ASTM E662 Fire Smoke Analysis Equipment Manufacturer
Get a quote：
Whats/App: +86 156 1874 6768
Web: standard-groups.com
E-mail：info@standard-groups。com
Parameters
| Item | Specification |
|---|---|
| Tube furnace heating length | 600 mm |
| Temperature range | 0–1100 °C |
| Temperature accuracy | ±0.1 °C |
| Quartz tube | Heat-resistant quartz, thickness ≥ 2 mm |
| SO₂ measurement range | 0–1000 ppm |
| SO₂ resolution | 1 ppm |
| SO₂ accuracy | ±30 ppm |
| NOₓ measurement range | 0–3000 ppm |
| NOₓ resolution | 1 ppm |
| NOₓ accuracy | ±30 ppm |
| Gas sampling bag | PTFE-coated, 80 L capacity, with imported manual sampler |
| CO measurement range | 0–10 % |
| CO resolution | 0.01 % |
| CO accuracy | Absolute ±0.1 % or relative ±3 % |
| CO₂ measurement range | 0–20 % |
| CO₂ resolution | 0.01 % |
| CO₂ accuracy | Absolute ±0.2 % or relative ±3 % |
| Spectral analysis device | Spectrometer at 500 nm wavelength, membrane thickness 10 mm |
| Absorption solution | 0.1 N NaOH |
| Titration reagents | Picric acid aqueous solution (3 g/dm³) and sodium carbonate aqueous solution (50 g/dm³) |
Features
Sealed chamber design with the smoke generation system installed internally, providing stable operation and effective protection of core components
Large observation window allowing clear visual monitoring of test status and specimen movement
Integrated industrial design with panel-mounted structure, offering intuitive operation and ergonomic user interface
Tube furnace protected by perforated outer housing to enhance heat dissipation and ensure uniform temperature rise to the target value
High-temperature K-type thermocouple for accurate measurement of specimen zone temperature
Ceramic combustion boat driven by strong magnetic coupling and transmission mechanism for stable and repeatable specimen delivery into the furnace core
Precision lead-screw transmission system enabling accurate positioning and reliable sealing of the quartz tube, reducing the risk of damage due to manual operation
Dual filtration columns filled with activated carbon and color-changing silica gel for effective carrier gas purification and drying
Branded computer with dedicated control software for automatic test process control
Software-based temperature regulation and stabilization with real-time curve recording, automatic data display, storage, and report generation
Test Procedures
1. Pre-Test Preparation
Ensure the tester is installed in a well-ventilated laboratory environment. Verify that the tube furnace, quartz tube, and filtration system are clean and properly assembled. Check that the absorption solution (0.1 N NaOH) and titration reagents are prepared according to specified concentrations. Confirm normal operation of the temperature control system, gas analysis instruments, and data acquisition software.
2. Specimen Loading
Place the prepared test specimen into the ceramic combustion boat. Using the magnetic drive and transmission mechanism, steadily convey the boat into the center of the tube furnace. The lead-screw positioning system ensures accurate alignment and reliable sealing at the quartz tube interface, minimizing gas leakage during the test.
3. Heating and Smoke Generation
Set the target temperature according to the selected standard. The furnace temperature is automatically controlled by the software, with uniform heating achieved through regulated power output. As the specimen undergoes thermal decomposition or combustion, the generated smoke is carried by a controlled gas flow toward the sampling and absorption system.
4. Gas Collection and Analysis
The combustion gases are either introduced into the NaOH absorption solution via bubbling or collected in PTFE-coated gas sampling bags for subsequent analysis. Online infrared gas analyzers continuously measure CO and CO₂ concentrations, while SO₂ and NOₓ are determined using dedicated measurement channels or chemical analysis methods. All test data are automatically recorded and stored by the control software.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Industrial Endoscope Lens Air Tightness Tester Manufacturer China | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards (1) IEC 60529 (IP protection classification) (2) ISO 20653 (Road ... |
 |
OEM Suture Diameter Tester for Medical Industry | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The Medical Suture Thread Diameter Tester is a specialized testing equipment ... |
 |
The Pin-on-Disc Friction and Wear Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Pin-on-Disc Friction and Wear Tester is designed for evaluating the friction and wear p... |
 |
Aerosol Sensor Test System，Aerosol and Dust Monitors Test System | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Aerosol Sensor Test System is designed for development, testing, and calibration of act... |
 |
Sanitary Napkin Absorption Speed Test chamber | Whats/App: +86 156 1874 6768 Web: standard-groups.com Main uses: The absorption speed tester is used to measure the absorption speed of sanitary... |
