Automatic radiant protective performance tester

Whats/App: +86 156 1874 6768

Web: standard-groups.com

Application

Outdoor Sports Gear: Evaluating the waterproof breathability and thermal balance of fabrics for jackets, ski suits, and mountaineering apparel.

Specialized Protective Clothing: Testing thermal protection and moisture-wicking performance of firefighting suits, military combat uniforms, and medical protective garments.

High-Performance Fabrics: Evaluating multilayer composite materials for extreme environments like spacesuits and deep-sea diving suits.

Bedding & Interiors: Monitoring thermal resistance properties of sleeping bags, carpets, and automotive seat materials to enhance comfort at home and on the go.

Membrane Material Research: Assisting R&D personnel in testing technical specifications of moisture-permeable components like microporous membranes and non-porous hydrophilic films.

Standards

NFPA 1971：Standard on Protective Ensembles for Structural Fire Fighting and Proximity Fire Fighting

NFPA 2112：Standard on Flame-Resistant Garments for Protection of Industrial Personnel Against Flash Fire

BS EN ISO 6942：Protective clothing — Protection against heat and fire — Method of test: Evaluation of materials and material assemblies when exposed to a source of radiant heat

EN 366：Protective clothing — Protection against heat and fire — Method of test: Determination of resistance to molten metal splash

ASTM F2702：Standard Test Method for Determining the Heat Transfer Through Materials Used in Protective Clothing Using a Hot Surface

ASTM F1939：Standard Test Method for Radiant Heat Resistance of Flame Resistant Clothing Materials With Continuous Heating

Feature

◆Evaluation of flame retardant properties of flame retardant materials

◆Detect abnormalities and reduce accidents

◆Calculate the RPP value

◆Evaluate thermal protection performance

◆Improve job safety

◆Improve the quality control system

Technical Parameters

Items	Parameters
Heating power	6.5Kw/220V/50Hz
Heating length	178mm, diameter 8mm
Heat flux density	10Kw/m2-80Kw/m2
Radiation source temperature control	－1200℃±5℃
Thermal radiation source temperature sensor	Thermocouple (0 ℃ -1600 ℃)
Calorimeter heat capacity	480.937J/K
Heating area	50mm2×50mm2
Calorimeter temperature range	－80℃
Test environment	Between 15 ℃ -35 ℃ ,the room without air circulation

Test Procedures

System Preheating: Power on the instrument, set the test plate temperature (e.g., 35°C) and ambient chamber temperature/humidity, allowing the system to reach stable equilibrium.

Thermal Resistance Test (Dry Test): Cover the test plate with a dry sample and measure the constant heat flux required to maintain the temperature difference under water-free conditions.

Wet Resistance Test (Wet Test): Cover the test plate with a semi-permeable membrane simulating skin and inject distilled water.

Sample Installation: Place the test sample flat over the semi-permeable membrane and activate the parallel airflow system.

Data Acquisition: After the system re-establishes dynamic equilibrium, record the heat consumed by water vapor evaporation via software.

Calculation Results: Software automatically subtracts no-load resistance, outputting the material's final thermal resistance ($R_{ct}$) and wet resistance ($R_{et}$) values.

Maintenance Information

Water Circuit Cleaning: Wet resistance testing must use medical-grade distilled water or deionized water. Tap water is strictly prohibited to prevent scaling and clogging of the porous plate.

Sensor Protection: Keep the gap between the protective ring and the test plate edge clean to prevent fiber debris from affecting airflow distribution.

Calibration Recommendation: Periodically verify the system's heat flux response using a standard calibration plate.

Long-Term Storage: If the moisture resistance function remains unused for extended periods, drain the water supply lines and keep the test plate surface dry.

Другие товары поставщика

	Oil Thread Leak Test System，ISO 16890 oil thread sealing performance tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com Test System for oil thread leak test of HEPA filter according to ISO 29463-4 (EN 1822-4). T...
	Torque - to - Failure Tester for Metal Bone - connecting Screws	Standard YY/T 0662-2008(Chinese standard for orthopedic implant testing) ISO 5832-1(Metallic materials for surgical implants – Wrought stai...
	Flammability test furnace for building materials,Flammability testing chamber for building materials	Whats/App: +86 156 1874 6768 Web: standard-groups.com Product Introduction: Touch screen control building materials flammability test furnace ad...
	Thermal Humidity Chamber	Features and Benefits 1.Avariety of temperature and humidity change modesare supported, such as linear rise cooling/humidity, step jump cooling/hu...
	Contact heat transmission test machine	Whats/App: +86 156 1874 6768 Web: standard-groups.com Introduction: This part of ISO 12127 specifies a test method designed to evaluate the he...

Все товары поставщика

Похожие товары

	Custom five-finger scratch testing system	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications The Five-Finger Scratch Tes...
	Cross cut adhesion testing equipment supplier	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards PV 3952 Plastic interior parts...
	Automatic radiant protective performance tester	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Application Outdoor Sports Gear: Evaluat...
	Clothing Wearing Tactile Pressure Tester	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Application You use this tester to asses...
	Splash and spray liquid resistance testing system supplier	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Application You use this tester to asses...