ISO Standard Vehicle Sealing Strip Wear Testing Machine | Factory Direct Supply for Automotive Industry
Get a quote：
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Feature
1. The friction head support is a straight up-and-down mounting bracket. The weights are directly mounted on the friction head support, and the required mass should be the total mass of the weights plus the friction head and the bracket. (Same as similar products from Germany)
2. The test sample is fixed on a flat plate with grooves, and the plate is secured at both ends with elbow clamps to hold and press the sample during testing.
Parameters
|
Test piece |
150-220mm. |
|
Friction medium |
Width: 20mm, thickness: 4mm, semi-fillet: 20 |
|
Weights |
750g |
|
Friction hammer load |
250g |
|
Speed |
0-100CPm/min. |
|
Counter |
0-999999. |
|
Size of the friction head |
20 20mm. |
|
Reciprocating stroke |
0-160mm. |
|
Power source |
AC220V,10A. |
|
Volume |
647427cm |
Accessoriess
Standard accessories:compatible with PV3313/PV3366 standards, made of wear-resistant rubber,flat pressing block + side clamps, suitable for seal strip samples,1 set each of 250g, 500g, for general load requirements,Abrasion head fixing screws,Operation manual & qualification certificate,Equipment leveling feet (4 pcs)Power cord (compatible with 220V power supply).
Optional accessories:Special fixtures for profiled seal strips (for curved strips like door/trunk seals),Custom abrasion heads (e.g., rubber heads of different hardness, metal heads, for special test standards),Extended weights (1000g, 3000g, for high-load testing),Data acquisition software (records friction cycles, abrasion loss, etc.),Spare abrasion heads (wear part, ensures continuous testing),Sample positioning ruler (improves sample installation accuracy).
Maintenance Information
1. Daily Maintenance
Wipe the fixture/sample table with a dry cloth after each test to remove dust/debris.
Check the tightness of abrasion head screws; re-tighten if loose.
2. Regular Maintenance (Every 3 Months)
Lubricate the vertical motion guide rail with light machine oil.
Calibrate the weight load accuracy with a precision scale.
3. Abrasion Head Replacement
Replace the abrasion head when its surface wear exceeds 1mm (to ensure test consistency).
4. Troubleshooting
If the friction speed is unstable: Check the drive motor’s connection and clean the transmission parts.
在线联系供应商
Other supplier products
 |
Flame Retardant Paper and Board Combustion Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The flame-retardant paper and cardboard combustion tester is suitable for testing the combu... |
 |
Walk In Salt Spray Test Chamber ISO 9227 Manufacturer | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards GMW 14872 Simulating the Corrosion Resistance of Automotive Compon... |
 |
Walk-in Constant Temperature and Humidity Test Chamber,Walk in Chamber Temperature Aging Room | Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications The Walk-in Constant Temperature and Humidity Test Chamber is suitable for co... |
 |
Bench UV Accelerated Aging Chamber | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application： Bench-top UV Light Accelerated Aging Test Chamber is suitable for accelerated... |
 |
ASTM D1204 Compliant Thermal Shrinkage Analyzer | Whats/App: +86 156 1874 6768 Web: standard-groups.com The dry heat shrinkage tester is a crucial instrument for testing the dimensional changes o... |
Same products
 |
MMA-120 Handheld Arc Welder | 卖方: 871183 | The MMA-120 Handheld Arc Welder from ChuangLi Electronic Technology Co., Ltd. is designed for con... |
 |
SHX Series Circulating Fluidized Bed Steam Boiler | 卖方: Hebei Genjux Boiler Co.,Ltd | Capacity: 10-35 t/hWorking pressure: 1.25-2.5 MPaOperating temperature: 194-400 ℃Applicable to bi... |
 |
YQ(Y)W Series Oil/Gas Fired Vertical Thermal Oil Boiler | 卖方: Hebei Genjux Boiler Co.,Ltd | Capacity: 7000-29200 KWOperating pressure: 0.8-1.0 MPaOperating temperature: 320℃Operating mode: ... |
 |
DHL Series Coal-Fired Steam Boilers | 卖方: Hebei Genjux Boiler Co.,Ltd | Capacity: 35-75 t/hOperating pressure: 1.25-5.4 MPaOperating temperature: 194-485℃Applicable to b... |
 |
SZL Series Biomass Steam Boiler | 卖方: Hebei Genjux Boiler Co.,Ltd | Capacity: 6-35 t/hWorking pressure: 1.0-2.5 MPaOperating temperature: 184-350 ℃Applicable fuel bi... |
