High precision 95th percentile male ATD for laboratory testing
Get a quote：
Whats/App: +86 156 1874 6768
Web: standard-groups.com
The 95th Percentile Male Crash Test Dummy is a biomechanical surrogate designed for frontal automotive crash testing, based on anthropometric data of large-stature adult males (95th percentile). It accurately simulates the mechanical response of high-body-mass, tall occupants during collisions. This dummy is essential for evaluating vehicle structures and restraint systems under extreme occupant conditions, supporting regulatory compliance, NCAP evaluation, and passive safety system development.
Standards
The dummy meets a wide range of international and national standards:
(1) GB 11551 – Protection of occupants in frontal collisions
(2) GB/T 29120 – Anthropomorphic test device general technical requirements
(3) GB/T 24550 – Frontal crash test methods
(4) UN R94 – Frontal crash occupant protection
(5) UN R137 – Full-width rigid barrier frontal collision
(6) FMVSS 208 – Occupant crash protection
(7) ISO 6487 – Road vehicles — Measurement techniques in impact tests
(8) SAE J211 – Instrumentation for impact tests
(9) Euro NCAP – Frontal crash test protocols
(10) C-NCAP – Frontal crash test protocols
(11) US NCAP / IIHS – Frontal crash test protocols
(12) J-NCAP / K-NCAP / ASEAN NCAP / Latin NCAP / ANCAP – Frontal crash test protocols
Parameters
Dimensions
| No. | Name | Dimension (mm) |
|---|---|---|
| A | Seated Height | 919.48 ±15.24 |
| B | Shoulder Pivot Height | 535.94 ±15.24 |
| C | H-Point Height (Reference) | 101.6 ±7.62 |
| D | H-Point to Seatback (Reference) | 154.94 ±5.08 |
| E | Shoulder Pivot to Backplane | 91.44 ±5.08 |
| F | Thigh Thickness | 167.64 ±7.62 |
| G | Elbow to Wrist | 309.88 ±7.62 |
| H | Head Rear to Backplane | 88.9 ±2.54 |
| I | Shoulder to Elbow | 363.22 ±10.16 |
| J | Elbow to Seat Plane | 213.36 ±10.16 |
| K | Knee Front to Backplane | 647.7 ±12.7 |
| L | Foot to Seat Plane | 469.9 ±12.7 |
| M | Knee Pivot to Floor | 533.4 ±12.7 |
| O | Chest Thickness (No Skin) | 246.38 ±7.62 |
| P | Foot Length | 264.16 ±7.62 |
| R | Hip to Knee Pivot | 579.12 ±12.7 |
| U | Hip Width | 403.86 ±10.16 |
| V | Shoulder Width | 474.98 ±10.16 |
| W | Foot Width | 99.06 ±7.62 |
| Y | Chest Circumference | 1135.38 ±20.32 |
| Z | Waist Circumference | 1008.38 ±20.32 |
| AA | Chest Reference Position | 482.6 ±5.08 |
| BB | Waist Reference Position | 203.2 ±5.08 |
Mass Distribution
| Component | Mass (kg) |
|---|---|
| Head Assembly | 4.94 ±0.05 |
| Neck Assembly | 1.68 ±0.05 |
| Upper Torso with Chest Skin | 22.27 ±0.36 |
| Lower Torso | 30.3 ±0.36 |
| Thigh (L/R) | 8.21 ±0.09 |
| Lower Leg (L/R, incl. feet) | 5.75 ±0.09 |
| Upper Arm (L/R) | 2.81 ±0.09 |
| Lower Arm/Hand (L/R) | 2.06 ±0.05 |
| Hands (L/R) | 0.57 ±0.05 |
| Feet (L/R) | 1.59 ±0.05 |
| Total Dummy Weight | 101.2 ±1.6 |
Sensor Configuration
| Location | Sensor Type | Channels | Requirement |
|---|---|---|---|
| Head | Accelerometer | 3x1 | ★★★ |
| Head | Angular Rate Sensor | 3x1 | ★ |
| Upper Neck | 6-axis Load Cell | 1x6 | ★★★ |
| Lower Neck | 6-axis Load Cell | 1x6 | ★ |
| Chest | Accelerometer | 3x1 | ★★ |
| Chest | Displacement Sensor | 1x1 | ★★★ |
| Thoracic Spine | 5-axis Load Cell | 1x5 | ★ |
| Lumbar | 6-axis Load Cell | 1x6 | ★ |
| Pelvis | Accelerometer | 3x1 | ★ |
| Lower Thigh | 6-axis Load Cell | 2x6 | ★★ |
| Lower Thigh | Single-axis Force Sensor | 2x1 | ★★★ |
| Knee | Displacement Sensor | 2x1 | ★★★ |
| Knee | 2-axis Force Sensor | 2x2 | ★ |
| Upper Tibia | 4-axis Force Sensor | 2x4 | ★★ |
| Lower Tibia | 4-axis Force Sensor | 2x4 | ★★ |
| Foot | Accelerometer | 2x2 | ★ |
Features
(1) Based on 95th percentile adult male anthropometric data, representing large-stature occupants
(2) Realistic replication of high-body-mass and tall occupants’ mass distribution and joint response
(3) Anatomically accurate modular structure for easy maintenance and replacement
(4) Supports multi-channel force, acceleration, and displacement sensors for regulatory and R&D testing
(5) Suitable for regulatory compliance, NCAP evaluation, and extreme-condition vehicle passive safety research
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Automotive Wire Hot Water（Salt Water）Resistance Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Automotive Wire Hot Water (Salt Water) Resistance Tester is engineered for long-term (o... |
 |
Thermal Radiation Flooring Combustion Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Product Standards ISO 9239 - 1: Reaction to fire tests for floor coverings - Part 1: Deter... |
 |
ISO 5658 Flame Spread Index Tester | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The Flame Spread Index Tester is designed to evaluate the flame propagation c... |
 |
ISO 25178 3D Optical Surface Profilometer Manufacturer China | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Large-Area 3D Optical Surface Profilometer is a high-performance three-dimens... |
 |
Standard Smoke & Heat Detector Test Tunnel | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The Smoke Fire Detector Threshold Test Chamber is a precision testing system ... |
Похожие товары
 |
ER4047 Aluminum Mig Welding Wire | Продавец: 868776 | Hangzhou Kunli Welding Materials Co., Ltd. specializes in manufacturing reliable welding material... |
 |
ER4043 Silicon Aluminum Welding Wire | Продавец: 868776 | Hangzhou Kunli Welding Materials Co., Ltd. specializes in manufacturing high-quality welding mate... |
 |
Choosing the Right Equipment for Heavy-Duty Cleaning | Продавец: Taizhou Feike Mechanical Technology Co., Ltd. | FEIKE’s High Pressure Washer is designed for industrial cleaning, equipment maintenance, ve... |
 |
ER4043 Silicon Aluminum Welding Wire | Продавец: 868776 | Hangzhou Kunli Welding Materials Co., Ltd. offers ER4043 Silicon Aluminum Welding Wire for alumin... |
 |
Высокоскоростная экструзионная линия для производства гофрированных труб с двойными стенками из ПЭВП с водяным охлаждением | Продавец: Shandong HUASU Plastic Technology Co.,Ltd. | Формы имеют структуру с двойным каналом потока и фильерную головку, обработанную азотированием и ... |
