK) Limited | The Mattress Rollator is a laboratory durability testing system designed to evaluate the long-ter... |
 |
HD2 Pneumatic Foam Fatigue Tester，ISO 3385，Foam Fatigue Testing Machine | Продавец: Standard International Group (HK) Limited | The HD2 Pneumatic Foam Fatigue Tester is a heavy-duty, single-station laboratory testing machine ... |
 |
VW Heel Abrasion Tester，ISO 4649 ，Heel Performance Testing Machine | Продавец: Standard International Group (HK) Limited | The VW Heel Abrasion Tester is designed to evaluate the wear resistance of floor covering materia... |
