ISO 13938-2 textile bursting strength testing machine supplier
Get a quote：
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Mullen Bursting Strength Tester
Standard
ASTM D3786.AS2001.2.4.BS EN ISO 13938-1.GB/T 7742.ISO 13938-1.JIS L1018/L1093.IWSTM170
Instrument features
1. the use of Mitsubishi 16-bit industrial-level MCU control, with strong anti-interference ability;
2. Equipped with Putian MT-300K printer, a test report can be printed with the output data.
Technical Parameters
Sensor Type: Pressure Transducer
Indicator Type: Digital Display
Operation Mode: Fully Automatic
Force Units: kPa, psi (lbs/in²), kgf/cm², with unit switching function
Burst Resistance Measurement Range: 250-5600 kPa
Clamp Ring Material: SUS#304 Stainless Steel
Clamp Ring Inner Diameter: Upper and Lower Clamp Rings φ31.5 ± 0.05 mm
Hydraulic Oil: 85% glycerin, 15% distilled water
Pressing Speed: High-Pressure Type 170 ± 10 ml/min
Accuracy: ±0.5%
Automatic Clamping and Release Device, Specimen Holding Force: >690 kPa
Dimensions: (L×W×H) 445 × 425 × 525 mm
Weight: 70 kg
Power: 120 W
Power Supply: 1∮AC220±10%, 50Hz
Standard Configuration: 1 rubber membrane, 1 wrench, 10 calibration sheets, 1 bottle of glycerin.
Optional: 1 air pump
G229B Bursting Strength Tester
Scope of application
Digital bursting strength testeris used for the detection of woven, knitted, non-woven fabrics, paper or board about the bursting strength and height.
Instrument features
A. Meet the maximum 100cm2 test area
B. Uniform clamping force, can be applied to all kinds of materials in all directions
C. Support online communication
D. Experimental area can be replaced, suitable for different standards
E. Store 50 custom standards
F. Test results such as: rich burst strength, bursting strength, diaphragm pressure, bursting height, and bursting time; make quality control personnel comprehensively understand the bursting performance of the sample.
G. Security shield automatic detection can automatically correct and exclude the film itself on the results
Instrument Configuration
1. One host
2. A set of the next clip ring (5)
3. Expanded broken film 1 package
4. Silent pump 1 set
5.Glycerine 1 bottle
6.Test rubber film (2 pieces)
7.Mute laboratory air compressor (optional)
Technical Parameters
A. Pressure: air pressure method
B. Measuring range: 0-1000kPa, accuracy: 0.2%
C. lower clip ring: 7.3cm2. 7.8cm2. 10cm2. 50cm2. 100cm2
D. Maximum expansion: 70 ± 0.02mm
E. Pressing rate: 1 ~ 100 kPa / min, speed adjustable
F. Output: print output, display output, real-time color graphics display
G. Power supply: Ac220V 50Hz 2000W
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Photovoltaic module backplane peeling strength testing machine | Whats/App: +86 156 1874 6768 Web: standard-groups.com Introduction: The Photovoltaic Module Backplane Peeling Strength Testing Machine is a spec... |
 |
Putty sanding tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard GB/T 1770 YC/T 315-2009 GB/T 1749-2025 Technical parameters The technical par... |
 |
Computer controlled memory impact testing machine，bench-top Computer controlled memory impact testing machine | Whats/App: +86 156 1874 6768 Web: standard-groups.com Computer controlled memory impact testing machine is mainly used for hard plastics, reinfor... |
 |
Shoe heat insulation testing machine -- sand bath | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard GB/T 20991: Determines thermal insulation of safety shoe soles under simulated ho... |
 |
Temperature Humidity Vibration Test Chamber Factory Direct | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards JJF 1101 Calibration Specification for Temperature and Humidity of... |
