Aviation Propulsion Fuel Test System，Aircraft engine fuel test equipment

Whats/App: +86 156 1874 6768

Web: standard-groups.com

The Aviation Propulsion Fuel Test System is a precision testing platform designed for evaluating fuel combustion and performance in aircraft propulsion components. You can use it to conduct automated fuel burn tests on aerospace power units, measuring fuel flow, pressure, temperature, and combustion characteristics under controlled conditions. The system incorporates the FAA-approved NexGen Aviation Fuel Burner, compatible with previous generation burners such as Park DPL 3400. Lennox Model OB-32. and Carlin Model 200 CRD, while providing enhanced control and modularity for future upgrades.

Application

The Aviation Propulsion Fuel Test System is suitable for a wide range of aerospace testing applications:

Aircraft Propulsion Components: Automated fuel combustion testing for turbines, pumps, and engine assemblies.

Fuel System Evaluation: Measure fuel system performance, burn characteristics, and low-temperature operability.

Component Fire Safety: Conduct controlled burn tests on aircraft fuel lines, fuel pumps, and connected systems.

R&D and Certification Testing: Support FAA, ISO, and SAE compliance testing of fuel systems and propulsion components.

Integration Testing: Test aircraft modules and subassemblies under simulated operational and thermal load conditions.

Typical test products include aircraft turbine fuel pumps, valves, fuel lines, engine components, and other fuel system assemblies.

Standards

The system supports compliance with international and domestic standards for aviation fuel system testing:

FIRE TEST HANDBOOK: Chapter 12 – Material and component fire testing methods.

ISO 8217 – Aviation turbine fuel specifications.

ISO 11170 – Aircraft fuel pump performance testing.

ASTM D1655 – Aviation turbine fuel standards.

ASTM D3241 – Fuel combustion performance and low-temperature testing.

SAE AS22771 – Aviation engine fuel system component testing.

SAE AS1241 – Fuel pump performance and durability tests.

FAR Part 33 – Aircraft engine airworthiness, including fuel system design and testing.

FAR Part 23 / Part 25 Appendix F – Fire resistance and performance requirements for fuel systems in transport and general aviation.

DEF STAN 91-091 – UK Defense fuel system performance testing.

EUROCAE ED-79 / ED-79A – Aircraft engine fuel system certification and testing.

BSS Series (e.g., BSS 7220) – Fuel system material flammability and compatibility evaluation.

Parameters

Parameter Category	Details
Dimensions	1500 mm (W) × 1800 mm (H) × 900 mm (D)
Weight	150 kg
Fuel Requirement	Aviation kerosene
Compressed Air Requirement	≥ 120 PSI
Power Supply	220 V, 10 A
Operating Temperature	10°C – 35°C
Sample Mounting	Horizontal and vertical installation supported

Features

Burner cone made from corrosion-resistant, high-temperature alloy.

NexGen Aviation Fuel Burner includes diffuser, fuel nozzle, igniter, fuel rail, mounting bracket, ventilation duct, housing, silencer, and acoustic barrier.

Equipped with fuel pressure gauge, fuel solenoid valve, fuel temperature sensor, air regulator, and air temperature sensor.

Fuel and air temperature control baths (≥ 2 × 0.14 m³) maintain stable combustion conditions.

Adjustable fuel nozzle and air pressure allow compliance with multiple test standards.

Insulation blankets cover fuel lines and burner body for safety and heat containment.

Supports modular NexGen burner system units for flexibility.

Heavy-duty steel frame supports horizontal and vertical sample installation.

Calibration employs seven 1.6 mm diameter, ceramic-coated, metal-sheathed, grounded K-type thermocouples (AWG 30. 0.0507 mm² cross-section, 361 Ω/km), mounted on an angle-iron thermocouple comb.

Heat flux sensors with cooling system, mounted on fixed supports for accurate measurement.

Accessories

NexGen Aviation Fuel Burner with full assembly

Fuel and air temperature control baths

Fuel solenoid valve and pressure gauge

Igniter assembly

Adjustable fuel nozzle

Insulation blankets and acoustic silencer

Heavy-duty steel mounting frame

Thermocouple comb for calibration

Heat flux sensors with cooling system

Test Procedures

Ensure the installation area is clear and safe.

Connect the system to a 220 V, 10 A power supply.

Supply aviation kerosene fuel and compressed air ≥ 120 PSI.

Mount the test sample securely on the horizontal or vertical frame.

Apply insulation blankets to fuel lines and burner housing.

Adjust fuel nozzle and air pressure according to the selected test standard.

Activate the igniter and NexGen fuel burner.

Monitor fuel flow, air pressure, flame temperature, and heat flux using sensors.

Conduct automated combustion tests on propulsion components.

Record all data for compliance reporting and analysis.

Shut off fuel and air supply and allow the system to cool before sample removal.

Maintenance Information

Inspect the burner cone, fuel nozzle, and igniter for corrosion or wear before each test.

Check fuel and air lines for blockages or leaks.

Periodically calibrate thermocouples and heat flux sensors.

Clean insulation blankets and acoustic components as needed.

Replace any worn or damaged safety components immediately to maintain operational safety.

Другие товары поставщика

	Ring and block friction and wear tester for lubrication analysis	Whats/App: +86 156 1874 6768 Web: standard-groups.com The Metal Ring-and-Block Friction and Wear Tester is a laboratory testing machine designed ...
	High Precision Car Seat Comfort Testing System for Ergonomic & Dynamic Performance Evaluation	Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Features Simulates vertical and horizontal dynamic loads on automotive seats...
	UL1581 FCable Burning Test Chamber	Whats/App: +86 156 1874 6768 Web: standard-groups.com Introduction: Wire and cable horizontal vertical combustion tester is designed and manufac...
	Nail Bed Flammability Tester Manufacturer – Mattress Fire Test Equipment Supplier	Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com E-mail：info@standard-groups。com Features 1. High Precision: Constructed fro...
	Fabric Far Infrared Emissivity Mapping Device	Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The Textile Far-Infrared Emissivity Tester is a precision instrument designed...

Все товары поставщика

Похожие товары

	ER4047 Aluminum Mig Welding Wire	Продавец: 868776	Hangzhou Kunli Welding Materials Co., Ltd. specializes in manufacturing reliable welding material...
	ER4043 Silicon Aluminum Welding Wire	Продавец: 868776	Hangzhou Kunli Welding Materials Co., Ltd. specializes in manufacturing high-quality welding mate...
	Choosing the Right Equipment for Heavy-Duty Cleaning	Продавец: Taizhou Feike Mechanical Technology Co., Ltd.	FEIKE’s High Pressure Washer is designed for industrial cleaning, equipment maintenance, ve...
	ER4043 Silicon Aluminum Welding Wire	Продавец: 868776	Hangzhou Kunli Welding Materials Co., Ltd. offers ER4043 Silicon Aluminum Welding Wire for alumin...
	Высокоскоростная экструзионная линия для производства гофрированных труб с двойными стенками из ПЭВП с водяным охлаждением	Продавец: Shandong HUASU Plastic Technology Co.,Ltd.	Формы имеют структуру с двойным каналом потока и фильерную головку, обработанную азотированием и ...