Rotary Tribometer
Get a quote：
Whats/App: +86 181 0160 0864
Web: gellowen.co.uk
The Rotary Tribometer is a multifunctional friction and wear testing instrument designed for comprehensive tribological research. You use this system to study friction behavior, wear mechanisms, and lubrication performance under controlled rotational motion. By combining axial loading, precise load control, and an open test platform, the Rotary Tribometer allows you to simulate a wide range of real operating conditions, including dry friction, lubricated friction, high-speed rotation, and high-temperature environments. It provides accurate measurement of friction coefficient, wear behavior, temperature, vibration, and electrical contact resistance for material and lubricant evaluation.
Application
You can apply the Rotary Tribometer in laboratory research, quality evaluation, and component performance testing across multiple industries, including:
Lubricant anti-wear, extreme-pressure, and friction performance evaluation
(four-ball tests, thrust washer tests)
Material friction and wear research
(pin-on-disk, thrust pad, bearing materials, rolling contact fatigue)
Performance evaluation of hydraulic and lubrication system components
(pump vanes, slipper pads, seals)
Friction, wear, and lifetime analysis of bearings, gears, and rotating components
High-temperature dry friction and lubricated friction testing
(with test temperatures up to 600 °C using high-temperature fixtures)
Tribocorrosion and electrochemical wear studies
(lip seals and three-electrode systems)
Small-sample friction testing
(LVFA, Suzuki-type tests, miniature thrust pads)
Rolling contact fatigue and tilting bearing performance evaluation
Standards
You can conduct tests in accordance with widely recognized international and regional standards, including:
(1) GB/T 3140 series – Wear performance testing of lubricating oils and greases
(2) ASTM D2266 – Anti-wear properties of lubricating grease (four-ball method)
(3) ASTM D2783 – Extreme pressure properties of lubricating fluids
(4) ASTM D3702 – Thrust washer wear testing
(5) ASTM D4172 – Anti-wear properties of lubricating oils
(6) ASTM D5183 – Determination of friction coefficient of lubricants
(7) ASTM G99 – Pin-on-disk wear testing
(8) DIN 50324 – Determination of friction and wear of solid materials
(9) DIN 51350 (Parts 1–6) – Lubricant shear stability and wear testing
(10) ISO 11008 – Extreme pressure properties of lubricating greases (four-ball method)
(11) IP 239 / IP 300 – Lubricant extreme pressure and wear tests
(12) CEC L-45-T-93 – Shear stability of transmission fluids
Parameters
| Item | Standard Configuration | High-Speed Configuration | Upgraded Configuration |
|---|---|---|---|
| Speed Range | 30–3,000 rpm | 30–3,000 rpm / 100–10,000 rpm | Same as high-speed |
| Maximum Spindle Load | 10,000 N @ 3,000 rpm | 10,000 N @ 3,000 rpm / 4,000 N @ 10,000 rpm | Same as high-speed |
| Maximum Spindle Speed | 6,000 rpm | 10,000 rpm | 10,000 rpm |
| Torque Capacity | 14 Nm @ 30–1,500 rpm | 14 Nm @ 30–1,500 rpm / 7 Nm @ 3,000 rpm / 2.1 Nm @ 10,000 rpm | 25 Nm @ 30–1,500 rpm / 13 Nm @ 3,000 rpm / 4 Nm @ 10,000 rpm |
| Motor Power | 2.2 kW, single-phase | 2.2 kW, single-phase | 4 kW, three-phase |
| Temperature Capability | Up to 600 °C (with high-temperature fixture) | Up to 600 °C (with high-temperature fixture) | Up to 600 °C (with high-temperature fixture) |
| Load Range | 1–10,000 N (depending on actuator) | 1–10,000 N (depending on actuator) | 1–10,000 N (depending on actuator) |
| Control Parameters | Speed, load, temperature, test time | Speed, load, temperature, test time | Speed, load, temperature, test time |
| Recorded Parameters | Speed, friction torque, friction coefficient, contact resistance, temperature, sliding distance, cycle count | Same as standard | Same as standard |
| Data Interface | USB / software | USB / software | USB / software |
| Air Supply | ≥ 4 cfm @ 8 bar | ≥ 4 cfm @ 8 bar | ≥ 4 cfm @ 8 bar |
| Dimensions | 900 × 600 × 2,000 mm | 900 × 600 × 2,000 mm | 900 × 600 × 2,000 mm |
| Weight | 350 kg | 350 kg | 350 kg |
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Dual-Station Motorized Crocking Tester | Get a quote： Whats/App: +86 181 0160 0864 The Dual-Station Motorized Crocking Tester is designed to evaluate the color fastness of textiles and l... |
 |
Fuel Water Separator Test Bench | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Fuel Water Separator Test Bench primarily follows ISO/TS 16332-2006 "Diesel en... |
 |
Dry Fallen Wadding Tester | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The G275 dry fallen wadding tester evaluates shedding performance of medical nonwo... |
 |
Model Coin-cell Swelling System | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Model Coin-Cell Swelling System is designed for in-situ measurement of thickne... |
 |
Torque - to - Failure Tester for Metal Bone - connecting Screws | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk Torque-to-Failure Tester for Metal Bone-Connecting Screws is a specialized device ... |
Похожие товары
 |
Laser Cutting Machines | Продавец: Chanxan (Changshu) Laser Technology Co., Ltd. | Laser Cutting Machines PrecisionLaser Cutting Systemsfor Film, Glass & Industrial Materials ... |
 |
Precision Laser Micromachining Machine | Продавец: Chanxan (Changshu) Laser Technology Co., Ltd. | Precision Laser Micromachining Machine| Ultrafast Laser Micromachining Systems Chanxan provides ... |
 |
Ultrafast Laser Systems | Продавец: Chanxan (Changshu) Laser Technology Co., Ltd. | Ultrafast Laser Systems Femtosecond Laser System Ultra-precision femtosecond laser systemfor hi... |
 |
Industrial Laser Equipment Manufacturer | Продавец: Chanxan (Changshu) Laser Technology Co., Ltd. | Industrial Laser Equipment Manufacturer for Precision Cutting, Marking & Micromachining Chan... |
 |
Common Rail Injector Valve F00R J02 012 | Продавец: 868983 | Common Rail Injector Valve F00R J02 012 David Chen |
