Spinal Internal Fixation System Assembly Testing Machine
Get a quote：
Whats/App: +86 181 0160 0864
Web: gellowen.co.uk
The Spinal Internal Fixation System Assembly Testing Machine is a specialized device used to evaluate the mechanical performance of spinal fixation assemblies, including screws, rods, plates, and connectors. It simulates physiological loads such as compression, tension, bending, and torsion to assess the strength, fatigue resistance, and durability of spinal implant systems under realistic conditions.
Standards
(1)YY/T 0961
(2)ASTM F1798
These standards specify test methods for evaluating the uniaxial static and fatigue strength of spinal internal fixation systems, as well as the resistance to loosening of assembly connection devices. The purpose is to provide a mechanical performance evaluation method for spinal implant connection devices of different designs.
Application
The Spinal Internal Fixation System Assembly Testing Machine is designed to evaluate the mechanical performance, stability, and assembly integrity of spinal implants. Typical applications include:
Orthopedic implant testing: Assess the strength, stiffness, and fixation stability of assembled pedicle screws, rods, plates, and cages.
Quality control: Ensure consistent performance and proper assembly of spinal fixation devices during manufacturing.
Research and development: Optimize implant design, materials, and connection mechanisms for improved biomechanical performance.
Standards compliance: Conduct tests in accordance with ISO 12189. ASTM F1717. and other relevant international guidelines to verify assembly reliability.
This machine ensures spinal fixation systems meet mechanical and structural requirements for safe clinical use.
Specifications
| Parameter | Specification |
|---|---|
| Maximum Load Peak | 4400 N |
| Dynamic Load Peak | 3000 N |
| Static Load Peak | 2100 N |
| Testing Machine Accuracy Class | 0.5 |
| Load Measurement Range | 0.4% – 100% F.S. |
| Load Measurement Accuracy | Better than ±0.2% of indicated value (within the load measurement range) |
| Maximum Fatigue Loading Frequency | 100 Hz |
| Axial Stroke | 30 mm |
| Displacement Resolution | 0.1 μm |
| Test Space (upper-lower fixture spacing) | 0 – 950 mm |
| Net Weight | Approx. 900 kg |
| Dimensions | Approx. 1000 × 700 × 1800 mm |
| Optional Environmental Accessories | Water bath environment, high-temperature environment, low-temperature environment, humidity control environment, etc. |
| Applicable Scenarios | Fatigue, fracture, and static testing of metals, polymers, composites, and other materials; Static and dynamic testing of surgical implants (e.g., trauma, joint, spinal, dental applications); Tensile fatigue testing of polymer materials; Crack propagation testing of rubber materials |
| Optional Fixtures | Mechanical tensile fixtures, compression fixtures, bending fixtures; Femoral stem-specific fixtures, four-point bending fixtures; Spinal rod/screw-specific fixtures, tibial plateau-specific fixtures; Vertebral resection model system compression/tension fixtures; Dental implant fixtures, and other specialized testing fixtures |
Accessories
(1)Specimen Fixtures: Securely hold pedicle screws, rods, plates, and other implant components.
(2)Load Frame/Actuator: Applies controlled axial, torsional, or bending loads to the assembly.
(3)Data Acquisition System: Records forces, displacements, and deformation during testing.
(4)Calibration Tools: Ensure accuracy of sensors and measurement devices.
Test Procedures
Specimen Preparation: Assemble spinal fixation devices according to manufacturer or standard specifications.
Machine Setup: Mount the assembly, connect sensors, and configure test parameters.
Load Application: Apply axial, bending, or torsional loads per defined standards until failure or target cycles.
Data Recording: Continuously monitor and log forces, displacement, and assembly response.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Aluminum Ointment Tube Toughness Tester | The ductility tester for aluminum tubes is a device specifically used to detect the ductility indicators of packaging materials such as aluminum so... |
 |
Solid Energetic Materials Stability Tester | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Solid Energetic Materials Stability Tester monitors the changes in gas pressur... |
 |
Rapid screening Calorimeter | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The rapid - screening calorimeter is a professional calorimetric instrument for th... |
 |
Shoe Bending Angle Tester | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Shoe Bending Angle Tester is designed to evaluate the rigidity and flexibility... |
 |
Martindale Abrasion Tester for Fabric & Textile Durability | Get a quote： Whats/App: +86 181 0160 0864 The Martindale Abrasion Tester is a precision instrument designed to evaluate the abrasion and pilling ... |
Похожие товары
 |
Высокоскоростная экструзионная линия для производства гофрированных труб с двойными стенками из ПЭВП с водяным охлаждением | Продавец: Shandong HUASU Plastic Technology Co.,Ltd. | Формы имеют структуру с двойным каналом потока и фильерную головку, обработанную азотированием и ... |
 |
PanEVAP & MVR system | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
