.

Wire Harness Vibration Abrasion Test Machine

Get a quote:

Whats/App: +86 156 1874 6768

Web: standard-groups.com

The Wire-to-Wire Vibration Abrasion Tester is designed to evaluate the abrasion resistance of automotive wires with cross-sectional areas below 6 mm² under controlled vibration conditions. The instrument tests the insulation surface of wires under repetitive contact, providing an accurate assessment of automotive wire durability and wear performance.

Standards

(1) VW60306:2000-11 – Automotive wire abrasion testing standard

(2) GS95007-1:2007-08 – Wire insulation wear test requirements

Parameters

ParameterSpecification
Vibration Frequency 10 Hz
Vibration Amplitude 6.35 ± 0.25 mm
Vibration Direction Horizontal
Fixed Wire Support Distance 280 mm
Movable Wire Support One point on fixed platform, other passes through guide >14× wire diameter
Distance Between Vibration and Fixed Table 45 mm
Friction Point Midpoint of sample (10% position)
Applied Mass 10 N, 12.5 N, 15 N, 20 N
Abrasion Count Setting 1–9999 cycles adjustable
Automatic Stop When wire insulation is breached and conduction occurs

Application

(1) Automotive wiring harness manufacturers – assess wire insulation abrasion resistance.

(2) Electrical component quality control – verify compliance with wire wear standards.

(3) Research and development – test new wire insulation materials.

(4) Automotive electronics testing labs – evaluate vibration-induced wear on wiring systems.

(5) Certification bodies – perform standardized abrasion testing of low-voltage wires.

Features

(1) Simulates real-world vibration conditions to evaluate wire-to-wire insulation wear.

(2) Adjustable load weights allow testing under different pressure conditions.

(3) Horizontal vibration table ensures uniform abrasion across the wire surface.

(4) Automatic shutdown prevents damage once insulation failure or short circuit occurs.

(5) Supports a wide range of cycle settings for long-term durability evaluation.


Отправить запрос, связаться с поставщиком

Кому: Standard International Group (HK) Limited
Ваш E-mail:
Текст письма:


Send to other suppliers

Другие товары поставщика

Sliding bearing PV friction testing machine
Sliding bearing PV friction testing machine Whats/App: +86 156 1874 6768 Web: standard-groups.com The testing machine can monitor the changes in friction force and the wear condition of the...
EN 50306 Railway Locomotive Cable Dynamic Cut-through Tester
EN 50306 Railway Locomotive Cable Dynamic Cut-through Tester Get a quote: Whats/App: +86 156 1874 6768 Web: standard-groups.com The Railway Locomotive Cable Dynamic Cut-through Tester is designed to evalua...
Aerosol Foams Flammability Tester,Automatic Reaction Calorimeter
Aerosol Foams Flammability Tester,Automatic Reaction Calorimeter Whats/App: +86 156 1874 6768 Web: standard-groups.com Product Introduction This product complies with "Recommendations on the Transport of Dange...
Adhesion Tester
Adhesion Tester Whats/App: +86 156 1874 6768 Web: standard-groups.com The adhesion tester is a device specifically used to detect the strength of the adhesion of...
Catheter Flow Meter
Catheter Flow Meter Whats/App: +86 156 1874 6768 Web: standard-groups.com The Catheter Flow Meter is specifically designed for measuring the water flow rate of medic...
Все товары поставщика

Похожие товары

PanEVAP & MVR system
PanEVAP & MVR system Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat...
PanGAP wide gap welded plate heat exchanger
PanGAP wide gap welded plate heat exchanger Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel...
PanBloc welded plate heat exchanger
PanBloc welded plate heat exchanger Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac...
PanBox welded plate heat exchanger
PanBox welded plate heat exchanger Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated...
PanPHE gasketed plate heat exchangers
PanPHE gasketed plate heat exchangers Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd PanPHE gasketed plate heat exchangersare designed with easy access for regular servicing and for ...