Air Intake Filter Performance Test System
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Application
This system is used for:
Engine Air Intake Filters: Testing filtration performance according to ISO 5011.
Industrial Air Filters: Performance testing for machinery intake filters.
Customer-Specific Standards: Flexible adaptation for custom test requirements.
Quality Control & R&D: Evaluating filter efficiency, dust holding capacity, and airflow restriction.
Standards
The system complies with:
(1) ISO 5011 – Air filter test for combustion engines and industrial machinery.
(2) ISO 12103-1 – Test dust (fine and coarse) for filter efficiency evaluation.
(3) ISO 10263 – Dust retention testing and gravimetric efficiency.
Parameters
| Parameter | Unit | Value |
|---|---|---|
| Test Flow Rate | m³/min | 2 … 50 (at 20°C and 1013 hPa) |
| Differential Pressure Measuring Range | Pa | ≤ 15.000 |
| Compressed Air Supply | bar | 6 |
| Power Supply | – | 400 VAC, 125 A |
| Test Aerosol | – | ISO 12103-1 A2 (fine), ISO 12103-1 A4 (coarse) |
Accessories
| Accessory | Description |
|---|---|
| Water Injection System | For humidification and testing under specific conditions |
| Water Separators | Ensures clean airflow and prevents moisture interference |
| Additional Pressure Sensors | Measure complete air inlet system pressure |
| Particle Measurement | Downstream particle counting for efficiency assessment |
| Scavenging Line | Removes residual dust and ensures safe operation |
Test Principle
The system draws a controlled airflow through the filter sample while injecting standardized dust (ISO 12103-1). Differential pressure, airflow restriction, dust loading, and gravimetric efficiency are continuously measured. Downstream particle counters monitor the filtration efficiency in real time. The system automatically adjusts dust dosing and flow rate to achieve repeatable and standardized results.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Putty sanding meter | Standard GB/T 1770 YC/T 315-2009 GB/T 1749-2025 Technical parameters The technical parameters of the putty sanding tester may vary from model ... |
 |
Scratch Hardness Tester | Application Primary applications: Quantitative assessment of scratch and surface hardness Evaluation of coatings, thin films, pressure-sensitive... |
 |
Spring torsion fatigue testing machine | The Spring Torsion Fatigue Testing Machine (horizontal type) is an advanced automatic torsional fatigue testing instrument with digital display and... |
 |
Adiabatic Accelerated Calorimeter | An Accelerating Rate Calorimeter (ARC) is a high-precision thermal analysis instrument that assesses the thermal decomposition behavior and safety ... |
 |
Full Vehicle Environmental Performance Test Chamber, ISO 12219 | Full Vehicle Environmental Performance Test Chamber is a specialized facility designed for comprehensive testing of gasoline and electric vehicles ... |
Похожие товары
 |
ASTM F2100 mask tester | Продавец: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application G506 Automatic Filter Perfor... |
 |
Membrane Filter Integrity Testing Equipment | Продавец: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application (1) Hydrophobic filter integ... |
 |
Fuel Water Separation Efficiency Test Rig | Продавец: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications The Fuel Water Separator Te... |
 |
DIN 51524 Purification Equipment for Hydraulic Oil | Продавец: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application You can apply this tester in... |
 |
ASTM D6304 oil moisture tester | Продавец: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application You can apply this unit in t... |
