.

ISO 5660 Cone Calorimeter Fire Test Equipment Supplier Factory Direct

Get a quote:

Whats/App: +86 156 1874 6768

Web: standard-groups.com

Features

Ignition System

10 kV spark igniter with fire-off safety system; position automatically detected via mechanical linkage.

Fully automated ignition, timing, gas control, and flame-off functions.

Exhaust System

Stainless-steel design including hood, pipes, diffusion plate, orifice flow meter, and axial-flow fan.

Long-life stainless-steel smoke collection cover, sampling needle, and exhaust fan.

Gas Sampling System

Ring sampler with 12 evenly distributed pores opposite airflow direction.

Three-stage 0.5 μm precision filtration with particle filter, CO₂ filter, and water trap.

Refrigerated cold trap with 0–5 °C temperature control.

Dust filter installed 685 mm from smoke-collecting hood.

Measuring System

Paramagnetic O₂ analyzer (0–25%), Servomex sensor with linear response.

Laser system for smoke-density measurement.

High-precision load cell for dynamic mass-loss monitoring.

PID temperature control with three thermocouples for cone-heater measurement.

User Operating System

LabVIEW-based professional control platform; intuitive and user-friendly.

PID temperature controller integrated with programmable control module.

PLC-based acquisition and airflow regulation; automatic sample ID management and database recordkeeping.

Technical Parameters

ItemValue
Power supply 208–230 V, 50/60 Hz, 50 A, single phase
Cone heater 5000 W Inconel heater, 0–120 kW/m²
Sample size 100 mm × 100 mm × ≤50 mm
Ignition 10 kV automatic spark igniter
Temperature control PID, 3× K-type thermocouples
Exhaust system Stainless-steel hood, duct, orifice meter, axial fan
Gas sampling 12-pore ring sampler, 0.5 µm triple filtration, 0–5 °C cold trap
Gas analyzers O₂ paramagnetic (0–25%); CO₂ NDIR (0–10%); CO NDIR (0–1%)
Smoke measurement He-Ne laser photometric system
Load measurement Sartorius load cell, 0.01 g resolution
Data acquisition 16-bit A/D, 4 scans/sec
Control system LabVIEW + PLC, touchscreen control
Data output Excel reports, customizable formats
System configuration 19" rack modules; customizable full-system layout

Accessories

• 10 kV electronic igniter

• Stainless-steel exhaust hood and ducting

• Orifice plate flow-measurement module

• Laser smoke-density measurement system

• Paramagnetic oxygen analyzer

• CO and CO₂ NDIR analyzers

• Load-cell weighing module

• Cold trap (0–5 °C)

• Gas-sampling ring with 12 sampling ports

• LabVIEW control software and PLC system

• Sample holder and retainer frame

• Data-acquisition platform and reporting package

Test Procedures

Place the specimen in the sample holder and input test parameters via the touchscreen control system.

The system automatically performs ignition, heat-flux adjustment, and timing.

Real-time measurement of HRR, oxygen consumption, smoke density, mass loss, CO/CO₂ concentration, and temperature.

Data acquisition system stores all curves and numerical results in the integrated database.

Export test report through automated Excel reporting functions.

After testing, allow system purge and remove combusted residue.


Отправить запрос, связаться с поставщиком

Кому: Standard International Group (HK) Limited
Ваш E-mail:
Текст письма:


Send to other suppliers

Другие товары поставщика

High-Low Temperature Humidity Test Chamber
High-Low Temperature Humidity Test Chamber Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications High and Low Temperature Humidity Test Chamber is designed for performance an...
Helmet Xenon Aging Tester
Helmet Xenon Aging Tester Whats/App: +86 156 1874 6768 Web: standard-groups.com The helmet xenon lamp aging tester is a device that simulates the damage caused by long-ter...
Safety Helmet Lateral Rigidity Tester
Safety Helmet Lateral Rigidity Tester Whats/App: +86 156 1874 6768 Web: standard-groups.com The Safety Helmet Lateral Rigidity Tester is a precision instrument designed to evaluate th...
Automatic Textile Fiber Blend Ratio Testing System ISO Certified
Automatic Textile Fiber Blend Ratio Testing System ISO Certified Get a quote: Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards (1) GB/T 14342-1993: Synthetic short fiber specific resistance tes...
High Precision Filter Element Test Machine
High Precision Filter Element Test Machine Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards This system meets the requirements of: (1) GB/T 14295-2019 – Air filters....
Все товары поставщика

Похожие товары

MMA-120 Handheld Arc Welder
MMA-120 Handheld Arc Welder Продавец: 871183 The MMA-120 Handheld Arc Welder from ChuangLi Electronic Technology Co., Ltd. is designed for con...
SHX Series Circulating Fluidized Bed Steam Boiler
SHX Series Circulating Fluidized Bed Steam Boiler Продавец: Hebei Genjux Boiler Co.,Ltd Capacity: 10-35 t/hWorking pressure: 1.25-2.5 MPaOperating temperature: 194-400 ℃Applicable to bi...
YQ(Y)W Series Oil/Gas Fired Vertical Thermal Oil Boiler
YQ(Y)W Series Oil/Gas Fired Vertical Thermal Oil Boiler Продавец: Hebei Genjux Boiler Co.,Ltd Capacity: 7000-29200 KWOperating pressure: 0.8-1.0 MPaOperating temperature: 320℃Operating mode: ...
DHL Series Coal-Fired Steam Boilers
DHL Series Coal-Fired Steam Boilers Продавец: Hebei Genjux Boiler Co.,Ltd Capacity: 35-75 t/hOperating pressure: 1.25-5.4 MPaOperating temperature: 194-485℃Applicable to b...
SZL Series Biomass Steam Boiler
SZL Series Biomass Steam Boiler Продавец: Hebei Genjux Boiler Co.,Ltd Capacity: 6-35 t/hWorking pressure: 1.0-2.5 MPaOperating temperature: 184-350 ℃Applicable fuel bi...