Finger Tip Abrasion Tester，IEC 60068，Fingertip Wear Testing Machine

The Finger Tip Abrasion Tester is designed to simulate human fingertip contact on a test specimen by applying a defined load, stroke, and speed. It evaluates the abrasion resistance and durability of surfaces subjected to frequent tactile interaction, such as control panels, touch surfaces, switches, and coatings.

Application

The applied load is set using dead weights, and the scrub (abrading) distance is adjustable from 1 to 4 mm, allowing precise adaptation to different test materials and geometries. This tester supports a wide range of applications, including mechanical abrasion and chemo-mechanical testing when liquids such as artificial sweat, hydraulic oil, or cleaning solutions are applied to the test fabric.

Standard

(1) IEC 68-2-70 – Mechanical durability of materials via fingertip/hand simulation

(2) GB/T 2423 series – Environmental testing of electrical and mechanical durability

(3) IEC 60068-2-70 – Fingertip/hand friction durability testing

(4) IEC 60068-2-72 – Surface wear and operational lifetime testing of materials

(5) ISO 11998 – Coating scrub and abrasion resistance methods

(6) ISO 2813 – Surface state and gloss evaluation methods

Technical Specifications

Feature	Specification
Test Method	Simulates fingertip contact abrasion
Standard Compliance	IEC 68-2-70
Test Load	Variable from 1 N to 100 N (set with dead weights)
Stroke (Scrub Distance)	Adjustable from 1 to 4 mm
Test Pistons	10 mm and 20 mm diameter silicone test pistons
Cycle Counter	Pre-set digital counter
Operation Modes	Mechanical abrasion and chemo-mechanical abrasion
Dimensions (Approx.)	100 × 80 × 60 cm
Power Supply	110 V / 60 Hz
Construction	Precision-machined components for repeatable operation
Control Interface	Manual adjustment and digital cycle control

Features

Realistic Human Contact Simulation: Accurately replicates fingertip abrasion under controlled load and stroke conditions.

Adjustable Parameters: Easily modify test load and stroke to suit different surface materials and textures.

Chemo-Mechanical Capability: Enables testing with liquids such as sweat or cleaning agents for enhanced realism.

Durable & Reliable Design: Built from precision aluminum and stainless steel components.

User-Friendly Controls: Simple setup with pre-set counter and intuitive adjustments.

Comprehensive Documentation: Supplied with operation manual, maintenance schedule, and replacement parts list.

Test Procedures

Measure and record specimen dimensions and thickness.

Secure the sample in the fixture and align properly.

Adjust fingertip mechanism height according to specimen thickness.

Install friction pad or chemical carrier.

Set load, friction stroke, and cycle count.

Start the device and monitor operation.

When the set cycle count is reached, the device automatically stops.

Remove the sample and evaluate surface appearance or performance changes.

Record and organize test results.

Maintenance Information

Keep fingertip heads and clamps clean to avoid contamination.

Inspect moving parts and mechanism for wear regularly.

Replace silicone fingertips or friction pads when worn.

Check and calibrate load weights and counter periodically.

Store in a clean, dry environment to prevent corrosion or damage.

Другие товары поставщика

	Functional Garment Pressure Testing Equipment	Applications Full-Body Garment Stress Tester is used to evaluate the pressure exerted by various form-fitting garments or other wearable apparel o...
	Medical glove water-impermeability tester	The Impermeability Tester for Medical Gloves plays a crucial role in the medical field. The following is a detailed introduction to its main uses, ...
	Single Station Jounce Tester，Vehicle suspension jounce testing rig	The Single Station Jounce Tester is designed for vibration durability testing of automotive seat cushions and backrests. It evaluates the fatigue s...
	Vacuum leak tester	Vacuum Decay Leak Tester specializes in the detection of leaks in ampoules, vials, injection bottles, freeze-dried powder injection bottles, and pr...
	Water Leak Detector	The Water Leak Detector primarily measures the volume and rate of gas released when a substance reacts with water, used to determine the packaging ...

Все товары поставщика

Похожие товары

	Tabletop Xenon Arc Weathering Tester (SunMaster)	Продавец: Standard Groups	Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Water-Cooled Xenon Lamp Weat...
	Blow-By Test Rig	Продавец: Standard Groups	Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Test system for the characterisa...
	Air filter System（ISO 16890/EN 779）	Продавец: Standard Groups	Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Filter test system for general a...
	Oil Thread Leak Test System	Продавец: Standard Groups	Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Test System for oil thread leak ...
	Manual HEPA/ULPA Filter Scanning Test System	Продавец: Standard Groups	Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Manual HEPA/ULPA Filter Scan...