Automated high-pressure steam spray chamber
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Standards
The Steam Jet Test Chamber complies with a broad set of international automotive and industrial standards, including:
DIN EN 16925:2014-06 – German and European standards for environmental and mechanical performance testing of coatings and materials
DBL 5416 – German DBL internal engineering standard for component durability and functionality
Ford BO 160-04 – Ford engineering standard for functional and reliability testing of components
GM 9531 – General Motors global engineering standard for material and component durability
Volvo STD 423-0015 – Volvo Group internal standard for functional and durability testing of components
VW PV 1503 – Volkswagen Group specification for material and functional performance
BMW AA-0136 – BMW Group engineering standard for system component functionality and durability
Renault D 252018 – Renault engineering standard for component performance and testing
PSA D 255376 – PSA Group engineering standard for component functionality and durability
MAN M 3022 – MAN Commercial Vehicles internal standard for component performance and durability
Parameters
| Parameter | Details |
|---|---|
| Flow Rate | 14.8 L/min |
| Working Pressure (P) | 30 – 140 bar (adjustable via external pressure valve) |
| Motor (N) | 6.5 kW, 400 V |
| Plug | 32 A, 5-pole |
| Water Supply | 2 – 3 bar, 15°C |
| Nozzle Distance | 0 – 450 mm |
| Test Angles | 90°, 45°, 30° ±2° |
| Other Components | Door with inspection glass, exhaust Ø 102 mm, connectors, discharge port with dirt filter |
| Base Frame | Stainless steel with enclosure and four guide rails |
| Sterilization/Water Replacement | Automatic weekly cycle: water heated to 68°C, sprayed through nozzles; stops at 70°C; manual water replacement possible. Cooling to working temperature required after sterilization, can be accelerated with cold water addition |
| Door Locking | Electromagnetic locking during pump operation; door cannot be opened while pump is running |
| Heating Vessel | 9.0 kW, max temperature 80°C ±2°C, digital display, preheat time 1 hour |
Features
All medium-contact parts are rust-resistant and suitable for deionized water.
Ceramic plunger pump with direct-drive motor ensures high safety and minimal wear.
Steam injection duration adjustable from 1 second to 9 minutes.
External pressure control valve allows precise adjustment depending on nozzle specifications.
Equipped with door inspection glass, dirt filters, and exhaust port for safe operation.
Automatic sterilization/water replacement system with temperature control.
Electromagnetic door locking ensures safety during pump operation.
Heating vessel with digital temperature display and controlled preheating.
Accessories
Horizontal sliding unit
Exhaust fan
Laser pointer
Flow meter
Volume-measuring testing equipment (in liters)
Clamping device
Test Procedures
Install the component to be tested inside the chamber and connect the water supply.
Set the nozzle distance and test angle according to the manufacturer’s specifications.
Adjust working pressure via the external control valve.
Configure the steam injection duration on the display (1 second – 9 minutes).
Start the pump using the control unit; the door will automatically lock for safety.
Monitor real-time parameters including pressure, flow, and temperature.
After completion, allow the system to cool to working temperature; perform sterilization/water replacement if required.
Remove tested components and review recorded data for evaluation.
Maintenance Information
Inspect the pump and ceramic plunger for wear and proper operation.
Check pressure valves and flow control system for functionality.
Clean the chamber, inspection glass, and discharge filters regularly.
Perform weekly sterilization/water replacement cycles and monitor water quality.
Verify heating vessel operation and temperature calibration periodically.
Check electromagnetic door locking system for safety compliance.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Taber Abrasion Tester (Double-Head) | Whats/App: +86 156 1874 6768 Web: standard-groups.com Taber Abrasion Tester (Double-Head) is used for abrasion and wear resistance testing. It me... |
 |
Cloth Bowing Evaluation Device | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The instrument is widely used in: Textile R&D: Quantifying fabric hand fe... |
 |
Thermal cycle wet freezing testing machine | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Thermal Cycle Wet Freezing Testing Machine is designed for comprehensive environmental ... |
 |
Dental Implants Static Torsion Testing Machine | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard ISO 13498: Specifies static torsion testing protocols for dental implants, includ... |
 |
Chest Drainage Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The thoracic drainage tester is widely applied in the medical field, mainly used for monito... |
Похожие товары
 |
Laser Cutting Machines | Продавец: Chanxan (Changshu) Laser Technology Co., Ltd. | Laser Cutting Machines PrecisionLaser Cutting Systemsfor Film, Glass & Industrial Materials ... |
 |
Precision Laser Micromachining Machine | Продавец: Chanxan (Changshu) Laser Technology Co., Ltd. | Precision Laser Micromachining Machine| Ultrafast Laser Micromachining Systems Chanxan provides ... |
 |
Ultrafast Laser Systems | Продавец: Chanxan (Changshu) Laser Technology Co., Ltd. | Ultrafast Laser Systems Femtosecond Laser System Ultra-precision femtosecond laser systemfor hi... |
 |
Industrial Laser Equipment Manufacturer | Продавец: Chanxan (Changshu) Laser Technology Co., Ltd. | Industrial Laser Equipment Manufacturer for Precision Cutting, Marking & Micromachining Chan... |
 |
Common Rail Injector Valve F00R J02 012 | Продавец: 868983 | Common Rail Injector Valve F00R J02 012 David Chen |
