Automatic Kinematic Viscosity Tester
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Standards
You can operate this tester in compliance with the following standards:
(1) GB/T 265-2017 – Petroleum Products: Determination of Kinematic Viscosity.
(2) ASTM D445-2020 – Kinematic Viscosity of Transparent and Opaque Liquids (for dynamic viscosity calculation).
(3) ISO 3104:2021 – Petroleum Products: Determination of Kinematic Viscosity.
(4) IP 71:2020 – Petroleum Products: Determination of Kinematic Viscosity.
Parameters
| Parameter | Unit | Value |
|---|---|---|
| Applicable Fluid | – | Newtonian liquids |
| Heating Method | – | Water bath with constant temperature electric heating |
| Test Capillaries | pcs | 5 (simultaneous testing) |
| Heating Medium | – | Clean water |
| Temperature Range | ℃ | Room temperature – 100 |
| Heating Power | W | 1700 |
| Temperature Control | – | Automatic, ±0.1℃ |
| Bath Dimensions | mm | Φ300 × 300 |
| Overall Dimensions | mm | 540 × 370 × 640 |
Features
High accuracy and repeatability; simple and user-friendly operation.
Efficient insulation material ensures superior temperature stability compared to traditional dual-bath designs.
Powerful stirring motor ensures uniform temperature distribution, improving measurement consistency.
High-precision automatic temperature control with ±0.1℃ accuracy.
Standard bath volume provides stable thermal conditions for accurate testing.
Five simultaneous testing channels increase experimental efficiency.
Specialized viscosity meter clamp ensures safe, reliable handling of capillaries.
Accessories
(1) Capillary Viscometers: Calibrated for measuring flow time.
(2) Clamps: Specialized fixtures for secure holding of viscometers.
(3) Thermostatic Bath: With stirring function to maintain uniform temperature.
(4) Heating Control Instrument: Automatic temperature control.
(5) Stirring Motor: Ensures even temperature distribution in the bath.
(6) Power Cable: Standard 220 V, 50 Hz.
(7) Clean Water: Used as the heating medium.
(8) Temperature Sensor: Real-time monitoring of bath temperature.
Test Procedures
Fill the thermostatic bath with clean water and start the stirring motor.
Set the target temperature and wait until the system stabilizes.
Place the capillary viscometer into the clamp and inject the sample liquid.
Start timing as the liquid flows through the capillary.
Record the flow time and calculate the kinematic viscosity using the capillary constant.
Calculate dynamic viscosity by combining the measured kinematic viscosity with the liquid density.
After testing, clean the viscometers and clamps to maintain instrument hygiene.
Maintenance Information
Regularly inspect capillaries for cracks or residue.
Ensure the bath water is clean and replenished as needed.
Verify the stirring motor and heating system are functioning correctly.
Maintain the clamps and viscometer holders for secure operation.
Record all measurements and maintenance actions for traceability.
在线联系供应商
Other supplier products
 |
Industrial Rubber Mooney Viscosity Testing Equipment ASTM International | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards (1) GB/T 1232 — Unvulcanized rubber: Determination of Mooney... |
 |
Metal Corrosion Rate Measurement Device | Whats/App: +86 156 1874 6768 Web: standard-groups.com standards GB/T 15970 ISO 7539 ASTM G31 GB/T 10125 Scope of Application The metal corr... |
 |
KES - G5 Compression Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Compression Tester analyzes hand movements-particularly, movements by finger-performed ... |
 |
Cable extension and strength machine | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Metallic Cables and Wire Ropes Mechanical Property Testing Machine is a specialized tes... |
 |
ISO 1431 Automotive Wire Ozone Resistance Tester Supplier | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Features (1) Dual-Zone Climate Control – Maintains precise temperature... |
Same products
 |
HDPE高速水冷双壁波纹管生产线 | 卖方: Shandong HUASU Plastic Technology Co.,Ltd. | 机头模具采用双流道结构、氮化磨光处理机头，偏壁调整方便快捷，保证内外层壁厚均匀和稳定成型。 最新设计密闭压力水冷冷却结构，冷却充分，多点分布真空系统，效率更高，生产速度更快。 双层在线扩口功... |
 |
PanEVAP & MVR system | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
