Multi-Function Friction and Wear Tester
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Multi-Function Friction and Wear Tester is a highly configurable tribological testing system designed for comprehensive evaluation of friction and wear behavior of materials. The system offers an extra-large working space, an ultra-wide load range, and the capability to integrate an in-situ 3D optical surface profiler. With interchangeable test modules and optional environmental chambers, it supports tribological testing from nano to macro scales under controlled temperature, humidity, pressure, or vacuum conditions. The instrument is widely used across aerospace, automotive, biomaterials, coatings, optics, polymers, semiconductors, and related research fields.
Application
The system is suitable for tribological performance evaluation in a wide range of testing scenarios, including but not limited to:
Friction and wear characterization of metallic materials, ceramics, polymers, coatings, and composites
Lubrication performance assessment of lubricating oils and greases
Wear mechanism analysis of bearings, gears, seals, and functional coatings
Tribological simulation of biomedical components such as artificial joints and dental materials
Surface damage, scratch resistance, and micro-motion wear studies
Supported test configurations include ball-on-disk, pin-on-disk rotation, reciprocating ring-on-block, fretting, scratch testing, and other modular test modes.
Standards
The Multi-Function Friction and Wear Tester is designed to support test methods referenced in the following standards:
ASTM G99 (Standard Test Method for Wear Testing with a Pin-on-Disk Apparatus)
ISO 20808 (Fine ceramics — Determination of friction and wear characteristics of monolithic ceramics by ball-on-disk method)
GB/T 3142 (Determination of load-carrying capacity of lubricants — Four-ball method)
SH/T 0189 (Test method for anti-wear properties of lubricating oils — Four-ball method)
Parameters
| Item | Description |
|---|---|
| Z-axis Drive System | High-precision multi-Z-axis system for accurate loading; supports in-situ 3D surface profiling and Raman spectroscopy integration |
| Platform Design | Open-architecture platform providing a large and flexible working area |
| Interchangeable Test Modules | Replaceable lower test modules enabling multiple test modes (rotation, reciprocation, ring-block, fretting, scratch); automatic module recognition |
| Environmental Control | Temperature: −120 °C to 1200 °C; Humidity: 5–95 % RH; Pressure: up to 200 psi; Vacuum: down to 10⁻⁷ torr |
| Force Sensors | Interchangeable sensors from mN to 12.000 N (capacitive, piezoelectric, strain-gauge types) |
| In-situ 3D Profiling | Automatic imaging with nanometer-level resolution; four optical modes: confocal, white-light interferometry, dark-field, bright-field |
| XY Positioning Stage | Travel range 130 mm × 270 mm for precise positioning between friction testing and surface scanning locations |
| Data Acquisition & Motion Control | High-speed, low-noise controller with fast feedback; data sampling rate up to 200 kHz |
| Z-axis Travel | 150 mm |
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Industrial chillers | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards ASHRAE 15(Safety Standard for Refrigeration Systems) ISO 5149(Refrigerating S... |
 |
Horizontal Vertical Flame Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Introduction UL94 Horizontal Vertical Flame Testeris designed to simulate the early firing... |
 |
Tensile and Shear Tester STD - FB1 - A ， ISO 6892 fabric shear load evaluation device | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Tensile and Shear Tester analyzes hand movements-referred to as "tensile"and "shear"-pe... |
 |
ISO Cargo Compartment Liner Burn-Through Fuel Testing Equipment | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The Cargo Compartment Liner Burn-Through Fuel Test System is a specialized av... |
 |
Benchtop High-Precision Material Thermal Conductivity Tester (Guarded Hot Plate Heat Flow Meter Method) | Whats/App: +86 156 1874 6768 Web: standard-groups.com Benchtop High-Precision Material Thermal Conductivity Tester (Guarded Hot Plate Heat Flow M... |
Похожие товары
 |
MMA-120 Handheld Arc Welder | Продавец: 871183 | The MMA-120 Handheld Arc Welder from ChuangLi Electronic Technology Co., Ltd. is designed for con... |
 |
SHX Series Circulating Fluidized Bed Steam Boiler | Продавец: Hebei Genjux Boiler Co.,Ltd | Capacity: 10-35 t/hWorking pressure: 1.25-2.5 MPaOperating temperature: 194-400 ℃Applicable to bi... |
 |
YQ(Y)W Series Oil/Gas Fired Vertical Thermal Oil Boiler | Продавец: Hebei Genjux Boiler Co.,Ltd | Capacity: 7000-29200 KWOperating pressure: 0.8-1.0 MPaOperating temperature: 320℃Operating mode: ... |
 |
DHL Series Coal-Fired Steam Boilers | Продавец: Hebei Genjux Boiler Co.,Ltd | Capacity: 35-75 t/hOperating pressure: 1.25-5.4 MPaOperating temperature: 194-485℃Applicable to b... |
 |
SZL Series Biomass Steam Boiler | Продавец: Hebei Genjux Boiler Co.,Ltd | Capacity: 6-35 t/hWorking pressure: 1.0-2.5 MPaOperating temperature: 184-350 ℃Applicable fuel bi... |
