.

IS Centrifugal Pump

Product name:IS Centrifugal Pump

Model:IS Centrifugal Pump

Application:IS clean water pump for industrial and urban water supply, drainage, can also be used for agricultural irrigation and for conveying water or physical and chemical properties similar to water or other liquids, the temperature is not high 80 ℃.

Product overview

IS single-stage single-suction centrifugal pump Overview:
IS clean water pump for industrial and urban water supply, drainage, can also be used for agricultural irrigation and for conveying water or physical and chemical properties similar to water or other liquids, the temperature is not high 80 ℃.
IS single-stage single-suction centrifugal pump Features:
1, IS type and size based on performance to ISO2858 international standard design, mainly by the pump, pump cover, impeller, shaft seal rings, bushings and suspension bearings and other components missing.
2, IS-type pump and pump cover part of the back office split from the impeller, that is commonly referred to as post-formal open structures. The advantage is easy maintenance, repair does not move when the pump, suction line, discharge line and the motor, just remove the spacer coupling intermediate coupling member, you can exit the rotor parts repair.
3, the pump casing (ie, pump and pump cover) constitute the pump studio. Impellers, shafts and rolling bearings as the pump rotor. Suspension bearings support the rotor assembly of the pump, the rolling bearing by radial and axial forces of the pump.
4, in order to balance the axial force of the pump, before most of the pump impeller, the seal ring has a rear, and the rear cover plate is provided in the impeller balance holes, due to force some small shaft, the impeller does not have a seal on the back rings and balance holes.
5, pump axial seal ring is made packing gland, packing rings and packing, etc., in order to prevent water leakage into the air or a lot. If the pump impeller balance is equipped with wadding impeller inlet port communicating with the cavity, impeller inlet of liquid in a vacuum, it is very easy along the sleeve surface of the intake, it is equipped with packing rings in the stuffing cavity through Pump cover the hole, the pump chamber pressure water lead to the packing ring seal. If not pump impeller balance holes, due to the back of the impeller fluid pressure greater than atmospheric pressure, so there is no leakage problems, it is time to install packing rings.
6, to avoid shaft wear, the shaft through the packing chamber parts fitted sleeve protection. There are O-ring seal between the quasi sleeve and the shaft, to prevent mating surfaces along the inlet or leaking.
7, pump drive way is by lengthening the flexible coupling and motor coupled to the rotation direction of the pump from the drive end, clockwise rotation.
IS single-stage single-suction centrifugal pump range of parameters:
Flow rate Q 5.4 ~ 400m3 / s
Head H 4 ~ 125m
IS single-stage single-suction centrifugal pump Model Description:
IS125-100J-315A
Single-stage single-suction centrifugal water pump IS-
125- inlet diameter (mm)
100 discharge outlet diameter (mm)
J-J indicates deceleration use
315- impeller nominal diameter (mm)
AA, B, C, respectively, impeller diameter through the first, second and third cutting
IS single-stage single-suction centrifugal pump sets of range:

Complete supply of pumps, motors, public base, couplings, it also provides bottom valve, check valve, gate valve.

