Cooling Water Chiller SUNDI -45℃~300℃

• 

It is important to choose the suitable heat conduction medium, to make sure that system works stably. To choose the suitable medium according to the working temperature of the system is essential.

How to Determine Freezing Water Flow Rate?

A lot of people will ask such a question when they buy a cold water machine -- how do you determine the freezing water flow of a refrigerated water unit? So which aspects should we consider the cold water flow?

Detect the pressure value of the in- and out-water, then refer to instruction about the water flow under this circumstance and determine whether the water system is normal by looking at the description in the corresponding table or flow diagram of the unit. This difference is also used to determine which part of the water pipeline has a large resistance and make corresponding rectification plan and action.

If the temperature of the is tested lower than zero after running for 30 minutes, then water flow is not enough on water side heat exchanger which causes evaporation temperature and pressure to fall and cause freon in evaporator flow to the compressor suction duct in evaporation heat. That brings about the fact that the compressor suction temperature below zero. In addition, the evaporation pressure and evaporation temperature caused by low temperature setting should be excluded. However, the low-temperature unit can be considered normal as long as there is 6 ~ 8 ℃ overheat of compressor suction. So under normal water flow, the compressor suction temperature generally will be greater than 0 ℃. Temperature lower than this value should be ruled out water system problems.

By detecting the current of the pump of water and comparing with rated current, you can determine the actual water flow, whether its water flow is big or small. Refer to the parameters above, you can draw an exact water system testing analysis report.

Другие товары поставщика

	Industrial Chiller System SUNDI -25℃~300℃	Use high temperature resistant low-temperature magnetic drive pump or a leak-free high and low-temperature shield-driven pump, reduce the risk of s...
	Industrial Freezer	, also called industrial refrigeration machine, industrial chillers, low temperature refrigerator for ultra low temperature freezer, The temperatur...
	Cryogenic Refrigerator -65℃～-10℃	Microcomputer control, cascade temperature controller, digital temperature display, the regulation of unit 0.1℃, inside the temperature range -20 ℃...
	Heating Circulator UC	Heating cooling circulator UC series with function from high temperature to cooling process, from 300℃~50℃. Equipped with heating cooling container...
	Thermal Shock Test Chamber	High and low temperature impact chamber is a necessary test equipment of material such as metal, plastic, rubber, electronics and so on, used for t...

Похожие товары

	HORIZONTAL RADIATOR FOR GAS GENSET	Продавец: Санъян яньонг технолоджис лимитедermalsys Co.,Ltd	Звук вентилятор, вентилятор соответств с разработа спрос наедин контролир, кругл медн труб алюмин...
	HORIZONTAL RADIATOR FOR GAS GENSET	Продавец: Санъян яньонг технолоджис лимитедermalsys Co.,Ltd	Звук вентилятор, вентилятор соответств с разработа спрос наедин контролир, кругл медн труб алюмин...
	Double Door Beverage Cooler	Продавец: Shengzhou redbowl refrigeration equipment Co., Ltd.	Redbowl Refrigeration Equipment Co., Ltd is leadingChina commercial refrigerator and free...
	FHC136 Water Cooled Plate Heat Exchanger	Продавец: Zhejiang Forwon Plate Heat Exchanger Co., Ltd	Brand Name:Forwon Model Number:FHC136 Place of Origin:Zhejiang, China (Mainland) Structure:Plate ...
	Boxed Type Air-cooled Chiller	Продавец: SCY chiller	It is manufactured by modern advanced technology with excellent quality and beautiful appearance....