Continuous load scratch resistance tester manufacturer
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Standards
ISO DIS 12137-2 (Plastics — Determination of Scratch Properties)
JIS K 5600 (Testing Methods for Paints)
Parameters
| Parameter | Specification |
|---|---|
| Sliding speed | 600 mm/min (return speed: 1200 mm/min) |
| Drive motor | Reversible motor |
| Drive mechanism | Rack and pinion transmission |
| Sliding distance | 100 mm |
| Vertical load | Continuous load: 0–50 g, 0–100 g, 0–200 g |
| Fixed load: 200 g | |
| Safety system | Overload protection, high-frequency noise suppression circuit |
| Overall dimensions | Main unit: W535 mm × D225 mm × H340 mm |
Features
Multiple test functions integrated into a single system
Scratch resistance testing in accordance with ISO DIS 12137-2. with scratch size evaluated by microscopic observation
Pencil hardness–type testing based on JIS K 5600. using a 45° inclined pencil to compare surface hardness
Surface smoothness measurement by recording sliding resistance of a flat fixture to calculate static and dynamic friction
Optional friction and wear analysis software enables quantitative evaluation of scratch resistance based on measured resistance
Accurate determination of critical loads corresponding to surface indentation and cracking through resistance variation analysis
Accessories
(1) Conical scratch needle set with rounded tips (0.005–1.0 mm radius options)
(2) Continuous loading weight set
(3) Fixed load weight
(4) Flat sliding fixture
(5) Power cable
(6) Tool set
(7) Operating manual
Optional: friction and wear analysis software
Test Procedures
Secure the test specimen firmly on the moving stage.
Select and install the appropriate scratch needle or test fixture.
Choose the required continuous or fixed load range.
Set the sliding speed and travel distance.
Perform system checks and ensure overload protection is active.
Start the test to apply progressive load during linear motion.
Observe scratch formation and record resistance data for analysis.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
| Puncture Strength Tester STD - NDG5 | Whats/App: +86 156 1874 6768 Web: standard-groups.com Compliance Standards ASTM D638 (Plastics Tensile Properties) ISO 13934-1 (Textile Tensile... | |
| Affordable Rubbing Colour Fastness Test Solution | Get a quote: Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards ASTM F1319 Standard test method for determining the antiwear and a... | |
| Geomembrane Fracture Resistance Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard ASTM D7176(Standard Test Method for Determining the Resistance of Geomembranes ... | |
| Textile Fiber Composition Analyzer | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard ASTM D276(Standard Test Method for Identification of Fibers in Textiles) ISO 1... | |
| Adiabatic Self - Accelerating Decomposition Temperature Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Product Introduction This product complies with "Recommendations on the Transport of Dange... |













