Aviation Propulsion Fuel Test System，Aircraft engine fuel test equipment
Whats/App: +86 156 1874 6768
Web: standard-groups.com
The Aviation Propulsion Fuel Test System is a precision testing platform designed for evaluating fuel combustion and performance in aircraft propulsion components. You can use it to conduct automated fuel burn tests on aerospace power units, measuring fuel flow, pressure, temperature, and combustion characteristics under controlled conditions. The system incorporates the FAA-approved NexGen Aviation Fuel Burner, compatible with previous generation burners such as Park DPL 3400. Lennox Model OB-32. and Carlin Model 200 CRD, while providing enhanced control and modularity for future upgrades.
Application
The Aviation Propulsion Fuel Test System is suitable for a wide range of aerospace testing applications:
Aircraft Propulsion Components: Automated fuel combustion testing for turbines, pumps, and engine assemblies.
Fuel System Evaluation: Measure fuel system performance, burn characteristics, and low-temperature operability.
Component Fire Safety: Conduct controlled burn tests on aircraft fuel lines, fuel pumps, and connected systems.
R&D and Certification Testing: Support FAA, ISO, and SAE compliance testing of fuel systems and propulsion components.
Integration Testing: Test aircraft modules and subassemblies under simulated operational and thermal load conditions.
Typical test products include aircraft turbine fuel pumps, valves, fuel lines, engine components, and other fuel system assemblies.
Standards
The system supports compliance with international and domestic standards for aviation fuel system testing:
FIRE TEST HANDBOOK: Chapter 12 – Material and component fire testing methods.
ISO 8217 – Aviation turbine fuel specifications.
ISO 11170 – Aircraft fuel pump performance testing.
ASTM D1655 – Aviation turbine fuel standards.
ASTM D3241 – Fuel combustion performance and low-temperature testing.
SAE AS22771 – Aviation engine fuel system component testing.
SAE AS1241 – Fuel pump performance and durability tests.
FAR Part 33 – Aircraft engine airworthiness, including fuel system design and testing.
FAR Part 23 / Part 25 Appendix F – Fire resistance and performance requirements for fuel systems in transport and general aviation.
DEF STAN 91-091 – UK Defense fuel system performance testing.
EUROCAE ED-79 / ED-79A – Aircraft engine fuel system certification and testing.
BSS Series (e.g., BSS 7220) – Fuel system material flammability and compatibility evaluation.
Parameters
| Parameter Category | Details |
|---|---|
| Dimensions | 1500 mm (W) × 1800 mm (H) × 900 mm (D) |
| Weight | 150 kg |
| Fuel Requirement | Aviation kerosene |
| Compressed Air Requirement | ≥ 120 PSI |
| Power Supply | 220 V, 10 A |
| Operating Temperature | 10°C – 35°C |
| Sample Mounting | Horizontal and vertical installation supported |
Features
Burner cone made from corrosion-resistant, high-temperature alloy.
NexGen Aviation Fuel Burner includes diffuser, fuel nozzle, igniter, fuel rail, mounting bracket, ventilation duct, housing, silencer, and acoustic barrier.
Equipped with fuel pressure gauge, fuel solenoid valve, fuel temperature sensor, air regulator, and air temperature sensor.
Fuel and air temperature control baths (≥ 2 × 0.14 m³) maintain stable combustion conditions.
Adjustable fuel nozzle and air pressure allow compliance with multiple test standards.
Insulation blankets cover fuel lines and burner body for safety and heat containment.
Supports modular NexGen burner system units for flexibility.
Heavy-duty steel frame supports horizontal and vertical sample installation.
Calibration employs seven 1.6 mm diameter, ceramic-coated, metal-sheathed, grounded K-type thermocouples (AWG 30. 0.0507 mm² cross-section, 361 Ω/km), mounted on an angle-iron thermocouple comb.
Heat flux sensors with cooling system, mounted on fixed supports for accurate measurement.
Accessories
NexGen Aviation Fuel Burner with full assembly
Fuel and air temperature control baths
Fuel solenoid valve and pressure gauge
Igniter assembly
Adjustable fuel nozzle
Insulation blankets and acoustic silencer
Heavy-duty steel mounting frame
Thermocouple comb for calibration
Heat flux sensors with cooling system
Test Procedures
Ensure the installation area is clear and safe.
Connect the system to a 220 V, 10 A power supply.
Supply aviation kerosene fuel and compressed air ≥ 120 PSI.
Mount the test sample securely on the horizontal or vertical frame.
Apply insulation blankets to fuel lines and burner housing.
Adjust fuel nozzle and air pressure according to the selected test standard.
Activate the igniter and NexGen fuel burner.
Monitor fuel flow, air pressure, flame temperature, and heat flux using sensors.
Conduct automated combustion tests on propulsion components.
Record all data for compliance reporting and analysis.
Shut off fuel and air supply and allow the system to cool before sample removal.
Maintenance Information
Inspect the burner cone, fuel nozzle, and igniter for corrosion or wear before each test.
Check fuel and air lines for blockages or leaks.
Periodically calibrate thermocouples and heat flux sensors.
Clean insulation blankets and acoustic components as needed.
Replace any worn or damaged safety components immediately to maintain operational safety.
在线联系供应商
Other supplier products
 |
Plastic Smoke Density Tester F313，automotive interior smoke tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the spe... |
 |
Autocatalytic Decomposition Temperature Tester with Thermal Insulation，autocatalytic decomposition temperature measurement | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Autocatalytic Decomposition Temperature Tester with Thermal Insulation (Adiabatic SADT ... |
 |
ASTM D2843 Smoke Density Testing for Cables | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The STD AOTSI-NBS smoke density test chamber, from NIST (NBS's predecessor), ... |
 |
Hot Tack Tester / Heat Seal Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Hot Tack Tester/Heat Seal Tester is specifically designed for testing the heat-adhesion... |
 |
Cabin Air Filter Test System（Gas Adsorption），ISO 11155 Cabin Air Filter Testing Equipment | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Filter Test System for gas adsorption/desorption of air filters for passenger compartme... |
Same products
 |
HDPE高速水冷双壁波纹管生产线 | 卖方: Shandong HUASU Plastic Technology Co.,Ltd. | 机头模具采用双流道结构、氮化磨光处理机头，偏壁调整方便快捷，保证内外层壁厚均匀和稳定成型。 最新设计密闭压力水冷冷却结构，冷却充分，多点分布真空系统，效率更高，生产速度更快。 双层在线扩口功... |
 |
PanEVAP & MVR system | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
