BS 5852 Combustion Tester，cigarette ignition tester

• 

Whats/App: +86 156 1874 6768

Web: standard-groups.com

BS 5852 combustion test equipment is widely used to test the flame retardant properties in Europe and United States soft furniture. It takes the flammability test with 0-7 fire and standard fabrics and sponge.

Application

BS 5852 combustion test equipment is mainly used to determine the flame retardant properties of soft furniture. It’s widely and conveniently use.

Furniture industry: Assessing combustion performance of mattresses, sofas, and related furniture materials.

Fire safety: Providing reaction data of furniture materials under fire for testing organizations.

Quality control: Supporting manufacturers in performance evaluation and certification compliance.

Research institutions: Studying combustion characteristics of new flame-retardant materials.

Standards

◆UK Regulation British furniture (fire and safety) regulations test

◆BS 5852 Methods of test for assessment of the ignitability of upholstered seating by smouldering and flaming ignition sources

◆CFR 1634 Standard for the flammability of residential upholstered furniture; Proposed rule.

◆ISO 11925-2 – Reaction to fire tests for furniture

Features

◆Stainless steel sample frame.

◆The dimension is 450 mm X300 mm X150mm and 450 mm X450 mm X300mm.

◆Heat-resistant wire mesh structure.

◆Stainless steel ignition tube.

◆Stainless steel test template.

◆Digital display, the accuracy of the numerical display is 0.01cm.

◆Standard wood, standard sponge and standard cigarettes.

Parameters

Test Procedures

This test must be conducted in a laboratory with standard airflow. The upholstery and filling materials are placed in a test apparatus to create a small sofa with a base and backrest measuring 90°. An ignition source is placed at the connection between the sofa's base and backrest. There are six different ignition sources, numbered 2-7. where 2-3 are gas combustion sources and 4-7 are wood combustion sources (higher numbers represent more intense ignition sources within the group).

During the gas combustion process, the smoldering time from the start should not exceed 30 minutes (60 minutes for wood combustion sources). If the test does not demonstrate charring in all directions beyond 100mm above the ignition source, the gas flame should be removed after 40 seconds (ignition source 2) or 70 seconds (ignition source 3). If there is no flame, it is permissible to continue for more than 120 seconds after the removal of the combustion tube. If there is no flame, it is permissible to continue for 10 minutes after the start of the test for ignition source 5 (13 minutes for ignition sources 6-7).

Другие товары поставщика

	Plastic Biodegradation Testing System，ISO 16929 Biodegradable Plastic Testing Instruments	Whats/App: +86 156 1874 6768 Web: standard-groups.com The Plastic Biodegradation Testing System is a laboratory system used to evaluate the ultim...
	Degradation Testing chamber for PV Modules	Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The Light Decay Test Chamber is a high-precision indoor exposure system speci...
	Multi-Functional Scratch Tester Manufacturer	Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The Multi-Functional Scratch Tester suits automotive interior materials like ...
	ISO 4918 Caster Wheel Wear Tester Factory Supplier Wholesale	Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Features (1) Standard Compliance: Fully complies with national and internati...
	Plastic Pipe Hydrostatic Pressure Burst Tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com The Plastic Pipe Hydrostatic Pressure Burst Tester utilizes an international airless pressu...

Похожие товары

	ER4043 Silicon Aluminum Welding Wire	Продавец: 868776	Hangzhou Kunli Welding Materials Co., Ltd. offers ER4043 Silicon Aluminum Welding Wire for alumin...
	Высокоскоростная экструзионная линия для производства гофрированных труб с двойными стенками из ПЭВП с водяным охлаждением	Продавец: Shandong HUASU Plastic Technology Co.,Ltd.	Формы имеют структуру с двойным каналом потока и фильерную головку, обработанную азотированием и ...
	PanEVAP & MVR system	Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat...
	PanGAP wide gap welded plate heat exchanger	Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel...
	PanBloc welded plate heat exchanger	Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac...