Universal Abrasion Resistance Tester
Get a quote：
Whats/App: +86 181 0160 0864
The instrument can be used to flat grinding, mill grinding, edge grinding, folding grinding and anti-frost, edge-close and fleeceand other wear-resistant test, can be used for woven fabrics, knitted fabrics, coated fabrics, fleece fabrics, socks, knitted fabrics, knitted fabrics, felt, nonwoven, deep fabric, yarn, cord plastic film, rubber, leather, paper, and many other materials. The test sample may be dry or immersed in water, oil, or other liquids.
The instrument is mainly composed of control system and friction system. The sample is installed on the clamp and is tightened. The upper fixture with the sandpaper is going down, adjust the position of the weight so that the sandpaper in contact with sample surface, through the control system set the number of friction times of the sample, and start the instrument. The lower fixture base does front-to-backmotion, so that the sample and sandpaper being rubbed against each other. When the number of times the movements reach the set value, the instrument stops and remove the sample to observe the degree of wear.
Suitable for testing all kinds of fabrics, including wear performance and wear resistance of clothing, shoes and industrial textiles.
Applications
The G282 Universal Abrasion Tester performs flat abrasion, curved abrasion, edge abrasion, folded edge abrasion, and resistance to frosting, pilling, and nap formation tests. Test specimens may be dry or immersed in water, oil, or other liquids. Suitable for woven fabrics, knitted fabrics, coated fabrics, pile fabrics, socks, felt, nonwovens, deep-pile fabrics, yarns, cords, plastic films, rubber, leather, paper, and various other materials. It is suitable for performance verification in new product development, quality control in production departments, third-party testing institutions, product performance verification laboratories, and quality and technical supervision departments for determining material properties.
Standards
ASTM D3885： Standard Test Method for Abrasion Resistance of Textiles - Curved-Surface Method (Bending and Abrasion Method)
ASTM D3886： Standard Test Method for Abrasion Resistance of Textiles - Pneumatic Diaphragm Method (Pneumatic Diaphragm Apparatus)
ASTM D3514： Test Method for Pilling Resistance and Other Surface Changes of Textiles (Elastic Pad Method)
AATCC 119 ：Color Change Due to Flat Abrasion (Sanding): Wire Mesh Method - Textile Resistance to Flat Abrasion Colorfastness (Frosting Effect)
AATCC 120 ：Color Change Due to Flat Abrasion (Sanding): Emery Cloth Method
FTMS 191 Method 5300 ：Test Method for General Abrasion Resistance of Textiles
FTMS 191 Method 5302 ：Test Method for General Abrasion Resistance of Textiles
Features
1. Fully automatic testing mode with automatic counting, automatic shutdown upon completion, and audible alert. Clamp-style specimen fixation enables rapid sample replacement to enhance testing efficiency.
2. Compact structural design facilitates mobility and adaptability, meeting diverse practical application requirements.
3. Accurately delivers material abrasion performance test results, supporting flat abrasion, curved abrasion, edge abrasion, folded edge abrasion, frosting, edge sealing, and napping resistance tests.
Parameters
| Parameter | Specification |
|---|---|
| Test Mode | Automatic (ensures accurate, repeatable results; no operator evaluation required) |
| Gripping Device | Advanced design, maintains constant sample tension |
| Test Heads | Flat-grinding (inflatable membrane wear test method) + mill-grinding (includes required weight and initial abrasive) |
| Built-in Features | Timer and mechanical cycle counter |
| Table Configuration | Reciprocating table, with flat-grinding / mill-grinding test head mounted on top |
| Clamping Ring Inner Diameter | 94 mm |
| Lock Ring Height | ≤ 9.5 mm |
| Speed | 120 ± 15/min |
| Moving Stroke | 25 mm |
| Air Pressure | 62 kPa (9 psi) |
| Dimensions (L × W × H) | 330 × 500 × 460 mm |
| Weight | 33 kg (72 lb) |
| Power Supply | 120/230 V, 50/60 Hz, 2A / 1A |
Accessoriess
Standard Configuration
Optional accessories
Test Procedures
1. First, prepare the accessories and test samples.
2. Using the sample wrench, disassemble the fixture. Place the drum membrane and sample into the fixture, tighten, and secure the fixture.
3. Secure the abrasive to the upper fixture and attach the weights.
4. Turn on the instrument, enter the operation interface, set the number of cycles, and adjust the air pressure value.
5. As air pressure increases, the sample expands to a certain height. Lower the upper fixture to bring the abrasive into contact with the test specimen.
6. Press the start button to initiate continuous friction between the abrasive and the test specimen.
7. When the sample wears through, the test automatically stops. Turn off the instrument to end the test.
8. Remove the test specimen for analysis and comparison to evaluate the material's surface wear resistance.
Send product request
Other supplier products
 |
Safety Helmet Electrical Insulation Tester | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Safety Helmet Electrical Insulation Tester is designed to assess the electrica... |
 |
Spinal Internal Fixation System Component Testing Machine | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Spinal Internal Fixation System Component Testing Machine is a specialized mec... |
 |
Safety Helmet Anti-static Tester / Testing Equipment | Product Introduction: Safety hat anti-static performance tester according to the new national standard GB/T 2812-2006 "Safety hat test Method", GB... |
 |
Thermal - Cold Cycle Testing Machine / Hot and Cold Thermal Cycling Testers | Standard BS 7291: Compliant for thermal cycling tests on thermoplastic pipe systems (1769 Series with pressure chamber). Adaptive Certification: ... |
 |
Protective Clothing Thermal Conductivity Tester | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Protective Clothing Thermal Conductivity Tester is a specialized device used t... |
Same products
 |
Common Rail Injector Valve F00R J02 012 | Seller: 868983 | Common Rail Injector Valve F00R J02 012 David Chen |
 |
Common Rail Injector Valve F00R J02 005 | Seller: 868983 | Common Rail Injector Valve F00R J02 005 David Chen |
 |
Common Rail Injector Valve F00R J01 945 | Seller: 868983 | Common Rail Injector Valve F00R J01 945 David Chen |
 |
Common Rail Injector Valve F00R J01 941 | Seller: 868983 | Common Rail Injector Valve F00R J01 941 David Chen |
 |
Common Rail Injector Valve F00R J01 924 | Seller: 868983 | Common Rail Injector Valve F00R J01 924 David Chen |
