High rigidity type crossed roller bearing CRBH
Crossed Roller Bearing is a bearing with compact structure in which the rollers are arranged so that they cross between the inner ring and the outer ring. Since the rolling surface is line contact, elastic displacement based on bearing load is extremely minimal, and in addition, it is able to receive complicated loads consisting of radial load, axial load, and moment at the same time.
This bearing is broadly used in revolving parts that require compactness, high rigidity, and revolution accuracy such as industrial robots, machine tools, and medical equipment.
Furthermore, we also manufacture bearings made of stainless steel, and those with attachment holes in inner and outer rings, so please make inquiries at XK.In crossed roller bearings, the crossed roller bearings are capable of withstanding radial load, axial load and moment load because the cylindrical rollers are arranged perpendicularly to each other on the V-shaped groove rolling surface of 900 by an isolating block Direction of the load. The inner and outer rings are miniaturized and the extremely thin form is close to the limit and has a high rigidity. Therefore, it is most suitable for the joint and rotation parts of the industrial robot, the rotary table of the machining center, the rotating part of the manipulator, Precision rotary table, medical equipment, calculators, IC manufacturing equipment and other equipment.
Rotation accuracy: the bearings are arranged vertically between the rollers with isolation block, to prevent the roller tilt and the friction between the rollers, reducing the torque. In addition, the edge stress concentration or locking of the roller does not occur as compared with the conventional use of the steel sheet holder. Also, since the inner ring or the outer ring is a two-segmented structure, the bearing clearance can be adjusted to smoothly rotate with high precision even when the preload is applied.
Bearing characteristics:
1, high precision: Accuracy can reach P4, P2 level;
2, high rigidity: The series bearings are preloaded;
3, high load: can withstand axial load, radial load, overturning load.
4, small size: the small size of the bearing can save space for the host.
CRBH type (inner and outer ring integral type, ultra-thin), this model is ultra-thin type RU, due to the ultra-thin design and the outer ring and inner ring without mounting holes, flange and support bracket. In addition, because the outer ring and the inner ring are the overall structure, the installation does not affect the performance, it can get a stable rotation accuracy and torque, suitable for outer and inner ring rotation but the size of the small size requirements.
Другие товары поставщика
Все товары поставщика
Похожие товары
