.

Textile Far - Infrared Radiation Heating Tester

Whats/App: +86 156 1874 6768

Web: standard-groups.com

Applications

Textile Far Infrared Radiation Temperature Rise Tester is used for various textiles including fibers, yarns, fabrics, nonwovens, and their products. It employs temperature rise testing to determine the far-infrared performance of textiles.

Standards

GB/T 30127-2013 :“Textiles - Testing and Evaluation of Far-Infrared Properties” Clause 4.2 Test Method for Far-Infrared Radiation Temperature Rise

T/CAS 115.5-2021:Health Care Textiles — Part 5: Far Infrared

Parameters

Parameter Item

Parameter Value

Specimen Holder

500mm distance from radiation source to specimen surface

Radiation Source

Main wavelength 5μm~14μm, radiation power 150W

Specimen Irradiation Area

φ60~φ80mm

Temperature Range & Accuracy

15℃~50℃, ±0.1℃ precision, ≤1s response time

Specimen Types

  • Yarns: ≥60mm square metal frame

  • Fibers: φ60mm×30mm open cylindrical container

  • Fabrics: φ≥60mm

Accessories

(1) Standard Specimen Disk: For flat fabric samples.

(2) Square Metal Frame Fixture: Specialized for yarn specimens.

(3) Open Cylindrical Container: For loose fiber testing.

(4) High-Precision Temperature Probe: Rapid-response contact or non-contact sensor (model dependent).

(5) Integrated Thermal Printer: For immediate generation of test reports.

(6) Power Cable and Calibration Certificate.

Test Procedures

I. Power-Up and Setup

1. Connect Power:

Turn on the instrument's power switch to enter the setup interface.

2. Parameter Settings:

Irradiation Power: Typically set to 150W.

Test Duration: Generally 30 seconds.

Test Cycles: Set according to standard requirements, e.g., 5 cycles.

II. Sample Installation

1. Fixture Selection:

Thin Samples: Install thin-sample fixture and tighten the nut.

Thick Samples: Place directly onto the disk, aligning with the center.

2. Sample Placement:

Ensure the test line is positioned at the center point.

Place the sample face up and secure the edges with a ruler.

III. Test Procedure

1. Preheat: Click “Turn on Light” to preheat the instrument.

2. Start Test:

Click the test interface; timing starts for 30 seconds.

Observe temperature rise value, initial temperature, and final temperature.

Automatic Result Display: Data appears automatically upon test completion.

IV. Data Processing

Data Retrieval: Click Details to view test results.

Report Printing: Click Print to generate the test report.


Отправить запрос, связаться с поставщиком

Кому: Standard International Group (HK) Limited
Ваш E-mail:
Текст письма:


Send to other suppliers

Другие товары поставщика

Helmet Electrostatic Leakage Tester Manufacturer China
Helmet Electrostatic Leakage Tester Manufacturer China Get a quote: Whats/App: +86 156 1874 6768 Web: standard-groups.com Application This tester is suitable for a wide range of applications in both...
Backsheet Scratch Resistance Tester
Backsheet Scratch Resistance Tester Whats/App: +86 156 1874 6768 Web: standard-groups.com Application This tester is widely applied in: PV Module Backsheet Scratch Resistance Test...
Vacuum Tribometer
Vacuum Tribometer Whats/App: +86 156 1874 6768 Web: standard-groups.com Vacuum Friction and Wear Tester is a specialized tribological testing system designed to st...
Ergonomics and Human Thermal Response Measurement
Ergonomics and Human Thermal Response Measurement Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The Porton-man Thermal Manikin is suitable for a wide range of applications, i...
AATCC Viewing Board丨AATCC Viewing Board tester
AATCC Viewing Board丨AATCC Viewing Board tester Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards Built to American Association of Textile Chemists and Colorist (AATCC) approved ...
Все товары поставщика

Похожие товары

MMA-120 Handheld Arc Welder
MMA-120 Handheld Arc Welder Продавец: 871183 The MMA-120 Handheld Arc Welder from ChuangLi Electronic Technology Co., Ltd. is designed for con...
SHX Series Circulating Fluidized Bed Steam Boiler
SHX Series Circulating Fluidized Bed Steam Boiler Продавец: Hebei Genjux Boiler Co.,Ltd Capacity: 10-35 t/hWorking pressure: 1.25-2.5 MPaOperating temperature: 194-400 ℃Applicable to bi...
YQ(Y)W Series Oil/Gas Fired Vertical Thermal Oil Boiler
YQ(Y)W Series Oil/Gas Fired Vertical Thermal Oil Boiler Продавец: Hebei Genjux Boiler Co.,Ltd Capacity: 7000-29200 KWOperating pressure: 0.8-1.0 MPaOperating temperature: 320℃Operating mode: ...
DHL Series Coal-Fired Steam Boilers
DHL Series Coal-Fired Steam Boilers Продавец: Hebei Genjux Boiler Co.,Ltd Capacity: 35-75 t/hOperating pressure: 1.25-5.4 MPaOperating temperature: 194-485℃Applicable to b...
SZL Series Biomass Steam Boiler
SZL Series Biomass Steam Boiler Продавец: Hebei Genjux Boiler Co.,Ltd Capacity: 6-35 t/hWorking pressure: 1.0-2.5 MPaOperating temperature: 184-350 ℃Applicable fuel bi...