Automated high-pressure steam spray chamber
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Standards
The Steam Jet Test Chamber complies with a broad set of international automotive and industrial standards, including:
DIN EN 16925:2014-06 – German and European standards for environmental and mechanical performance testing of coatings and materials
DBL 5416 – German DBL internal engineering standard for component durability and functionality
Ford BO 160-04 – Ford engineering standard for functional and reliability testing of components
GM 9531 – General Motors global engineering standard for material and component durability
Volvo STD 423-0015 – Volvo Group internal standard for functional and durability testing of components
VW PV 1503 – Volkswagen Group specification for material and functional performance
BMW AA-0136 – BMW Group engineering standard for system component functionality and durability
Renault D 252018 – Renault engineering standard for component performance and testing
PSA D 255376 – PSA Group engineering standard for component functionality and durability
MAN M 3022 – MAN Commercial Vehicles internal standard for component performance and durability
Parameters
| Parameter | Details |
|---|---|
| Flow Rate | 14.8 L/min |
| Working Pressure (P) | 30 – 140 bar (adjustable via external pressure valve) |
| Motor (N) | 6.5 kW, 400 V |
| Plug | 32 A, 5-pole |
| Water Supply | 2 – 3 bar, 15°C |
| Nozzle Distance | 0 – 450 mm |
| Test Angles | 90°, 45°, 30° ±2° |
| Other Components | Door with inspection glass, exhaust Ø 102 mm, connectors, discharge port with dirt filter |
| Base Frame | Stainless steel with enclosure and four guide rails |
| Sterilization/Water Replacement | Automatic weekly cycle: water heated to 68°C, sprayed through nozzles; stops at 70°C; manual water replacement possible. Cooling to working temperature required after sterilization, can be accelerated with cold water addition |
| Door Locking | Electromagnetic locking during pump operation; door cannot be opened while pump is running |
| Heating Vessel | 9.0 kW, max temperature 80°C ±2°C, digital display, preheat time 1 hour |
Features
All medium-contact parts are rust-resistant and suitable for deionized water.
Ceramic plunger pump with direct-drive motor ensures high safety and minimal wear.
Steam injection duration adjustable from 1 second to 9 minutes.
External pressure control valve allows precise adjustment depending on nozzle specifications.
Equipped with door inspection glass, dirt filters, and exhaust port for safe operation.
Automatic sterilization/water replacement system with temperature control.
Electromagnetic door locking ensures safety during pump operation.
Heating vessel with digital temperature display and controlled preheating.
Accessories
Horizontal sliding unit
Exhaust fan
Laser pointer
Flow meter
Volume-measuring testing equipment (in liters)
Clamping device
Test Procedures
Install the component to be tested inside the chamber and connect the water supply.
Set the nozzle distance and test angle according to the manufacturer’s specifications.
Adjust working pressure via the external control valve.
Configure the steam injection duration on the display (1 second – 9 minutes).
Start the pump using the control unit; the door will automatically lock for safety.
Monitor real-time parameters including pressure, flow, and temperature.
After completion, allow the system to cool to working temperature; perform sterilization/water replacement if required.
Remove tested components and review recorded data for evaluation.
Maintenance Information
Inspect the pump and ceramic plunger for wear and proper operation.
Check pressure valves and flow control system for functionality.
Clean the chamber, inspection glass, and discharge filters regularly.
Perform weekly sterilization/water replacement cycles and monitor water quality.
Verify heating vessel operation and temperature calibration periodically.
Check electromagnetic door locking system for safety compliance.
Send product request
Other supplier products
 |
Adhesion tensile load test machine | Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications The hot - tack tensile tester is an instrument specifically designed to test ... |
 |
ASTM E84 Thermal Insulation Fire Test Equipment Supplier Factory Direct | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Parameters ParameterSpecification Dimensions 1220 × 570 &t... |
 |
Photovoltaic module wire tube bending testing machine | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard IEC 61730-2:2004: Photovoltaic (PV) Module Safety Qualification – Requireme... |
 |
Nonwovens Liquid Loss Tester | ISO 9073-6 Nonwoven Fabric Absorption Testing Machine | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Test Principle A standard absorbent medium is placed beneath the nonwoven sa... |
 |
Five-Finger Scratch Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Five-Finger Scratch Tester is a precision instrument designed to assess the scratch res... |
Same products
 |
PanEVAP & MVR system | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
 |
PanPHE gasketed plate heat exchangers | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanPHE gasketed plate heat exchangersare designed with easy access for regular servicing and for ... |
