benchtop seat belt abrasion tester
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Application
This bench-top style tester allows the operator to load test specimens, thread seatbelt material over them, and run controlled abrasion cycles. The test automatically stops once the preset number of cycles is reached, after which samples are visually inspected for wear or damage.
Standards
(1) ASTM D6770 – Webbing abrasion resistance test
(2) FED STD 191 – Test method standard for textiles
(3) FLTM BN 163-01 – Ford motor industry seat belt webbing abrasion standard
(4) FMVSS 209 – U.S. Federal Motor Vehicle Safety Standard for seat belt webbing
(5) MIL-232223B – Military seat belt material abrasion requirements
(6) MIL-T8363B – Military specification for textile webbing
(7) SAE J339 – Seat belt webbing abrasion and performance test
(8) S5 1(d) – Vehicle safety textile test method
(9) GB/T 3923.1 – Textile fabrics: Tensile properties of woven fabrics
(10) SAE J114-1994 – Safety belt webbing abrasion requirements
(11) ISO 22612:2017 – Textiles: Resistance to surface wear
(12) ISO 13934-1 – Textile fabrics: Tensile properties of fabrics
Test Procedures
Prepare seat belt samples and install securely in the five-station clamps.
Adjust friction devices to ensure uniform contact with each sample.
Input desired cycle count (e.g., 2.500 cycles) for each station.
Start automated testing; the machine stops automatically upon completion.
Remove samples and visually inspect for wear; optionally conduct strength tests.
Compare pre- and post-test performance and generate a testing report.
Maintenance Information
Keep friction rollers and contact surfaces clean and free from debris.
Periodically inspect motor, drive system, and clamps for wear.
Calibrate cycle counters to maintain accurate readings.
Ensure protective covers and emergency stop functions remain operational.
Store tester in a dry, clean environment to prevent corrosion or damage.
Send product request
Other supplier products
 |
Deval abrasion chamber | Whats/App: +86 156 1874 6768 Web: standard-groups.com Product Introduction: Diphal abrasion testing machine is mainly used for stone abrasion ra... |
 |
Bus Seat Tester,Vehicle seat test equipment | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Bus Seat Tester is designed to evaluate the durability, strength, and fatigue performan... |
 |
Athletic Footwear Shock Attenuating Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Athletic Footwear Shock Attenuating Tester is primarily used to test the shock energy a... |
 |
Dry heat shrinkage tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The dry heat shrinkage tester is a crucial instrument for testing the dimensional changes o... |
 |
Ring-on-Block Friction and Wear Test Equipment Model 2M | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards GB/T 3960-2016 Plastics – Determination of Sliding Wear Properties GB/T 3... |
Same products
 |
MMA-120 Handheld Arc Welder | Seller: 871183 | The MMA-120 Handheld Arc Welder from ChuangLi Electronic Technology Co., Ltd. is designed for con... |
 |
SHX Series Circulating Fluidized Bed Steam Boiler | Seller: Hebei Genjux Boiler Co.,Ltd | Capacity: 10-35 t/hWorking pressure: 1.25-2.5 MPaOperating temperature: 194-400 ℃Applicable to bi... |
 |
YQ(Y)W Series Oil/Gas Fired Vertical Thermal Oil Boiler | Seller: Hebei Genjux Boiler Co.,Ltd | Capacity: 7000-29200 KWOperating pressure: 0.8-1.0 MPaOperating temperature: 320℃Operating mode: ... |
 |
DHL Series Coal-Fired Steam Boilers | Seller: Hebei Genjux Boiler Co.,Ltd | Capacity: 35-75 t/hOperating pressure: 1.25-5.4 MPaOperating temperature: 194-485℃Applicable to b... |
 |
SZL Series Biomass Steam Boiler | Seller: Hebei Genjux Boiler Co.,Ltd | Capacity: 6-35 t/hWorking pressure: 1.0-2.5 MPaOperating temperature: 184-350 ℃Applicable fuel bi... |
