Flex durability tester for export

Whats/App: +86 156 1874 6768

Web: standard-groups.com

Standards

ASTM F392: Test Method for the Flexural Resistance of Flexible Barrier Layer Materials

YY/T 0681.12: Test Methods for Sterile Medical Device Packaging - Part 12: Soft Barrier Materials - Resistance to Stretch

GB/T 41347-2022: Test Method for the Stretch Resistance of Flexible Packaging Materials

Features

7-inch touchscreen operation for convenient and quick setting of test parameters

Password login for four-level management access

Four sample stations easily enable combined tests under different conditions

Servo motor control ensures precise stroke positioning, further guaranteeing the accuracy of test results

Equipped with a mini printer for convenient data printing at any time

Brand-name drive motors offer strong environmental adaptability, stability, and durability

Precision-machined motion mechanisms ensure low-noise operation

Program limit protection and an emergency stop button provide both hardware and software protection for the instrument.

Technical Parameters

Technical Parameter	Specification
Rubbing Frequency	Usually adjustable, such as 45 times per minute, etc., used to simulate the rubbing frequencies that packaging materials may encounter in actual use.
Number of Rubbing Times	Usually, there are multiple modes available, such as Mode A (2700 times), Mode B (900 times), Mode C (270 times), etc., to meet different testing requirements. Some devices also support arbitrary settings of the number of rubbing times for more flexible testing.
Specimen Size	Determined according to testing standards or actual requirements, such as 120×30mm, etc. The selection of specimen size should ensure that it can fully reflect the rubbing resistance performance of the material.
Control System	An advanced control system enables automated operation, reducing human-induced errors. Meanwhile, the control system can also be used to set and control test conditions, such as the number of rubbing times and speed.
Monitoring System	It includes force sensors and other detection devices, used to monitor the state changes of specimens in real-time during the test. This is crucial for analyzing the durability of materials and identifying potential defects.
Safety Devices	To ensure the safety of operators, the rubbing resistance tester is usually equipped with various safety protection measures, such as emergency stop buttons and overload protection.

Accessoriess

The standard configuration of the Flex Durability Tester includes the main unit, a 7-inch HMI touchscreen, a PLC control system, a precision ball screw, and a servo motor. Additionally, the following accessories are provided:

Sample clamp: Used to fix the sample and ensure it does not shift during testing.

Pinhole detection device: Used to detect changes in the number of pinholes in the sample before and after the rubbing test.

Barrier performance testing device: Optional, used to detect changes in the barrier properties of the sample before and after the rubbing test.

Operator manual: Provides detailed instructions on instrument operation, maintenance, and other related information for user convenience.

Test Procedures

1. Equipment Preparation

Check the instrument's safety devices (emergency stop button, overload protection).

Connect the power supply and allow it to warm up. Confirm that the control system (including the display screen) and monitoring system (force sensor) are functioning normally.

2. Sample Preparation

Cut the sample according to the test standard (e.g., GB/T 41347) (e.g., 120x30mm), ensuring the sample surface is clean, undamaged, and meets the dimensional requirements for abrasion resistance testing.

3. Parameter Setting

Select the compliant standard (GB/T 41347/ISO/ASTM) via the display screen, and set the friction frequency (e.g., 45 times/minute), number of friction cycles (e.g., Mode A 2700 times), and other test conditions.

4. Sample Clamping

Fix the prepared sample onto the instrument fixture, ensuring secure clamping and proper alignment (for multi-sample positions).

5. Starting the Test

After confirming that the parameters and sample loading are correct, start the automatic test program. The instrument will run the friction test according to the set conditions, and the monitoring system will record the sample status in real time.

6. Post-Test Operation

After the automatic test ends, remove the sample and observe its wear condition (e.g., damage, degree of wear); export the test data recorded by the system and determine whether the abrasion resistance performance is qualified based on the standard.

Другие товары поставщика

	Battery Nail Penetration Tester	Battery Nail Penetration Tester is designed for evaluating the safety performance of lithium-ion batteries and battery packs under extreme internal...
	Appliance Stability meter	Whats/App: +86 156 1874 6768 Web: standard-groups.com Product Introduction The device conforms to GB4706-1 Article 20.1. IEC60335-1 Article 20.1...
	Wool Shrinkage Tester	YM116 type wool fold shrinkage tester is a precision instrument to determine the length of the towel under the standard tension. The instrument ad...
	Femoral Stem Fatigue Performance Testing Machine	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard YY/T 0809.4 (China): Specifies fatigue testing protocols for femoral stems in par...
	Aircraft Seat Cushion Fuel Burn Test System for Aviation Safety	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The system is designed to support testing in accordance with the following aeros...

Все товары поставщика

Похожие товары

	Surface adhesion testing equipment factory price	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards JIS L 1066 (Testing Methods fo...
	Continuous load scratch resistance tester manufacturer	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards ISO DIS 12137-2 (Plastics &mda...
	High precision continuous load surface tester	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards GB/T 6040-2008 Test Method for...
	Multi-function surface performance test system	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards GB/T 6040-2008 Test Method for...
	Laboratory tribology research equipment	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards GB/T 6040-2008 Test Method for...