Automated Leakage Testing Machine

Whats/App: +86 156 1874 6768

Web: standard-groups.com

Standards

GB/T 4208 Degrees of Protection Provided by Enclosures (IP Code)

GB/T 10125 Corrosion Tests in Artificial Atmospheres – Salt Spray Tests

GB/T 15173 Sealing Test Methods for Electrical Equipment

GB/T 2423 (Series) Environmental Testing for Electric and Electronic Products

QC/T 413 Sealing Test Methods for Automotive Parts

JB/T 9092 Airtightness Test Methods for Industrial Products

ISO 20485 Non-destructive Testing – Leak Testing – General Methods

ASTM E283 Standard Test Method for Determining Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen

Technical data

Parameter	Unit	Value
Test flow rate	L/min	0.005 … 300 (during operation)
Test pressure	kPa	– (0.1 … 90); + (0.1 … 500)
Operating medium (gas/air)	–	Dry, particle-free compressed air
Compressed air supply	bar	max. 8 (max. 600 L/min)
Power supply	–	230 VAC
Environmental condition, temperature	°C	-40 … 120
Power consumption	W	approx. 500
System dimensions (W × H × D)	mm	2000 × 1100 × 900
Weight	kg	approx. 280

Features

Test pressure is measured directly at test sample

Tests with over and low-pressure possible (pressure and suction mode)

Wide temperature range of applicable test air

By means of cascading of several laminar flow elements wide volume flow range

Compact design

Mobile – easy to move by lockable weels

Easy handling supported by computer-controlled test procedure

Accessories

(1) Test air adapter for external sample connection

(2) Pressure measurement port

(3) Temperature sensor for test air monitoring

(4) Connecting lines

(5) Computer-controlled test and data acquisition software

Test Procedures

Connect the test sample to the test air adapter, pressure port, and temperature sensor.

Place the test sample in ambient conditions or inside a climatic chamber if required.

Select overpressure or low-pressure test mode according to the test requirement.

Apply compressed air or vacuum to establish a stable pressure condition inside the sample.

Measure pressure, volume flow, and gas temperature continuously during the test.

Calculate the leak rate automatically based on flow behavior and pressure differences.

Record and evaluate the test results using the computer-controlled system.

Maintenance Information

Regularly inspect laminar flow elements to ensure accurate flow measurement.

Keep compressed air clean and dry to prevent contamination of measurement components.

Verify pressure and temperature sensors periodically for calibration accuracy.

Check seals, hoses, and connectors for wear or leakage before each test series.

Ensure proper functioning of the heat exchanger when operating at extreme temperatures.

Другие товары поставщика

	ASTM F1671 dry microbial tester	Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The Dry Microbial Penetration Resistance Tester assesses material resistance ...
	Metal Corrosivity Tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com The Metal Corrosivity Tester is used to determine the corrosivity of liquids and solids tha...
	Oil Separator Filtration and Separation Tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications Test System SPT for testing of separator, especially for blow-by oil mist sep...
	Hydraulic Pump Contamination Resistance Tester Manufacturer	Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Hydraulic pump pollution resistance test bench is mainly used to detect the f...
	Spectrophotometer tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard CIE No.15. ISO 7724-1: Meets international colorimetry and spectral measurement s...

Все товары поставщика

Похожие товары

	Filter Efficiency Testing Equipment	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com TheFilter Efficiency Testing Equipmentis ...
	G506 Filter Performance Tester	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards ASTM F2100:Standard Specificat...
	Automated Filter Integrity Tester	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Testing Standards ASTM F838 – Memb...
	High Efficiency Oil Water Separation Tester	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards ISO/TS 16332-2006 – Meth...
	DIN 51524 hydraulic oil analyzer	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards You can operate this unit in c...