ISO Standard Vehicle Sealing Strip Wear Testing Machine | Factory Direct Supply for Automotive Industry
Get a quote：
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Feature
1. The friction head support is a straight up-and-down mounting bracket. The weights are directly mounted on the friction head support, and the required mass should be the total mass of the weights plus the friction head and the bracket. (Same as similar products from Germany)
2. The test sample is fixed on a flat plate with grooves, and the plate is secured at both ends with elbow clamps to hold and press the sample during testing.
Parameters
|
Test piece |
150-220mm. |
|
Friction medium |
Width: 20mm, thickness: 4mm, semi-fillet: 20 |
|
Weights |
750g |
|
Friction hammer load |
250g |
|
Speed |
0-100CPm/min. |
|
Counter |
0-999999. |
|
Size of the friction head |
20 20mm. |
|
Reciprocating stroke |
0-160mm. |
|
Power source |
AC220V,10A. |
|
Volume |
647427cm |
Accessoriess
Standard accessories:compatible with PV3313/PV3366 standards, made of wear-resistant rubber,flat pressing block + side clamps, suitable for seal strip samples,1 set each of 250g, 500g, for general load requirements,Abrasion head fixing screws,Operation manual & qualification certificate,Equipment leveling feet (4 pcs)Power cord (compatible with 220V power supply).
Optional accessories:Special fixtures for profiled seal strips (for curved strips like door/trunk seals),Custom abrasion heads (e.g., rubber heads of different hardness, metal heads, for special test standards),Extended weights (1000g, 3000g, for high-load testing),Data acquisition software (records friction cycles, abrasion loss, etc.),Spare abrasion heads (wear part, ensures continuous testing),Sample positioning ruler (improves sample installation accuracy).
Maintenance Information
1. Daily Maintenance
Wipe the fixture/sample table with a dry cloth after each test to remove dust/debris.
Check the tightness of abrasion head screws; re-tighten if loose.
2. Regular Maintenance (Every 3 Months)
Lubricate the vertical motion guide rail with light machine oil.
Calibrate the weight load accuracy with a precision scale.
3. Abrasion Head Replacement
Replace the abrasion head when its surface wear exceeds 1mm (to ensure test consistency).
4. Troubleshooting
If the friction speed is unstable: Check the drive motor’s connection and clean the transmission parts.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Keyboard Key Life Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com standards GB/T4967-95 silicone rubber and keypad life testing equivalent to JIS and IEC st... |
 |
Industrial washer nozzle fatigue test machine supplier | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The machine complies with international and national automotive testing standard... |
 |
Digital Pneumatic Stiffness Tester/Stiffness Tester Pneumatic | Whats/App: +86 156 1874 6768 Web: standard-groups.com A plunger of 25.4 mm (1 in) diameter pushes the fabric through a 38 mm (1.5 in) diameter ... |
 |
Circular Sample Cutter Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Circular Sample Cutter Tester is a manual precision instrument designed to cut standard... |
 |
Safety Helmets Against Molten Metal Splashing Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Safety Helmets Against Molten Metal Splashing Tester is designed to evaluate helmet per... |
