Fire Retardant Wood Combustion Tester, ASTM E84 Wood Flame Spread Tester Manufacturer
Get a quote：
Whats/App: +86 156 1874 6768
Web: standard-groups.com
E-mail：info@standard-groups。com
Parameters
| Description | Details |
|---|---|
| Ambient temperature | Room temperature～35℃ |
| Ambient humidity | ≤70% |
| Operating voltage | AC220 V ± 10V |
| Gas source | Natural gas, liquefied petroleum gas (customer-provided) |
| Timing accuracy | 3 min ± 0.1 s |
| Real-time temperature display | Available |
| Equipment dimensions (L×W×H) | 0.65×0.35×0.8 m |
| Equipment weight | 25 Kg |
Working conditions
1. Ambient temperature: room temperature —— 35oC
2. Ambient humidity: ≤70%
3. working voltage: AC 220±10V
4. gas source: natural gas, liquefied petroleum gas
5. timing accuracy: 3min±GA/T 42.1 Flame retardant wood burning performance test method wood stack method 0.1s
6. temperature error: 310oC≤±10oC
Specimen Preparation
1. The specimen size is 76mm×13mm×13mm, the cutting error is ±1mm, and the surface is required to be smooth and flat. Three sets of 24 pieces were prepared for each test piece.
2. The specimen is cut 0.6mm away from the longitudinal end of the wood, less than 1m long wood, and cut from the middle to both sides.
3. the specimen cut from the upper and lower sides of the width of the wood along the thickness direction parallel cut 13mm×13mm test piece two layers, and then cut 76mm along the length direction of the test piece, the remaining center part is not sampled.
4. before the test, the specimen must be at a temperature of 23±2oC, relative humidity (50±5) % of the condition, so that its quality is constant. The determination condition is the interval of 24h, the mass change of two weighing before and after each group is not more than 1%.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Computer-controlled Explosion-proof Capillary Rheometer | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Computer-controlled Explosion-proof Capillary Rheometer is a laboratory rheological tes... |
 |
Mobile Phone Air Tightness Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Mobile Phone Air Tightness Tester is designed to evaluate the sealing performance of sm... |
 |
Ring-on-Block Friction and Wear Test Equipment Model 2M | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards GB/T 3960-2016 Plastics – Determination of Sliding Wear Properties GB/T 3... |
 |
SAE J1128 Automotive Cable Penetration Tester | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The Automotive Wire Puncture Tester is designed to evaluate the insulation st... |
 |
Engine blow-by test equipment manufacturer | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Test system for the characterisation of the oil content in blow-by gases at e... |
Похожие товары
 |
Высокоскоростная экструзионная линия для производства гофрированных труб с двойными стенками из ПЭВП с водяным охлаждением | Продавец: Shandong HUASU Plastic Technology Co.,Ltd. | Формы имеют структуру с двойным каналом потока и фильерную головку, обработанную азотированием и ... |
 |
PanEVAP & MVR system | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
