Continuous load scratch resistance tester manufacturer
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Standards
ISO DIS 12137-2 (Plastics — Determination of Scratch Properties)
JIS K 5600 (Testing Methods for Paints)
Parameters
| Parameter | Specification |
|---|---|
| Sliding speed | 600 mm/min (return speed: 1200 mm/min) |
| Drive motor | Reversible motor |
| Drive mechanism | Rack and pinion transmission |
| Sliding distance | 100 mm |
| Vertical load | Continuous load: 0–50 g, 0–100 g, 0–200 g |
| Fixed load: 200 g | |
| Safety system | Overload protection, high-frequency noise suppression circuit |
| Overall dimensions | Main unit: W535 mm × D225 mm × H340 mm |
Features
Multiple test functions integrated into a single system
Scratch resistance testing in accordance with ISO DIS 12137-2. with scratch size evaluated by microscopic observation
Pencil hardness–type testing based on JIS K 5600. using a 45° inclined pencil to compare surface hardness
Surface smoothness measurement by recording sliding resistance of a flat fixture to calculate static and dynamic friction
Optional friction and wear analysis software enables quantitative evaluation of scratch resistance based on measured resistance
Accurate determination of critical loads corresponding to surface indentation and cracking through resistance variation analysis
Accessories
(1) Conical scratch needle set with rounded tips (0.005–1.0 mm radius options)
(2) Continuous loading weight set
(3) Fixed load weight
(4) Flat sliding fixture
(5) Power cable
(6) Tool set
(7) Operating manual
Optional: friction and wear analysis software
Test Procedures
Secure the test specimen firmly on the moving stage.
Select and install the appropriate scratch needle or test fixture.
Choose the required continuous or fixed load range.
Set the sliding speed and travel distance.
Perform system checks and ensure overload protection is active.
Start the test to apply progressive load during linear motion.
Observe scratch formation and record resistance data for analysis.
在线联系供应商
Other supplier products
 |
High precision linear reciprocating wear tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application Friction and wear testing of metallic materials. Wear resistance evaluation o... |
 |
Demesia Zigzag Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Demesia Zigzag Tester is a professional device used to test the flexural resistance of ... |
 |
Rapid Crack Propagation Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard ISO 13477: Designed exclusively for determining critical pressure (Pc) and temp... |
 |
Battery impact tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Battery Impact Tester is designed for safety performance evaluation of lithium-ion cell... |
 |
IEC 62196 EV Charging Gun Air Tightness Tester Manufacturer | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards (1) GB/T 20234.1-2023 – Connection set for conductive chargi... |
Same products
 |
MMA-120 Handheld Arc Welder | 卖方: 871183 | The MMA-120 Handheld Arc Welder from ChuangLi Electronic Technology Co., Ltd. is designed for con... |
 |
SHX Series Circulating Fluidized Bed Steam Boiler | 卖方: Hebei Genjux Boiler Co.,Ltd | Capacity: 10-35 t/hWorking pressure: 1.25-2.5 MPaOperating temperature: 194-400 ℃Applicable to bi... |
 |
YQ(Y)W Series Oil/Gas Fired Vertical Thermal Oil Boiler | 卖方: Hebei Genjux Boiler Co.,Ltd | Capacity: 7000-29200 KWOperating pressure: 0.8-1.0 MPaOperating temperature: 320℃Operating mode: ... |
 |
DHL Series Coal-Fired Steam Boilers | 卖方: Hebei Genjux Boiler Co.,Ltd | Capacity: 35-75 t/hOperating pressure: 1.25-5.4 MPaOperating temperature: 194-485℃Applicable to b... |
 |
SZL Series Biomass Steam Boiler | 卖方: Hebei Genjux Boiler Co.,Ltd | Capacity: 6-35 t/hWorking pressure: 1.0-2.5 MPaOperating temperature: 184-350 ℃Applicable fuel bi... |
