ISO 6722 Automotive Wire Flame Resistance Test Equipment Supplier Factory Direct
Get a quote：
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Features
(1) Dual testing modes: vertical and horizontal flame tests.
(2) Automatic ignition and precise flame exposure time.
(3) High-precision temperature measurement ensures accurate monitoring of flame conditions.
(4) Ventilation system safely removes combustion gases.
(5) Stainless steel enclosed chamber ensures safe operation and easy cleaning.
(6) Compliant with multiple international standards (QC/T, SAE, DIN, ISO).
Parameters
| Parameter | Specification |
|---|---|
| Test Chamber | Enclosed; dimensions: 650 × 450 × 900 mm; stainless steel with matte black background |
| Fuel Gas | High-purity propane or liquefied petroleum gas |
| Test Sample Length | 600 mm (24 in) |
| Sample Clamp Angle | 45° |
| Bunsen Burner Tube | Nominal diameter 9 mm; outer flame: 100 mm (4 in); inner flame: 50 mm (1/2 in); inner flame temperature: 900 ±50°C |
| Burner Position | Below the sample, perpendicular to sample axis |
| Ignition | Automatic |
| Vertical Flame Duration | 15 s |
| Temperature Measurement | High-precision K-type thermocouple with TES-1310 temperature meter |
| Exhaust System | Ventilation fan removes combustion gases after test |
| JIS3005 Horizontal Combustion Fixture | Included; horizontal combustion test setup |
| Horizontal Test Chamber | 305 × 355 × 610 mm |
| Horizontal Sample Length | 300 mm |
| Horizontal Sample Placement | Horizontal |
| Horizontal Flame Duration | 30 s |
| Horizontal Burner Tube Diameter | 10 mm; inner flame: 35 mm; outer flame: 130 mm |
| Stop Method | Automatic when preset data reached |
Accessories
(1) Bunsen burner with adjustable flame
(2) K-type thermocouple and TES-1310 temperature meter
(3) Horizontal combustion fixture (JIS3005)
(4) Sample clamps and holders
(5) Exhaust ventilation system
Test Procedures
(1) Mount the wire sample of specified length in the clamp at a 45° angle for vertical testing.
(2) Set the burner to the required flame parameters and activate automatic ignition.
(3) Expose the sample to the vertical flame for 15 s while monitoring temperature.
(4) For horizontal testing, mount the sample in the JIS3005 horizontal fixture.
(5) Apply the horizontal flame for 30 s.
(6) Observe and record the flame behavior, charring, and any combustion events.
(7) After completion, activate the exhaust system to remove residual gases.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Environmental Stress Cracking Resistance Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard ASTM D1693: Exclusively designed for bending beam and constant load tests on poly... |
 |
IEC 62196 EV Charging Gun Air Tightness Tester Manufacturer | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards (1) GB/T 20234.1-2023 – Connection set for conductive chargi... |
 |
Xenon Test Chamber | Whats/App: +86 156 1874 6768 Web: standard-groups.com Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full... |
 |
High-precision Material Thermal Conductivity Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Introduction It adopts the internationally popular method of heat flow meter to detect t... |
 |
Durability Tester for Left/Right Opening Refrigerated Display Cabinet Doors | Whats/App: +86 156 1874 6768 Web: standard-groups.com TheDurability Tester for Left/Right Opening Refrigerated Display Cabinet Doorsis designed f... |
