Automatic dual flat-panel thermal conductivity detector

Whats/App: +86 156 1874 6768

Web: standard-groups.com

Standards

GB/T 10294-2008:Determination of Steady State Thermal Resistance and Related Properties of Thermal Insulation Materials

GB/T 3399-1982:Test method for thermal conductivity of plastics - Heat - resistant plate method

GB/T 10801.1-2002:Thermal insulation polystyrene foam

GB/T 10801.2-2002:Extruded polystyrene foam

GB/T 3139-2005:Test method for thermal conductivity of fiber reinforced plastics

GB/T 17794-2008:Flexible foam rubber and plastic insulation products

ASTM C518:Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus

IS0 8301:Thermal Insulation — Determination of Steady-State Thermal Resistance and Related Properties — Heat Flow Meter Apparatus

DIN EN 12667:Thermal Performance of Building Materials and Products - Determination of Thermal Resistance by Means of Guarded Hot Plate and Heat Flow Meter Methods - Products of High and Medium Thermal Resistance

Features

Chassis is nice. Test box shell uses spray method. It has strong mechanical strength, anti-corrosion

The device is small and the unique casters are designed to increase the flexibility of the thermometer movement.

High safety performance. It not only adopts the use of circuit and refrigeration cycle independent design, but also can ensure that the electrical part of the collected data from the impact of water, and improve stability.

Good performance of temperature stability and unique protection board design, can form a one-dimensional protection, so that it has no loss of temperature.

Online double standard company unique technology which can calibrate the temperature, calibration system error, is accurate, fast and convenient.

Technical Parameters

Items	Parameters
Specimen standard size	300mm × 300mm × H (5 ~ 40) mm
Specimen flatness	0.1mm
Thermal conductivity measurement display range	(0.001 ~ 2.000) W / (m • K)
Thermal conductivity measurement accuracy	± 3%
Thermal conductivity measurement Repeatability	± 1%
Temperature resolution	0.01 ℃
Temperature control accuracy	0.05 ℃

Different types of thermal conductivity tester temperature measurement range	Model	Cold plate temperature control interface ℃	Hot plate temperature control range ℃
	IMDRY3001-I	Room temperature - 95 ℃	Room temperature - 100 ℃
	IMDRY3001-Ⅱ	-℃ -5 ℃ - 95 ℃	15 ℃ - 95 ℃
	IMDRY3001-Ⅲ	-10 ℃ - 95 ℃	10 ℃ - 95 ℃
	IMDRY3001-IV	-15 ℃ - 95 ℃	5 ℃ - 95 ℃
	IMDRY3001-V	-20 ° C - 95 ° C	0 ° C - 95 ° C
	IMDRY3001-Ⅵ	-30 ℃ -95 ℃	-10 ℃ -95 ℃
	IMDRY3001-VII	-40 ℃- 95 ℃	-20 ℃ - 95 ℃
Power supply	AC 220V ± 10%, 2.5KW
Specimen thickness	Standard 25mm, range (5 ~ 40) mm
Specimen thermal resistance requirements	the thermal resistance of the specimen should not be less than 0.1 (m2 • K) / W, and should meet the thickness of the standard thickness Requirements; if the lower limit of thermal resistance of the specimen is as low as 0.02 (m2 • K) / W, the accuracy does not necessarily meet the requirements.
Clamping force	No more than 2.5kPa

Test Procedures

First: Prepare the accessories and test samples;

Open the instrument's test chamber;

Place the sample inside the chamber;

Close and lock the test chamber lid;

Measure the sample thickness using a depth gauge;

Open the positioning rod on the side of the chamber and flip it over;

Release the positioning rod;

Place another sample inside this chamber (the instrument has two identical heating units);

Turn on the low-temperature bath and power switch;

Pour in a certain amount of water;

Turn on the instrument and access the LCD screen operating interface;

Set the hot plate temperature, sample thickness, preheating time, and test time, etc.;

Click "Start";

The system forms a thermal cycle, and the sample is tested;

When the set time is reached, the instrument automatically stops. Open the chamber and remove the sample;

The test is complete. Turn off the instrument;

Analyze and compare the test data to evaluate the material's thermal conductivity.

Другие товары поставщика

	Automotive Blow-By Test Equipment	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards This system supports, or is applicable in accordance with, the following: (1) I...
	Gloss Meter	Standard The SpectroColor Pro S Series Gloss Meter adheres to stringent automotive interior quality control standards, includingISO 2813. ASTM D52...
	Custom Syringe needle flow tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com Application This tester is suitable for a wide range of medical devices, including: (1) D...
	Camera test light box	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard ISO 12233: Compliant with SFR (Spatial Frequency Response) testing for lens resol...
	Catheter Flow Meter	The Catheter Flow Meter is specifically designed for measuring the water flow rate of medical catheters, including non-vascular catheters, intravas...

Все товары поставщика

Похожие товары

	Bending deformation suture needle instrument	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards YY/T 0043 :Medical Suture Need...
	Anchoring force guide pin device	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The device is designed to meet...
	Bend strength catheter testing apparatus	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The instrument is designed to ...
	Advanced guide wire friction tester instrument	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The instrument is designed to ...
	Automated needle flow tester for syringes	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The instrument is designed to ...