Five-Finger Scratch Tester

• 

Get a quote：

Whats/App: +86 181 0160 0864

The Five-Finger Scratch Tester is a precision instrument designed to assess the scratch resistance of automotive interior materials, plastics, rubbers, leathers, coated fabrics, coatings, composites, paints, inks, and soft metals. By using five independently controlled scratch fingers with adjustable weights and interchangeable tips, you can accurately quantify surface wear caused by physical abrasion under controlled loads and motion. This system provides reliable, repeatable data for product development, quality control, and performance verification.

Applications

The Five-Finger Scratch Tester is suitable for testing automotive interior materials, plastics, rubber, leather, coated fabrics, coated materials, composite materials, paints, inks, soft metals, and other industries. It is widely used in product quality control, performance verification for new product development, and testing by inspection agencies. It is applicable for determining material properties in production department quality control, third-party testing agencies, laboratory product performance verification, and quality and technical supervision departments.

Standards

FORD FLTM BN 108-13 Scratch Resistance Test for Automotive Exterior Components (e.g., Painted Plastic Surfaces)

General Motors DMN 3943 Test Method for Scratch Resistance of Automotive Interior Materials

Daimler-Chrysler LP-463DD-18-01 Surface Scratch Resistance Test for Automotive Interior Component Materials

Features

1. Utilizes an LCD screen to control and display the testing process, allowing users to freely configure parameters such as test load, stroke, and movement speed according to requirements. The unique sample fixture design ensures secure clamping and convenient operation.

2. The equipment employs high-quality stepper motor control with guide rail transmission for both lateral and longitudinal movements. This design minimizes clearance, delivers smooth motion with low noise, achieves high testing accuracy, ensures excellent data repeatability, and extends the equipment's service life.

Parameters

Accessories

Standard configuration

Optional accessories

Test Procedures

I. Preparation:

1. Inspect accessories: Ensure all components are present, including the scratching finger, weights, shaft rod, etc.

2. Secure Test Specimen: Place the test specimen flat on the testing platform and secure it with clamping blocks.

II. Installation and Parameter Setup:

1. Install Scratch Fingers: Attach scratch fingers (e.g., tungsten carbide tips) to the bottom of five independent shaft rods and hang weights.

2. Set Parameters: Configure test load (e.g., weight of weights), stroke distance, movement speed, and cycle via the LCD screen.

III. Test Execution:

1. Initiate Test: Activate the instrument. The guide rail begins transmission, and the scratching fingers scrape the sample surface back and forth according to preset parameters.

2. Observe the process: Ensure stable equipment operation during testing and avoid external interference.

IV. Conclusion and Analysis:

1. Stop the test: After the timer ends, the guide rail automatically stops. Raise the cross-axis support.

2. Remove the sample: Loosen the clamping block, remove the specimen, and inspect indicators such as scratch depth and width.

3. Evaluate data: Compare the scratch resistance of different specimens and analyze material properties.

Другие товары поставщика

	Dental Implants Static Torsion Testing Machine	Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Dental Implants Static Torsion Testing Machine is a specialized device designe...
	Adiabatic Accelerated Calorimeter	Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk An Accelerating Rate Calorimeter (ARC) is a high-precision thermal analysis instru...
	Guarded Heat Flow Meter	Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Guarded Heat Flow Meter is a precision instrument designed to measure the ther...
	Print rub tester / Ink Rub Tester	Product Introduction: Print friction testing machine is suitable for print, ink, photosensitive layer of PS plate, gloss oil and related products ...
	Spinneret Inspection Microscope	Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk ① Mechanical Components Overview 1. This machine employs an X-Y-Z three-axis moti...

Похожие товары

	Высокоскоростная экструзионная линия для производства гофрированных труб с двойными стенками из ПЭВП с водяным охлаждением	Продавец: Shandong HUASU Plastic Technology Co.,Ltd.	Формы имеют структуру с двойным каналом потока и фильерную головку, обработанную азотированием и ...
	PanEVAP & MVR system	Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat...
	PanGAP wide gap welded plate heat exchanger	Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel...
	PanBloc welded plate heat exchanger	Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac...
	PanBox welded plate heat exchanger	Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated...