PV ammonia corrosion test chamber
Get a quote：
Whats/App: +86 181 0160 0864
The Photovoltaic Ammonia Test Chamber is a high-precision environmental simulation facility specifically engineered to evaluate the corrosion resistance of PV modules in ammonia-rich atmospheres. Designed to address the unique challenges of agricultural and industrial installations, this chamber allows you to subject solar panels to controlled concentrations of ammonia gas, moisture, and heat. By replicating these harsh conditions, you can verify the long-term structural and electrical stability of your products before they are deployed in environments where high levels of ammonia are prevalent.
Applications
The Photovoltaic Ammonia Test Chamber is a testing device designed to evaluate the corrosion resistance of photovoltaic modules in ammonia environments, ensuring their long-term stable operation in harsh conditions such as industrial or agricultural settings.
Standards
IEC 62716: Photovoltaic (PV) modules—Ammonia corrosion testing (The core standard for this equipment).
IEC 61701: Salt mist corrosion testing of photovoltaic (PV) modules.
IEC 60068-2-52: Environmental testing—Part 2-52: Tests—Test Kb: Salt mist, cyclic (sodium chloride solution).
GB/T 2423.17 / GB/T 2423.18: Environmental testing for electric and electronic products—Salt mist testing methods.
IEC Draft 82/722/CDV: Specific requirements for integrated salt mist and ammonia gas exposure sequences.
Features
This equipment can independently perform all test procedures required by IEC 61701 and IEC Draft Standard 82/722/CDV. Specifically, spray testing at severity levels 1-6. damp heat storage, standard atmospheric environment testing, and sample cleaning phases are all completed within the NaCl corrosion chamber. Ammonia spray testing, damp heat storage, spray washing, and drying can all be performed within the NH3 corrosion chamber.
Parameters
| Item | Specifications |
|---|---|
| NH₃ Concentration | 0–10000 ppm (adjustable) |
| Ammonia Concentration Resolution | ±1 ppm |
| Temperature Control Range | 15°C ~ 70°C |
| Temperature Fluctuation | ≤ ±0.5°C |
| Temperature Deviation | ≤ ±1.0°C |
| Temperature Uniformity | ≤ ±2°C |
| Humidity Control Range | 40% ~ 100% RH (adjustable) |
| Humidity Deviation | ≤ ±2% RH |
| Humidity Uniformity | ≤ ±3% RH |
| Test Accuracy | ±2% |
Accessories
1.Ammonia Gas Dosing System: Precision mass flow controllers for accurate gas injection.
2.Ammonia Concentration Sensor: High-precision electrochemical or laser-based gas detectors.
3.Specimen Racks: Non-reactive, adjustable holders designed to support full-sized PV modules at standard angles.
4.Exhaust Scrubber Unit: A chemical neutralization system to safely treat ammonia-laden air.
5.NaCl Spray Module: Integrated nozzles and reservoir for salt mist phases (Standard Severity 1-6).
6.Deionized Water Rinse: Internal spray bars for automated sample cleaning between test stages.
Test Procedures
1.Preparation
Sample Preparation: Clean samples and secure them on the sample rack, ensuring they do not touch each other.
Solution Preparation: Prepare a 5% NaCl solution (pH 6.5-7.2) according to the standard.
2.Power-On Test
Power Connection: Connect the power supply and turn on the main switch.
3. Test Operation
Start Test: After confirming parameters are correct, press the “Start” button.
Spray Inspection: Once temperature is reached, the spray system will automatically activate. Observe spray uniformity.
4. Test Completion
Shutdown Procedure: Turn off the spray switch. Allow cooling to below 40°C before disconnecting power.
Sample Removal: Remove specimens for corrosion assessment.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Walk in High and Low Temperature Humidity Test Chamber | Get a quote： Whats/App: +86 181 0160 0864 The High and Low Temperature Humidity Test Chamber is a high-performance environmental simulation syste... |
 |
Surface Flame Spread Test Apparatus | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Surface Flame Spread Test Apparatus is a high-precision instrument designed fo... |
 |
Taber 5900 Reciprocating Abraser | Get a quote： Whats/App: +86 181 0160 0864 Fixed sample on a horizontal table, wearing it under the specified abrasive and load with the horizonta... |
 |
Digital Elmendorf Tearing Tester | Getaquote: Whats/App: +86 181 0160 0864 The new G308 Digital Dual-Pendulum Elmendorf Tearing Tester measures the tearing strength of materials us... |
 |
Air - tightness Testing Device for Automotive Connectors | Get a quote： Whats/App: +86 181 0160 0864 TheAir-Tightness Testing Device for Automotive Connectorsis designed to perform non-destructive airtigh... |
Похожие товары
 |
Laser Cutting Machines | Продавец: Chanxan (Changshu) Laser Technology Co., Ltd. | Laser Cutting Machines PrecisionLaser Cutting Systemsfor Film, Glass & Industrial Materials ... |
 |
Precision Laser Micromachining Machine | Продавец: Chanxan (Changshu) Laser Technology Co., Ltd. | Precision Laser Micromachining Machine| Ultrafast Laser Micromachining Systems Chanxan provides ... |
 |
Ultrafast Laser Systems | Продавец: Chanxan (Changshu) Laser Technology Co., Ltd. | Ultrafast Laser Systems Femtosecond Laser System Ultra-precision femtosecond laser systemfor hi... |
 |
Industrial Laser Equipment Manufacturer | Продавец: Chanxan (Changshu) Laser Technology Co., Ltd. | Industrial Laser Equipment Manufacturer for Precision Cutting, Marking & Micromachining Chan... |
 |
Common Rail Injector Valve F00R J02 012 | Продавец: 868983 | Common Rail Injector Valve F00R J02 012 David Chen |
