Molten Metal Resistance & Impact Tester Industrial Equipment Factory
Get a quote：
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Features
Drop guide to collect the drops and to guide them towards the vertically oriented test specimen.
Senor for measuring the temperature linked to a recording device.
Holding frame and counterweights for the test specimen.
Motor speed can be adjust so that the steel rod is fed at the rate of (10 f 1) g/mm.
Needle valves adjust the O2 and acetylene flow rate.
LCD Screen display and control the motor speed.
Technical Parameters
| Size | 700mm (W) X 850mm (H) X 500mm (D) |
| Weight | 42kg |
| Installation requirements | 220V, 50HZ, 5A |
| Environmental Requirements | Temperature (20+2)degree C, Humidity (65+5)% |
| Gas requirements | oxygen, acetylene |
Test Procedures
(1) Secure the vertically oriented test specimen in the holding frame.
(2) Adjust the motor feed rate according to material thickness and standard requirements.
(3) Set the oxygen and acetylene flow rates using the needle valves.
(4) Start the test and allow molten metal droplets to impact the specimen.
(5) Monitor the temperature rise behind the specimen until a 40 K increase is reached; record the number of droplets required.
(6) Compile results for material evaluation and certification purposes.
Maintenance Information
Clean the drop guide and sensor surfaces after each test.
Inspect gas connections and needle valves for leaks or wear.
Verify motor feed rate calibration periodically.
Store in a dry environment to prevent corrosion.
Replace any worn or damaged parts immediately to ensure accuracy and safety.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Automotive Heel Abrasion Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The VW Heel Abrasion Tester is designed to evaluate the wear resistance of floor covering m... |
 |
Bubble Leak Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Bubble Leak Tester utilizes a positive pressure testing principle and is suitable for t... |
 |
Tracking indices of solid insulating materials Test Machine ,IEC60112 | Whats/App: +86 156 1874 6768 Web: standard-groups.com Introduction This tester is in accordance with IEC60112 standard . It is suitable for li... |
 |
Plastic Biodegradation Testing System，ISO 16929 Biodegradable Plastic Testing Instruments | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Plastic Biodegradation Testing System is a laboratory system used to evaluate the ultim... |
 |
Dry Sand Rubber Wheel Wear Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard ASTM G65 JBT_7705 Applicable standards Dry and wet abrasive wear testing machi... |
Похожие товары
 |
Высокоскоростная экструзионная линия для производства гофрированных труб с двойными стенками из ПЭВП с водяным охлаждением | Продавец: Shandong HUASU Plastic Technology Co.,Ltd. | Формы имеют структуру с двойным каналом потока и фильерную головку, обработанную азотированием и ... |
 |
PanEVAP & MVR system | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
