Automatic Filter Performance Tester G506 Manufacturer | Multi-standard Filtration Efficiency Test System

Get a quote：

Whats/App: +86 156 1874 6768

Web: standard-groups.com

E-mail：info@standard-groups。com

Parameters

Items	Parameter
Apllication	Load and quality control
Max Efficiency	99.999%
Aerosol Type	DOP/PAO/DEHS/Paraffi/Others Oil Aerosol、Salt
Aerosol Generation	Atomizing
CMD	0.2μm（Oil）or 0.75um(NaCl)
GSD	＜1.6（Oil）or <1.86(NaCl)
Flow Rate	15-100L/min
Resistance	0-150mm H2O(0-1470Pa)
Particle Detect	Scatter Photometer
Measurement Time	10 Sec.
Data Report	LCD，RS-232
Operation	Independent tewster、automatic production line
Standard compliant	US 42 CFR part 84.EN 143.JMOL，ISO 23328-1 ISO 16900-3
Power Supply	115VAC、60Hz，10A或230VAC，50Hz，5A
Compressor Air	80psig，7scfm（550kPa，198std.L/min）
Dimension	70cm x 70cm x 147cm（28in, x 28in.x 58in.）

Accessoriess

Main Unit: As the core component of the testing instrument, it is responsible for overall control and data processing.

Aerosol Generator: Includes salt particulate aerosol generators and oil particulate aerosol generators, used to generate the aerosol particles required for the test.

Classifier: Utilizes the principle of inertia to collect unwanted large particles into a collection bottle, ensuring that the aerosol particles entering the testing system meet the requirements.

Particle Counter: Usually equipped with two units, used to measure the number or mass concentration of aerosols upstream and downstream of the filter media, and is a key device for calculating filtration efficiency. Some systems may use a laser scattering photometer instead of a particle counter.

Static Neutralization Device: Neutralizes the static electricity carried by the aerosols, reducing particle loss and the influence of static electricity on the test results.

Differential Pressure Sensor: Monitors the pressure drop across the filter media, assessing changes in resistance during the filtration process.

Flow Meter: Monitors the flow rate during the test, ensuring consistency of test conditions. Flow meters are typically 2.5 grade accurate, ranging from 10-100 L/min.

Vacuum pump: Provides the necessary negative pressure environment to ensure aerosol particles can smoothly enter the testing system.

Pneumatic clamps and protective devices: Employ pneumatic clamping, offering convenient operation and high safety, while also featuring protective devices to ensure safe use.

Programmable logic controller (PLC) and touchscreen: Enables automated control of the testing process, including control, monitoring, calculation, and data display functions. Some devices utilize a PLC control system and are equipped with a 7-inch color touchscreen.

Instruction manual and power cord: Provides an operation guide and power connection instructions to ensure users can correctly operate the equipment.

Test Procedures

Operating Procedures:

First: Prepare the accessories and test sample;

Turn on the instrument and enter the LCD screen operating interface;

Perform a no-load test first;

Press the dual-control pneumatic keys on both sides to lower the clamp;

Set the airflow rate and aerosol particle parameters;

After the data stabilizes, proceed to the next step;

Obtain the amount of aerosol upstream of the filter media;

Once the data stabilizes, a "Place Clamp" dialog box will pop up on the screen;

Place the prepared sample into the instrument clamp and clamp it securely;

Start the test;

Wait a few seconds to obtain the amount of aerosol downstream of the filter media and calculate the filtration efficiency;

The instrument will automatically print out the test report;

Remove the sample;

After the test, turn off the instrument and evaluate the filtration performance of the material based on the test data results.

Другие товары поставщика

	Closed - Space Tester for Aerosol Sprays	Whats/App: +86 156 1874 6768 Web: standard-groups.com Product Description Conforms to UN Recommendations on the Transportation of Dangerous Good...
	ISO 12236 compliant geotextile impact resistance equipment	Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Application It is used to test the penetration ability of various geomateria...
	3KW 150l Xenon Lamp Aging Test Chamber Air Cooled	Whats/App: +86 156 1874 6768 Web: standard-groups.com Detailed Product Description standard: Xenon Weathering Test Chamber Xenon Lamp: 3K...
	Computer-controlled Helmet Impact Tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com Application Scope This testing instrument is applicable to the impact - energy absorption ...
	Automatic voltage internal resistance tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard ASTM E83: Standard Test Method for Verification of Linear Displacement Measuring ...

Все товары поставщика

Похожие товары

	Высокоскоростная экструзионная линия для производства гофрированных труб с двойными стенками из ПЭВП с водяным охлаждением	Продавец: Shandong HUASU Plastic Technology Co.,Ltd.	Формы имеют структуру с двойным каналом потока и фильерную головку, обработанную азотированием и ...
	PanEVAP & MVR system	Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat...
	PanGAP wide gap welded plate heat exchanger	Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel...
	PanBloc welded plate heat exchanger	Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac...
	PanBox welded plate heat exchanger	Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated...