benchtop seat belt abrasion tester
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Application
This bench-top style tester allows the operator to load test specimens, thread seatbelt material over them, and run controlled abrasion cycles. The test automatically stops once the preset number of cycles is reached, after which samples are visually inspected for wear or damage.
Standards
(1) ASTM D6770 – Webbing abrasion resistance test
(2) FED STD 191 – Test method standard for textiles
(3) FLTM BN 163-01 – Ford motor industry seat belt webbing abrasion standard
(4) FMVSS 209 – U.S. Federal Motor Vehicle Safety Standard for seat belt webbing
(5) MIL-232223B – Military seat belt material abrasion requirements
(6) MIL-T8363B – Military specification for textile webbing
(7) SAE J339 – Seat belt webbing abrasion and performance test
(8) S5 1(d) – Vehicle safety textile test method
(9) GB/T 3923.1 – Textile fabrics: Tensile properties of woven fabrics
(10) SAE J114-1994 – Safety belt webbing abrasion requirements
(11) ISO 22612:2017 – Textiles: Resistance to surface wear
(12) ISO 13934-1 – Textile fabrics: Tensile properties of fabrics
Test Procedures
Prepare seat belt samples and install securely in the five-station clamps.
Adjust friction devices to ensure uniform contact with each sample.
Input desired cycle count (e.g., 2.500 cycles) for each station.
Start automated testing; the machine stops automatically upon completion.
Remove samples and visually inspect for wear; optionally conduct strength tests.
Compare pre- and post-test performance and generate a testing report.
Maintenance Information
Keep friction rollers and contact surfaces clean and free from debris.
Periodically inspect motor, drive system, and clamps for wear.
Calibrate cycle counters to maintain accurate readings.
Ensure protective covers and emergency stop functions remain operational.
Store tester in a dry, clean environment to prevent corrosion or damage.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
| Whole shoe breathability and heat preservation testing machine | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard SATRA TM376: Thermal insulation testing of footwear with sock integration. SAT... | |
| Thermal Test Mannequin | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The High-Temperature Half Mannequin is suitable for testing a variety of prote... | |
| Rolling Contact Fatigue Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Rolling Contact Fatigue Tester is a specialized testing system designed to investigate trac... | |
| JIS L0843 GX25 Xenon Lamp Weathering Tester Factory Direct | Get a quote: Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards ISO 4892-2: Plastics—Methods of exposure to laboratory light... | |
| Surface Performance Tester STD-FB4 - A | Whats/App: +86 156 1874 6768 Web: standard-groups.com Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed b... |













