Automotive Wire Harness Swing Test Equipment Factory Direct
Get a quote：
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Parameters
| Parameter | Specification |
|---|---|
| Test Speed | 10–60 cycles/min (adjustable) |
| Bending Angle | 10°–180° adjustable (commonly 30°, 45°, 60°, 90°, 120°, 150°, 180°) |
| Test Stations | 6 simultaneous wire samples per test |
| Bending Cycles | 0–999.999 cycles adjustable |
| Applied Weights | 50 g, 100 g, 200 g, 300 g, 500 g (6 pieces) |
| Automatic Counter | 6 LCD counters, one per test station |
| Dimensions | 850 × 600 × 750 mm (L×W×H) |
| Weight | Approx. 100 kg |
| Power | 95 W |
| Power Supply | AC 220 V / 50 Hz |
Features
(1) Simulates real-world bending and swinging stress on wires.
(2) Adjustable bending angles and test speed to cover a wide range of wire applications.
(3) Multiple test stations enable simultaneous testing of up to six wire samples.
(4) Accurate cycle counting via integrated LCD counters.
(5) Supports a variety of weights to simulate different mechanical loads.
(6) Sturdy construction ensures consistent, repeatable test results.
Accessories
(1) Test station clamps for securing wires.
(2) Set of calibrated weights (50 g to 500 g).
(3) Power cable and fuse.
(4) Instruction manual.
(5) Optional data recording module for cycle tracking.
Test Procedures
(1) Secure wire samples on the six test stations using clamps.
(2) Set the desired bending angle and test speed.
(3) Attach appropriate weights to simulate mechanical load.
(4) Configure the number of bending cycles.
(5) Start the test; the instrument will swing and bend wires automatically.
(6) Monitor the cycle counters and test progress.
(7) Upon completion or wire failure, record the number of cycles and inspect wire condition.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Wire and cable smoke density tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The STD AOTSI-NBS smoke density test chamber, from NIST (NBS's predecessor), is widely used... |
 |
Rail Transit Car Wire Abrasion Testing Machine | Railway Cable Wear Resistance Tester Manufacturer | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Features (1) Abrasion Monitoring – The machine automatically stops whe... |
 |
Aluminum Ointment Tube Toughness Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The ductility tester for aluminum tubes is a device specifically used to detect the ductili... |
 |
16-Segment Heated Thermal Manikin (Dry Type) | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The 16-Segment Heated Thermal Manikin is used in the following application are... |
 |
Rock Wool Thermal Load Test Device Manufacturer | EN 13162 & ASTM C411 Insulation Material Testing Equipment | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com E-mail：info@standard-groups。com Parameters ItemDescription Contr... |
Похожие товары
 |
Высокоскоростная экструзионная линия для производства гофрированных труб с двойными стенками из ПЭВП с водяным охлаждением | Продавец: Shandong HUASU Plastic Technology Co.,Ltd. | Формы имеют структуру с двойным каналом потока и фильерную головку, обработанную азотированием и ... |
 |
PanEVAP & MVR system | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
