Automatic dual flat-panel thermal conductivity detector

Whats/App: +86 156 1874 6768

Web: standard-groups.com

Standards

GB/T 10294-2008:Determination of Steady State Thermal Resistance and Related Properties of Thermal Insulation Materials

GB/T 3399-1982:Test method for thermal conductivity of plastics - Heat - resistant plate method

GB/T 10801.1-2002:Thermal insulation polystyrene foam

GB/T 10801.2-2002:Extruded polystyrene foam

GB/T 3139-2005:Test method for thermal conductivity of fiber reinforced plastics

GB/T 17794-2008:Flexible foam rubber and plastic insulation products

ASTM C518:Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus

IS0 8301:Thermal Insulation — Determination of Steady-State Thermal Resistance and Related Properties — Heat Flow Meter Apparatus

DIN EN 12667:Thermal Performance of Building Materials and Products - Determination of Thermal Resistance by Means of Guarded Hot Plate and Heat Flow Meter Methods - Products of High and Medium Thermal Resistance

Features

Chassis is nice. Test box shell uses spray method. It has strong mechanical strength, anti-corrosion

The device is small and the unique casters are designed to increase the flexibility of the thermometer movement.

High safety performance. It not only adopts the use of circuit and refrigeration cycle independent design, but also can ensure that the electrical part of the collected data from the impact of water, and improve stability.

Good performance of temperature stability and unique protection board design, can form a one-dimensional protection, so that it has no loss of temperature.

Online double standard company unique technology which can calibrate the temperature, calibration system error, is accurate, fast and convenient.

Technical Parameters

Items	Parameters
Specimen standard size	300mm × 300mm × H (5 ~ 40) mm
Specimen flatness	0.1mm
Thermal conductivity measurement display range	(0.001 ~ 2.000) W / (m • K)
Thermal conductivity measurement accuracy	± 3%
Thermal conductivity measurement Repeatability	± 1%
Temperature resolution	0.01 ℃
Temperature control accuracy	0.05 ℃

Different types of thermal conductivity tester temperature measurement range	Model	Cold plate temperature control interface ℃	Hot plate temperature control range ℃
	IMDRY3001-I	Room temperature - 95 ℃	Room temperature - 100 ℃
	IMDRY3001-Ⅱ	-℃ -5 ℃ - 95 ℃	15 ℃ - 95 ℃
	IMDRY3001-Ⅲ	-10 ℃ - 95 ℃	10 ℃ - 95 ℃
	IMDRY3001-IV	-15 ℃ - 95 ℃	5 ℃ - 95 ℃
	IMDRY3001-V	-20 ° C - 95 ° C	0 ° C - 95 ° C
	IMDRY3001-Ⅵ	-30 ℃ -95 ℃	-10 ℃ -95 ℃
	IMDRY3001-VII	-40 ℃- 95 ℃	-20 ℃ - 95 ℃
Power supply	AC 220V ± 10%, 2.5KW
Specimen thickness	Standard 25mm, range (5 ~ 40) mm
Specimen thermal resistance requirements	the thermal resistance of the specimen should not be less than 0.1 (m2 • K) / W, and should meet the thickness of the standard thickness Requirements; if the lower limit of thermal resistance of the specimen is as low as 0.02 (m2 • K) / W, the accuracy does not necessarily meet the requirements.
Clamping force	No more than 2.5kPa

Test Procedures

First: Prepare the accessories and test samples;

Open the instrument's test chamber;

Place the sample inside the chamber;

Close and lock the test chamber lid;

Measure the sample thickness using a depth gauge;

Open the positioning rod on the side of the chamber and flip it over;

Release the positioning rod;

Place another sample inside this chamber (the instrument has two identical heating units);

Turn on the low-temperature bath and power switch;

Pour in a certain amount of water;

Turn on the instrument and access the LCD screen operating interface;

Set the hot plate temperature, sample thickness, preheating time, and test time, etc.;

Click "Start";

The system forms a thermal cycle, and the sample is tested;

When the set time is reached, the instrument automatically stops. Open the chamber and remove the sample;

The test is complete. Turn off the instrument;

Analyze and compare the test data to evaluate the material's thermal conductivity.

Other supplier products

	Custom Suture Needle Elasticity and Toughness Tester	Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The Elasticity and Toughness Tester for Suture Needles is a specialized devic...
	Industrial car wash simulator supplier	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The simulator supports compliance with the following international standards: I...
	ISO Industrial Combustion Exhaust Gas Treatment System	Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The Combustion Flue Gas Treatment System is designed to purify flue gases gen...
	ISO Standard Filter Efficiency Testing Equipment Manufacturer	Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards (1) JG/T 22-1999 Test methods for performance of filters for gener...
	OEM Hydraulic Test System Manufacturer	Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The Hydraulic Multi-Pass Test Bench is a precision filtration testing system ...

All supplier products

Same products

	Laser Cutting Machines	Seller: Chanxan (Changshu) Laser Technology Co., Ltd.	Laser Cutting Machines PrecisionLaser Cutting Systemsfor Film, Glass & Industrial Materials ...
	Precision Laser Micromachining Machine	Seller: Chanxan (Changshu) Laser Technology Co., Ltd.	Precision Laser Micromachining Machine| Ultrafast Laser Micromachining Systems Chanxan provides ...
	Ultrafast Laser Systems	Seller: Chanxan (Changshu) Laser Technology Co., Ltd.	Ultrafast Laser Systems Femtosecond Laser System Ultra-precision femtosecond laser systemfor hi...
	Industrial Laser Equipment Manufacturer	Seller: Chanxan (Changshu) Laser Technology Co., Ltd.	Industrial Laser Equipment Manufacturer for Precision Cutting, Marking & Micromachining Chan...
	Common Rail Injector Valve F00R J02 012	Seller: 868983	Common Rail Injector Valve F00R J02 012 David Chen