Arc Resistance Tester

• 

Whats/App: +86 156 1874 6768

Web: standard-groups.com

Arc Resistance Tester is a special instrument necessary for simulated safety test items specified in GB1411. IEC61621. ASTMC495. UL746A and other standards.Arc resistance test system is a high-precision equipment specially developed for the test surface of electrical insulation materials, suitable for electrical insulation materials, plastics, films, resins, mica, ceramics, glass, insulating paints and other insulating materials arc resistance performance assessment, can also be applied to product testing and new materials electrical performance research purposes.

Comply with the standard

GB/T1411-2002 dry solid insulating material resistance to high voltage, small current arc discharge test (equivalent to IEC and ASTM D495 and other standards; in line with UL 746A and other test methods

Functional principle

Insulating materials to resist deterioration caused by high-voltage arc action, usually with a standard arc flame on the surface of the material caused by charring to the surface conductivity and the arc disappeared the time required to express the unit of seconds in the plate specimen plus two separated by a certain distance from the tungsten electrodes, depending on the need for high-frequency high-voltage current between the two poles to produce an arc, initially intermittent time is gradually shortened, and finally for the continuous arc and gradually increase the current, the material The material is subjected to gradually harsh arc conditions and eventually cause damage. Arc resistance for high-voltage switch or low-voltage high-current switch insulating materials have important significance, because in the switch opening and closing will often be subjected to arc action, only good arc resistance materials can be selected.

In electrical and electronic equipment within the insulating material when it is exposed to high voltage, small current arc discharge, between them to withstand the initial difference in the immediate surface damage occurs, arc discharge caused by local thermal and chemical decomposition and corrosion and ultimately in the insulating material on the formation of conductive channels, when the formation of conductive channels within the material under test, it can be determined that the material has failed.

Equipment parameters

1. Arc through the time error: 1/8s through 7/8s break ± 5ms, the rest of the program is better than ± 1ms

2. Regulator capacity: 1kVA

3. Rated test voltage: 12.5kV

4.Maximum test voltage: 15.0kV

5. Test voltage accuracy: <1.0%

6. Accuracy of current measurement: <1.0%

7. Electrode pressure on specimen: (0.5±0.05)N

8. Electrode material: tungsten rod

9. Electrode distance: (6.35±0.1)mm

10.Ambient temperature: (23±2)℃.

11.Ambient Humidity: (50±5)%

12. Power supply: 220V±5% 50Hz 10A

Другие товары поставщика

	Electric rolling wheel peeling testing machine	Whats/App: +86 156 1874 6768 Web: standard-groups.com Introduction Electronic pressure roller testing machine (automatic pressure roller machine...
	OEM air intake filter test system supplier	Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The Air Intake Filter Test System is designed for testing industrial air filt...
	Glow Wire Test Machine, IEC 60695-2-10，automatic glow wire tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com Introduction: This machine is designedaccording to IEC60695-2-10: 2000 standard "glowing f...
	Heat Flow Meter for Thermal Insulation Materials ASTM C518 Testing	Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards ASTM C518: Standard Test Method for Steady-State Thermal Transmiss...
	Advanced Vehicle and Aircraft Air Intake Filter Test System	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The system complies with: (1) ISO 5011 – Air filter test for combustion e...

Похожие товары

	Высокоскоростная экструзионная линия для производства гофрированных труб с двойными стенками из ПЭВП с водяным охлаждением	Продавец: Shandong HUASU Plastic Technology Co.,Ltd.	Формы имеют структуру с двойным каналом потока и фильерную головку, обработанную азотированием и ...
	PanEVAP & MVR system	Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat...
	PanGAP wide gap welded plate heat exchanger	Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel...
	PanBloc welded plate heat exchanger	Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac...
	PanBox welded plate heat exchanger	Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated...