Automatic Kinematic Viscosity Tester
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Standards
You can operate this tester in compliance with the following standards:
(1) GB/T 265-2017 – Petroleum Products: Determination of Kinematic Viscosity.
(2) ASTM D445-2020 – Kinematic Viscosity of Transparent and Opaque Liquids (for dynamic viscosity calculation).
(3) ISO 3104:2021 – Petroleum Products: Determination of Kinematic Viscosity.
(4) IP 71:2020 – Petroleum Products: Determination of Kinematic Viscosity.
Parameters
| Parameter | Unit | Value |
|---|---|---|
| Applicable Fluid | – | Newtonian liquids |
| Heating Method | – | Water bath with constant temperature electric heating |
| Test Capillaries | pcs | 5 (simultaneous testing) |
| Heating Medium | – | Clean water |
| Temperature Range | ℃ | Room temperature – 100 |
| Heating Power | W | 1700 |
| Temperature Control | – | Automatic, ±0.1℃ |
| Bath Dimensions | mm | Φ300 × 300 |
| Overall Dimensions | mm | 540 × 370 × 640 |
Features
High accuracy and repeatability; simple and user-friendly operation.
Efficient insulation material ensures superior temperature stability compared to traditional dual-bath designs.
Powerful stirring motor ensures uniform temperature distribution, improving measurement consistency.
High-precision automatic temperature control with ±0.1℃ accuracy.
Standard bath volume provides stable thermal conditions for accurate testing.
Five simultaneous testing channels increase experimental efficiency.
Specialized viscosity meter clamp ensures safe, reliable handling of capillaries.
Accessories
(1) Capillary Viscometers: Calibrated for measuring flow time.
(2) Clamps: Specialized fixtures for secure holding of viscometers.
(3) Thermostatic Bath: With stirring function to maintain uniform temperature.
(4) Heating Control Instrument: Automatic temperature control.
(5) Stirring Motor: Ensures even temperature distribution in the bath.
(6) Power Cable: Standard 220 V, 50 Hz.
(7) Clean Water: Used as the heating medium.
(8) Temperature Sensor: Real-time monitoring of bath temperature.
Test Procedures
Fill the thermostatic bath with clean water and start the stirring motor.
Set the target temperature and wait until the system stabilizes.
Place the capillary viscometer into the clamp and inject the sample liquid.
Start timing as the liquid flows through the capillary.
Record the flow time and calculate the kinematic viscosity using the capillary constant.
Calculate dynamic viscosity by combining the measured kinematic viscosity with the liquid density.
After testing, clean the viscometers and clamps to maintain instrument hygiene.
Maintenance Information
Regularly inspect capillaries for cracks or residue.
Ensure the bath water is clean and replenished as needed.
Verify the stirring motor and heating system are functioning correctly.
Maintain the clamps and viscometer holders for secure operation.
Record all measurements and maintenance actions for traceability.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Fully Automatic Falling Sand Abrasion Test Equipment | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards YS/T 1186-2017: Falling Sand Tester Type B for Anodized Aluminum and Organic Pol... |
 |
Digital Wool Fineness Measurement System | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Fiber fineness analyzer Mainly used for the determination of wool, rabbit hai... |
 |
Degradation Testing chamber for PV Modules | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The Light Decay Test Chamber is a high-precision indoor exposure system speci... |
 |
Benchtop High-Precision Material Thermal Conductivity Tester (Guarded Hot Plate Heat Flow Meter Method) | Whats/App: +86 156 1874 6768 Web: standard-groups.com Benchtop High-Precision Material Thermal Conductivity Tester (Guarded Hot Plate Heat Flow M... |
 |
Timken Test Machine | Whats/App: +86 156 1874 6768 Web: standard-groups.com The extreme pressure friction testing machine mainly consists of a main frame, a spindle tr... |
Похожие товары
 |
Высокоскоростная экструзионная линия для производства гофрированных труб с двойными стенками из ПЭВП с водяным охлаждением | Продавец: Shandong HUASU Plastic Technology Co.,Ltd. | Формы имеют структуру с двойным каналом потока и фильерную головку, обработанную азотированием и ... |
 |
PanEVAP & MVR system | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
