Spinal Internal Fixation System Assembly Testing Machine
Get a quote：
Whats/App: +86 181 0160 0864
Web: gellowen.co.uk
The Spinal Internal Fixation System Assembly Testing Machine is a specialized device used to evaluate the mechanical performance of spinal fixation assemblies, including screws, rods, plates, and connectors. It simulates physiological loads such as compression, tension, bending, and torsion to assess the strength, fatigue resistance, and durability of spinal implant systems under realistic conditions.
Standards
(1)YY/T 0961
(2)ASTM F1798
These standards specify test methods for evaluating the uniaxial static and fatigue strength of spinal internal fixation systems, as well as the resistance to loosening of assembly connection devices. The purpose is to provide a mechanical performance evaluation method for spinal implant connection devices of different designs.
Application
The Spinal Internal Fixation System Assembly Testing Machine is designed to evaluate the mechanical performance, stability, and assembly integrity of spinal implants. Typical applications include:
Orthopedic implant testing: Assess the strength, stiffness, and fixation stability of assembled pedicle screws, rods, plates, and cages.
Quality control: Ensure consistent performance and proper assembly of spinal fixation devices during manufacturing.
Research and development: Optimize implant design, materials, and connection mechanisms for improved biomechanical performance.
Standards compliance: Conduct tests in accordance with ISO 12189. ASTM F1717. and other relevant international guidelines to verify assembly reliability.
This machine ensures spinal fixation systems meet mechanical and structural requirements for safe clinical use.
Specifications
| Parameter | Specification |
|---|---|
| Maximum Load Peak | 4400 N |
| Dynamic Load Peak | 3000 N |
| Static Load Peak | 2100 N |
| Testing Machine Accuracy Class | 0.5 |
| Load Measurement Range | 0.4% – 100% F.S. |
| Load Measurement Accuracy | Better than ±0.2% of indicated value (within the load measurement range) |
| Maximum Fatigue Loading Frequency | 100 Hz |
| Axial Stroke | 30 mm |
| Displacement Resolution | 0.1 μm |
| Test Space (upper-lower fixture spacing) | 0 – 950 mm |
| Net Weight | Approx. 900 kg |
| Dimensions | Approx. 1000 × 700 × 1800 mm |
| Optional Environmental Accessories | Water bath environment, high-temperature environment, low-temperature environment, humidity control environment, etc. |
| Applicable Scenarios | Fatigue, fracture, and static testing of metals, polymers, composites, and other materials; Static and dynamic testing of surgical implants (e.g., trauma, joint, spinal, dental applications); Tensile fatigue testing of polymer materials; Crack propagation testing of rubber materials |
| Optional Fixtures | Mechanical tensile fixtures, compression fixtures, bending fixtures; Femoral stem-specific fixtures, four-point bending fixtures; Spinal rod/screw-specific fixtures, tibial plateau-specific fixtures; Vertebral resection model system compression/tension fixtures; Dental implant fixtures, and other specialized testing fixtures |
Accessories
(1)Specimen Fixtures: Securely hold pedicle screws, rods, plates, and other implant components.
(2)Load Frame/Actuator: Applies controlled axial, torsional, or bending loads to the assembly.
(3)Data Acquisition System: Records forces, displacements, and deformation during testing.
(4)Calibration Tools: Ensure accuracy of sensors and measurement devices.
Test Procedures
Specimen Preparation: Assemble spinal fixation devices according to manufacturer or standard specifications.
Machine Setup: Mount the assembly, connect sensors, and configure test parameters.
Load Application: Apply axial, bending, or torsional loads per defined standards until failure or target cycles.
Data Recording: Continuously monitor and log forces, displacement, and assembly response.
Send product request
Other supplier products
 |
Cargo Compartment Liner Burn-Through Fuel Test System | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Cargo Compartment Liner Burn-Through Fuel Test System is a specialized aviatio... |
 |
Helmet Xenon Aging Tester | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The helmet xenon lamp aging tester is a device that simulates the damage caused by... |
 |
Roof-Mounted Photovoltaic Module Fire Test Apparatus | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Roof-Mounted Photovoltaic Module Fire Test Apparatus is a specialized testing ... |
 |
Microbial Barrier Tester | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk Y/T 0471.5-2017 is a newly updated standard, which specifies the experimental meth... |
 |
Leakage Test System | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk Test System for testing tightness and leackage for a high diversity of components ... |
Same products
 |
Resistance Loop Bands | Seller: Shanghai Pisces Sporting & Leisure Products Co., Ltd | Resistance Loop Bandsare versatile fitness tools designed to enhance muscle strength, flexibility... |
 |
Stainless Steel Flux Cored Welding Wire E308T1-1 E308HT1-1 E308LT1-1 Gas Shielded FCAW Wire for 304 Stainless Steel Welding | Seller: 863048 | Product Description stainless steel flux cored wire E308T1-1 E308HT1-1 E308LT1-1,FCAW stainless ... |
 |
E317LT1-1 Flux Cored Wire CO2 Stainless Steel 70% Flux Content 1.0/1.2/1.6mm Diameter OEM Customized 1200C Melting Point | Seller: 863048 | XUNZHUO STAINLESS STEEL CORED WELDING WIRE E317LT1-1 CLASSIFICATION: There are ones with diamet... |
 |
Mini Jewelry Laser Repair System – 60W to 400W Precision Welding | Seller: Beijing JCZ Technology Co., Ltd | The Mini Jewelry Laser Welding Machineis an advanced mini laser welding system engineered for pre... |
 |
Portable Backpack Laser Cleaning Machine – Lightweight, Efficient Rust & Paint Removal | Seller: Beijing JCZ Technology Co., Ltd | TheHCP-M SeriesBackpack Laser Cleaning Machinefeatures a compact pulsed fiber laser system, desig... |
