Automated Leakage Testing Machine

Whats/App: +86 156 1874 6768

Web: standard-groups.com

Standards

GB/T 4208 Degrees of Protection Provided by Enclosures (IP Code)

GB/T 10125 Corrosion Tests in Artificial Atmospheres – Salt Spray Tests

GB/T 15173 Sealing Test Methods for Electrical Equipment

GB/T 2423 (Series) Environmental Testing for Electric and Electronic Products

QC/T 413 Sealing Test Methods for Automotive Parts

JB/T 9092 Airtightness Test Methods for Industrial Products

ISO 20485 Non-destructive Testing – Leak Testing – General Methods

ASTM E283 Standard Test Method for Determining Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen

Technical data

Parameter	Unit	Value
Test flow rate	L/min	0.005 … 300 (during operation)
Test pressure	kPa	– (0.1 … 90); + (0.1 … 500)
Operating medium (gas/air)	–	Dry, particle-free compressed air
Compressed air supply	bar	max. 8 (max. 600 L/min)
Power supply	–	230 VAC
Environmental condition, temperature	°C	-40 … 120
Power consumption	W	approx. 500
System dimensions (W × H × D)	mm	2000 × 1100 × 900
Weight	kg	approx. 280

Features

Test pressure is measured directly at test sample

Tests with over and low-pressure possible (pressure and suction mode)

Wide temperature range of applicable test air

By means of cascading of several laminar flow elements wide volume flow range

Compact design

Mobile – easy to move by lockable weels

Easy handling supported by computer-controlled test procedure

Accessories

(1) Test air adapter for external sample connection

(2) Pressure measurement port

(3) Temperature sensor for test air monitoring

(4) Connecting lines

(5) Computer-controlled test and data acquisition software

Test Procedures

Connect the test sample to the test air adapter, pressure port, and temperature sensor.

Place the test sample in ambient conditions or inside a climatic chamber if required.

Select overpressure or low-pressure test mode according to the test requirement.

Apply compressed air or vacuum to establish a stable pressure condition inside the sample.

Measure pressure, volume flow, and gas temperature continuously during the test.

Calculate the leak rate automatically based on flow behavior and pressure differences.

Record and evaluate the test results using the computer-controlled system.

Maintenance Information

Regularly inspect laminar flow elements to ensure accurate flow measurement.

Keep compressed air clean and dry to prevent contamination of measurement components.

Verify pressure and temperature sensors periodically for calibration accuracy.

Check seals, hoses, and connectors for wear or leakage before each test series.

Ensure proper functioning of the heat exchanger when operating at extreme temperatures.

Other supplier products

	Contact heat resistance tester	The contact heat resistance tester evaluates materials' ability to withstand high-temperature contact heat by measuring the time required for speci...
	Battery Adiabatic Calorimeter	Whats/App: +86 156 1874 6768 Web: standard-groups.com Reference Standards GB/T 36276 - 2023 *Lithium - ion Batteries for Electric Power Energy S...
	JIS Rubbing Color Fastness Tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com The Rubbing Color Fastness Tester is a Type II rubbing test machine designed and manufactur...
	material surface scratch and scuff tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com Application You can use this tester to: Evaluate automotive interior and exterior coating...
	Diaper impurity testing machine	The Diaper Impurity Testing Machine is designed for visual inspection of disposable diapers under controlled lighting conditions to detect residual...

All supplier products

Same products

	Automated Filter Integrity Tester	Seller: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Testing Standards ASTM F838 – Memb...
	High Efficiency Oil Water Separation Tester	Seller: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards ISO/TS 16332-2006 – Meth...
	DIN 51524 hydraulic oil analyzer	Seller: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards You can operate this unit in c...
	Cartridge filter pore size distribution tester	Seller: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards ISO 2942:2004 — Hydrauli...
	Cartridge Dynamic Cycle Tester	Seller: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards (1) ISO 23840 — Hydrauli...