Air Intake Filter Performance Test System
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Application
This system is used for:
Engine Air Intake Filters: Testing filtration performance according to ISO 5011.
Industrial Air Filters: Performance testing for machinery intake filters.
Customer-Specific Standards: Flexible adaptation for custom test requirements.
Quality Control & R&D: Evaluating filter efficiency, dust holding capacity, and airflow restriction.
Standards
The system complies with:
(1) ISO 5011 – Air filter test for combustion engines and industrial machinery.
(2) ISO 12103-1 – Test dust (fine and coarse) for filter efficiency evaluation.
(3) ISO 10263 – Dust retention testing and gravimetric efficiency.
Parameters
| Parameter | Unit | Value |
|---|---|---|
| Test Flow Rate | m³/min | 2 … 50 (at 20°C and 1013 hPa) |
| Differential Pressure Measuring Range | Pa | ≤ 15.000 |
| Compressed Air Supply | bar | 6 |
| Power Supply | – | 400 VAC, 125 A |
| Test Aerosol | – | ISO 12103-1 A2 (fine), ISO 12103-1 A4 (coarse) |
Accessories
| Accessory | Description |
|---|---|
| Water Injection System | For humidification and testing under specific conditions |
| Water Separators | Ensures clean airflow and prevents moisture interference |
| Additional Pressure Sensors | Measure complete air inlet system pressure |
| Particle Measurement | Downstream particle counting for efficiency assessment |
| Scavenging Line | Removes residual dust and ensures safe operation |
Test Principle
The system draws a controlled airflow through the filter sample while injecting standardized dust (ISO 12103-1). Differential pressure, airflow restriction, dust loading, and gravimetric efficiency are continuously measured. Downstream particle counters monitor the filtration efficiency in real time. The system automatically adjusts dust dosing and flow rate to achieve repeatable and standardized results.
Send product request
Other supplier products
 |
Dry and Wet Retroreflectometer | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Dry and Wet Retroreflectometer, also known as the Dry and Wet Sand Abrasive Wear Testin... |
 |
Liquid Spontaneous ignition point tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Product Description complies with GB/T 21860-2008 “Test Method for Autoignition Temp... |
 |
Sand Falling Abrasion Resistance Testing Equipment | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards GB811-2022. GB24429 GB/T 38305 GJB1564A GA/T44. GA293 GA294 GA295 GA296 ... |
 |
Scott Flex Tester ASTM F392 | Flex Resistance Testing Machine | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The Scott Flex Tester is suitable for: (1) Leather Industry: Te... |
 |
meChanical scratch tester for coating adhesion testing | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards (1) GB/T 23989-2009 – Determination of scratch resistance of coatings (2)... |
Same products
 |
Filter Efficiency Testing Equipment | Seller: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com TheFilter Efficiency Testing Equipmentis ... |
 |
G506 Filter Performance Tester | Seller: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards ASTM F2100:Standard Specificat... |
 |
Automated Filter Integrity Tester | Seller: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Testing Standards ASTM F838 – Memb... |
 |
High Efficiency Oil Water Separation Tester | Seller: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards ISO/TS 16332-2006 – Meth... |
 |
DIN 51524 hydraulic oil analyzer | Seller: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards You can operate this unit in c... |
