Arc Resistance Tester
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Arc Resistance Tester is a special instrument necessary for simulated safety test items specified in GB1411. IEC61621. ASTMC495. UL746A and other standards.Arc resistance test system is a high-precision equipment specially developed for the test surface of electrical insulation materials, suitable for electrical insulation materials, plastics, films, resins, mica, ceramics, glass, insulating paints and other insulating materials arc resistance performance assessment, can also be applied to product testing and new materials electrical performance research purposes.
Comply with the standard
GB/T1411-2002 dry solid insulating material resistance to high voltage, small current arc discharge test (equivalent to IEC and ASTM D495 and other standards; in line with UL 746A and other test methods
Functional principle
Insulating materials to resist deterioration caused by high-voltage arc action, usually with a standard arc flame on the surface of the material caused by charring to the surface conductivity and the arc disappeared the time required to express the unit of seconds in the plate specimen plus two separated by a certain distance from the tungsten electrodes, depending on the need for high-frequency high-voltage current between the two poles to produce an arc, initially intermittent time is gradually shortened, and finally for the continuous arc and gradually increase the current, the material The material is subjected to gradually harsh arc conditions and eventually cause damage. Arc resistance for high-voltage switch or low-voltage high-current switch insulating materials have important significance, because in the switch opening and closing will often be subjected to arc action, only good arc resistance materials can be selected.
In electrical and electronic equipment within the insulating material when it is exposed to high voltage, small current arc discharge, between them to withstand the initial difference in the immediate surface damage occurs, arc discharge caused by local thermal and chemical decomposition and corrosion and ultimately in the insulating material on the formation of conductive channels, when the formation of conductive channels within the material under test, it can be determined that the material has failed.
Equipment parameters
1. Arc through the time error: 1/8s through 7/8s break ± 5ms, the rest of the program is better than ± 1ms
2. Regulator capacity: 1kVA
3. Rated test voltage: 12.5kV
4.Maximum test voltage: 15.0kV
5. Test voltage accuracy: <1.0%
6. Accuracy of current measurement: <1.0%
7. Electrode pressure on specimen: (0.5±0.05)N
8. Electrode material: tungsten rod
9. Electrode distance: (6.35±0.1)mm
10.Ambient temperature: (23±2)℃.
11.Ambient Humidity: (50±5)%
12. Power supply: 220V±5% 50Hz 10A
Send product request
Other supplier products
 |
Bag lifting fatigue testing machine | Whats/App: +86 156 1874 6768 Web: standard-groups.com This machine is suitable for up and down vibration fatigue test of plastic handbag, garbage... |
 |
Button Impact Machine | ASTM D5171 Button Impact Tester Manufacturer | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Features 1. Ensure the vertical alignment of tension; 2. Fixed button edge ... |
 |
Automatic Floor Scrubber Suction Performance Test System Factory Supplier | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards IEC 60312:2010 – Rotodynamic Vacuum Cleaners – Methods... |
 |
Xenon Arc Weather Ometer SI4000 | Whats/App: +86 156 1874 6768 Web: standard-groups.com SI4000Xenon Arc Weather Ometer utilizes a xenon lamp to simulate ideal natural climate and ... |
 |
ISO / ECE Standard Seat Belt and Seat Testing Equipment | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The Automotive Seat, Mounting Device and Seat Belt System Testing Machine is ... |
