BS 5852 Combustion Tester，cigarette ignition tester
BS 5852 combustion test equipment is widely used to test the flame retardant properties in Europe and United States soft furniture. It takes the flammability test with 0-7 fire and standard fabrics and sponge.
Application
BS 5852 combustion test equipment is mainly used to determine the flame retardant properties of soft furniture. It’s widely and conveniently use.
Furniture industry: Assessing combustion performance of mattresses, sofas, and related furniture materials.
Fire safety: Providing reaction data of furniture materials under fire for testing organizations.
Quality control: Supporting manufacturers in performance evaluation and certification compliance.
Research institutions: Studying combustion characteristics of new flame-retardant materials.
Standards
◆UK Regulation British furniture (fire and safety) regulations test
◆BS 5852 Methods of test for assessment of the ignitability of upholstered seating by smouldering and flaming ignition sources
◆CFR 1634 Standard for the flammability of residential upholstered furniture; Proposed rule.
◆ISO 11925-2 – Reaction to fire tests for furniture
Features
◆Stainless steel sample frame.
◆The dimension is 450 mm X300 mm X150mm and 450 mm X450 mm X300mm.
◆Heat-resistant wire mesh structure.
◆Stainless steel ignition tube.
◆Stainless steel test template.
◆Digital display, the accuracy of the numerical display is 0.01cm.
◆Standard wood, standard sponge and standard cigarettes.
Parameters
|
Test mode |
Automatic |
|
Test flow |
(45±2)m1/min |
|
Air pressure |
|
|
The length of air pipe |
Length 2.5~3mm, Inner diameter 7±1mm |
|
Timer |
0~999s |
|
Power supply |
AC 220V 50/60HZ |
|
Dimensions |
570x310x440mm(L x W x H) |
|
Weight |
20kg |
Test Procedures
This test must be conducted in a laboratory with standard airflow. The upholstery and filling materials are placed in a test apparatus to create a small sofa with a base and backrest measuring 90°. An ignition source is placed at the connection between the sofa's base and backrest. There are six different ignition sources, numbered 2-7. where 2-3 are gas combustion sources and 4-7 are wood combustion sources (higher numbers represent more intense ignition sources within the group).
During the gas combustion process, the smoldering time from the start should not exceed 30 minutes (60 minutes for wood combustion sources). If the test does not demonstrate charring in all directions beyond 100mm above the ignition source, the gas flame should be removed after 40 seconds (ignition source 2) or 70 seconds (ignition source 3). If there is no flame, it is permissible to continue for more than 120 seconds after the removal of the combustion tube. If there is no flame, it is permissible to continue for 10 minutes after the start of the test for ignition source 5 (13 minutes for ignition sources 6-7).
在线联系供应商
Other supplier products
 |
Syringe needle flow tester | The Syringe Needle Flow Tester is designed to evaluate the flow characteristics of syringes by measuring the volume of liquid discharged over a spe... |
 |
Conveyor Belt Drum Friction Testing Machine | Main Purposes of Conveyor Belt Drum Friction Testing Machine The conveyor belt drum friction testing machine has extensive application value in mu... |
 |
Goggles Puncture Resistance Testing Machine | Applicable standards: GB 811-2010 ECE R22.05 EN1077 Purpose It is to make a certain weight of sharp objects fall from the height specified i... |
 |
UL1581 FCable Burning Test Chamber | Introduction: Wire and cable horizontal vertical combustion tester is designed and manufactured according to UL1581. The tester is used to carry o... |
 |
Guide pin anchoring force tester | The Guide Pin Anchoring Force Tester is designed to evaluate the anchoring performance of mammary positioning wires and guide needles. It ensures t... |
