Universal Abrasion Resistance Tester

Get a quote：

Whats/App: +86 181 0160 0864

The instrument can be used to flat grinding, mill grinding, edge grinding, folding grinding and anti-frost, edge-close and fleeceand other wear-resistant test, can be used for woven fabrics, knitted fabrics, coated fabrics, fleece fabrics, socks, knitted fabrics, knitted fabrics, felt, nonwoven, deep fabric, yarn, cord plastic film, rubber, leather, paper, and many other materials. The test sample may be dry or immersed in water, oil, or other liquids.

The instrument is mainly composed of control system and friction system. The sample is installed on the clamp and is tightened. The upper fixture with the sandpaper is going down, adjust the position of the weight so that the sandpaper in contact with sample surface, through the control system set the number of friction times of the sample, and start the instrument. The lower fixture base does front-to-backmotion, so that the sample and sandpaper being rubbed against each other. When the number of times the movements reach the set value, the instrument stops and remove the sample to observe the degree of wear.

Suitable for testing all kinds of fabrics, including wear performance and wear resistance of clothing, shoes and industrial textiles.

Applications

The G282 Universal Abrasion Tester performs flat abrasion, curved abrasion, edge abrasion, folded edge abrasion, and resistance to frosting, pilling, and nap formation tests. Test specimens may be dry or immersed in water, oil, or other liquids. Suitable for woven fabrics, knitted fabrics, coated fabrics, pile fabrics, socks, felt, nonwovens, deep-pile fabrics, yarns, cords, plastic films, rubber, leather, paper, and various other materials. It is suitable for performance verification in new product development, quality control in production departments, third-party testing institutions, product performance verification laboratories, and quality and technical supervision departments for determining material properties.

Standards

ASTM D3885： Standard Test Method for Abrasion Resistance of Textiles - Curved-Surface Method (Bending and Abrasion Method)

ASTM D3886： Standard Test Method for Abrasion Resistance of Textiles - Pneumatic Diaphragm Method (Pneumatic Diaphragm Apparatus)

ASTM D3514： Test Method for Pilling Resistance and Other Surface Changes of Textiles (Elastic Pad Method)

AATCC 119 ：Color Change Due to Flat Abrasion (Sanding): Wire Mesh Method - Textile Resistance to Flat Abrasion Colorfastness (Frosting Effect)

AATCC 120 ：Color Change Due to Flat Abrasion (Sanding): Emery Cloth Method

FTMS 191 Method 5300 ：Test Method for General Abrasion Resistance of Textiles

FTMS 191 Method 5302 ：Test Method for General Abrasion Resistance of Textiles

Features

1. Fully automatic testing mode with automatic counting, automatic shutdown upon completion, and audible alert. Clamp-style specimen fixation enables rapid sample replacement to enhance testing efficiency.

2. Compact structural design facilitates mobility and adaptability, meeting diverse practical application requirements.

3. Accurately delivers material abrasion performance test results, supporting flat abrasion, curved abrasion, edge abrasion, folded edge abrasion, frosting, edge sealing, and napping resistance tests.

Parameters

Parameter	Specification
Test Mode	Automatic (ensures accurate, repeatable results; no operator evaluation required)
Gripping Device	Advanced design, maintains constant sample tension
Test Heads	Flat-grinding (inflatable membrane wear test method) + mill-grinding (includes required weight and initial abrasive)
Built-in Features	Timer and mechanical cycle counter
Table Configuration	Reciprocating table, with flat-grinding / mill-grinding test head mounted on top
Clamping Ring Inner Diameter	94 mm
Lock Ring Height	≤ 9.5 mm
Speed	120 ± 15/min
Moving Stroke	25 mm
Air Pressure	62 kPa (9 psi)
Dimensions (L × W × H)	330 × 500 × 460 mm
Weight	33 kg (72 lb)
Power Supply	120/230 V, 50/60 Hz, 2A / 1A

Accessoriess

Standard Configuration

Optional accessories

Test Procedures

1. First, prepare the accessories and test samples.

2. Using the sample wrench, disassemble the fixture. Place the drum membrane and sample into the fixture, tighten, and secure the fixture.

3. Secure the abrasive to the upper fixture and attach the weights.

4. Turn on the instrument, enter the operation interface, set the number of cycles, and adjust the air pressure value.

5. As air pressure increases, the sample expands to a certain height. Lower the upper fixture to bring the abrasive into contact with the test specimen.

6. Press the start button to initiate continuous friction between the abrasive and the test specimen.

7. When the sample wears through, the test automatically stops. Turn off the instrument to end the test.

8. Remove the test specimen for analysis and comparison to evaluate the material's surface wear resistance.

Другие товары поставщика

	Helmet Strap Tensile Tester	Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The helmet strap tensile testing machine is designed to simulate tensile, impact, ...
	Hexapod Tumbler test machine	Getaquote: Whats/App: +86 181 0160 0864 The Hexapod Tumbler test machine uses a steel ball with spikes or a hexagonal stand to randomly roll insi...
	Safety Helmet Anti-static Tester	Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Safety Helmet Anti-static Tester is designed to evaluate the antistatic perfor...
	Walk In Pharmaceutical Stability Chamber	Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Pharmaceutical Stability Testing Laboratory is a high-precision environmental ...
	Scratch Resistance Tester (GB 4943.1)	Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Scratch Resistance Tester (GB 4943.1) is designed for evaluating the scratch r...

Все товары поставщика

Похожие товары

	Mini Jewelry Laser Repair System – 60W to 400W Precision Welding	Продавец: Beijing JCZ Technology Co., Ltd	The Mini Jewelry Laser Welding Machineis an advanced mini laser welding system engineered for pre...
	Portable Backpack Laser Cleaning Machine – Lightweight, Efficient Rust & Paint Removal	Продавец: Beijing JCZ Technology Co., Ltd	TheHCP-M SeriesBackpack Laser Cleaning Machinefeatures a compact pulsed fiber laser system, desig...
	Suitcase Pulsed Laser Cleaning Machine | Ultra-Portable Handheld Fiber Laser Cleaner	Продавец: Beijing JCZ Technology Co., Ltd	The Suitcase Pulsed Laser Cleaning Machineis an ultra-portable, high-precision handheld fiber las...
	All-in-One Fiber Laser Marking and Engraving Machine – AIO A2 for Metal Glass Plastic	Продавец: Beijing JCZ Technology Co., Ltd	The EZCAD AIO-A2 is a compact,all-in-one fiber laser marking machineengineered for versatility an...
	Compact Intelligent Laser Marking Machine – Advanced Technology for High-Quality Marking	Продавец: Beijing JCZ Technology Co., Ltd	The ETF-M20/30 is a desktop fiber laser marking machinedesigned to provide exceptional marking ca...