Textile Far - Infrared Radiation Heating Tester

Applications

Textile Far Infrared Radiation Temperature Rise Tester is used for various textiles including fibers, yarns, fabrics, nonwovens, and their products. It employs temperature rise testing to determine the far-infrared performance of textiles.

Standards

GB/T 30127-2013 ：“Textiles - Testing and Evaluation of Far-Infrared Properties” Clause 4.2 Test Method for Far-Infrared Radiation Temperature Rise

T/CAS 115.5-2021:Health Care Textiles — Part 5: Far Infrared

Parameters

Parameter Item	Parameter Value
Specimen Holder	500mm distance from radiation source to specimen surface
Radiation Source	Main wavelength 5μm~14μm, radiation power 150W
Specimen Irradiation Area	φ60~φ80mm
Temperature Range & Accuracy	15℃~50℃, ±0.1℃ precision, ≤1s response time
Specimen Types	Yarns: ≥60mm square metal frame Fibers: φ60mm×30mm open cylindrical container Fabrics: φ≥60mm

Accessories

(1) Standard Specimen Disk: For flat fabric samples.

(2) Square Metal Frame Fixture: Specialized for yarn specimens.

(3) Open Cylindrical Container: For loose fiber testing.

(4) High-Precision Temperature Probe: Rapid-response contact or non-contact sensor (model dependent).

(5) Integrated Thermal Printer: For immediate generation of test reports.

(6) Power Cable and Calibration Certificate.

Test Procedures

I. Power-Up and Setup

1. Connect Power:

Turn on the instrument's power switch to enter the setup interface.

2. Parameter Settings:

Irradiation Power: Typically set to 150W.

Test Duration: Generally 30 seconds.

Test Cycles: Set according to standard requirements, e.g., 5 cycles.

II. Sample Installation

1. Fixture Selection:

Thin Samples: Install thin-sample fixture and tighten the nut.

Thick Samples: Place directly onto the disk, aligning with the center.

2. Sample Placement:

Ensure the test line is positioned at the center point.

Place the sample face up and secure the edges with a ruler.

III. Test Procedure

1. Preheat: Click “Turn on Light” to preheat the instrument.

2. Start Test:

Click the test interface; timing starts for 30 seconds.

Observe temperature rise value, initial temperature, and final temperature.

Automatic Result Display: Data appears automatically upon test completion.

IV. Data Processing

Data Retrieval: Click Details to view test results.

Report Printing: Click Print to generate the test report.

Other supplier products

	Carpet hair removal measurement device	Standard ASTM D5417(Standard Test Method for Quantifying Loss of Fiber from Carpets) ISO 10362(Textile Floor Coverings - Determination of Fiber...
	Putty sanding meter	Standard GB/T 1770 YC/T 315-2009 GB/T 1749-2025 Technical parameters The technical parameters of the putty sanding tester may vary from model ...
	Automotive Sunshade End Cap Assembly Line，Automotive interior sunshade assembly line equipment	The Automotive Sunshade End Cap Assembly Line is an automated production system designed for assembling automotive sunshade end caps. By integratin...
	Powder Wet Vibrating Screen System For Lithium Battery Material Testing	The Powder Wet Vibrating Screen System is designed for particle size separation and distribution analysis of lithium battery materials under wet co...
	Compression Tester STD - FB3 - A	TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by artisans and professionals when judging a fabric' s ...

All supplier products

Same products

	industrial abrasion testing equipment	Seller: Standard International Group (HK) Limited	Applications The G282 Universal Abrasion Tester performs flat abrasion, curved abrasion, edge ab...
	custom wyzenbeek/Oscillatory Abrasion Tester	Seller: Standard International Group (HK) Limited	Application 1. Automotive Industry Testing the abrasion resistance of seat fabrics and steering...
	Injector Solenoid Valve F00RJ02697 Fits 2003-07 Dodge 2500 3500 Cummins 5.9L	Seller: Pioneer Diesel Parts	Pioneer Diesel Parts Whats/App: +86 152 6025 8100 Web: pioneerdieselparts.com The Injector Sol...
	Finger Abrasion Tester	Seller: Standard International Group (HK) Limited	Applications Universal Finger Abrasion Tester can simulate virtually all wear processes involvin...
	automatic cross hatch tester ASTM D3359	Seller: Standard International Group (HK) Limited	Application It is suitable for testing automotive interior materials, plastics, rubber, leather,...