type flow
Q
range
H
Rotational speed
n
Shaft power
Pa
Electric motor Efficiency
n
Steam eclipse amount Impeller diameter Imported caliber Outlet diameter WEIGHT
m3/h L/s m r/min kw Power/kw TYPE % m mm mm mm kg
100-80J-160B 43.3 12.03 6 1480 1 1 Y90L-4 71 2.5 147 100 80 79
100-65-200 60
100
120
16.67
27.78
33.33
54
520
47
2980 13.6
17.9
19.9
22 Y180M-2 65
76
77
3.0
3.6
4.8
198 100 65 56
100-65J-200 30
50
60
8.33
13.89
16.67
13.5
12.5
11.8
1480 1.84
2.33
2.61
4 Y112M-4 60
73
74
2.0
2.0
2.5
198 100 65 56
100-65-200A 93.5 25.97 44 2980 15.14 18 Y160L-2 74 3.6 188 100 65 56
100-65J-200A 46.8 13 11 1480 1.97 3 Y100L2-4 71 2.0 188 100 65 56
100-65-200B 86.6 24.06 38 2980 12.45 15 Y160M2-2 72 3.6 177 100 65 56
100-65J-200B 43.3 12.03 9.5 1480 1.62 2 Y100L1-4 69 2.0 177 100 65 56
100-65-250 60
100
120
16.67
27.78
33.33
87
80
74.5
2980 323.4
30.3
33.4
37 Y200L2-2 61
72
73
3.5
3.8
4.8
248 100 65 95
100-65J-250 30
50
60
8.33
13.89
16.67
21.3
20
19
1480 3.16
4
4.44
5 Y132S-4 55
68
70
2.0
2.0
2.5
248 100 65 95
100-65-250A 93.5 25.97 70 2980 25.46 30 Y200L1-2 70 3.8 235 100 65 95
100-65J-250A 46.8 13 17.5 1480 3.38 5 Y132S-4 66 2.0 235 100 65 95
100-65-250B 86.6 24.06 60 2980 20.81 30 Y200L1-2 68 3.8 219 100 65 95
100-65J-250 43.3 12.03 15 1480 2.76 4 Y112M-4 64 2.0 219 100 65 95
100-65-315 60
100
120
16.67
27.78
33.33
133
125
118
2980 39.5
51.6
57.6
75 Y280S-2 55
66
67
3.0
3.6
4.2
307 100 65 130
100-65J-315 30
50
60
8.33
13.89
16.67
34
32
30
1480 5.45
6.92
7.66
11 Y160-4 51
63
64
2.0
2.0
2.5
307 100 65 130
100-65-315A 95.5 26.53 114 2980 46.33 55 Y250M-2 64 3.6 296 100 65 130
100-65J-315A 47.7 13.25 28.5 1480 6.07 7 Y132M-4 61 2.0 296 100 65 130
100-65-315B 90.8 25.22 103 2980 41.08 55 Y250M-2 62 3.6 281 100 65 130
100-65J-315B 45.4 12.61 25.8 1480 5041 7 Y132M-4 59 2.0 281 100 65 130
100-65-315C 85.8 23.83 92 2980 35.83 45 Y225M-2 60 3.6 270 100 65 130


slurry pump China/factory/supplier/manufacturer/exporter, gravel pump China/factory/supplier/manufacturer/exporter,mud pump China/factory/supplier/manufacturer/exporter, desulfurization pump China/factory/supplier/manufacturer/exporter,swage pump China/factory/supplier/manufacturer/exporter, sage pump China/factory/supplier/manufacturer/exporter,centrifugal pump China/factory/supplier/manufacturer/exporter,industry pump China/factory/supplier/manufacturer/exporter


Shi jia zhuang Bojin pump co.,ltd
Contact: Johnny
Address: No.266 Tianshan Street Shijiazhuang,Hebei Province,China
Tel:
Mobile:

Website:
E-mail:
Postal Code: 050035



Отправить запрос, связаться с поставщиком

Кому: Shi jia zhuang Bojin pump co.,ltd
Ваш E-mail:
Текст письма:


Send to other suppliers

Другие товары поставщика

GC Centrifugal Pump
GC Centrifugal Pump Product name:GC Centrifugal Pump Model:GC Centrifugal Pump Application:GC type pump is horizontal, single suction multistage centrifugal pumps Prod...
IS Centrifugal Pump
IS Centrifugal Pump Product name:IS Centrifugal Pump Model:IS Centrifugal Pump Application:IS clean water pump for industrial and urban water supply, drainage, can als...
S-type Single-stage Double-suction Pump
S-type Single-stage Double-suction Pump Product name:S-type Single-stage Double-suction Pump Model:S-type Single-stage Double-suction Pump Application:S-type single-stage double-suction p...
N Condensate Pump
N Condensate Pump Product name:N Condensate Pump Model:N Condensate Pump Application:condense water vapor and 750-3000 kW Condensate pumping turbine generator set an...
DL Multi-stage Pump
DL Multi-stage Pump Product name:DL Multi-stage Pump Model:DL Multi-stage Pump Application:DL-type pump is vertical, single suction, multistage centrifugal pumps, used...
Все товары поставщика

Похожие товары

Погружный двигатель и насос
Погружный двигатель и насос Продавец: Tianjin Best Faith International Trade Co., Ltd. QN/QM 6 "8" 10 "12" подводный двигатель Погружный двигатель Ritz 1215/2-1218/2-1222/2 Погружный...
China offer Plunger pump A10VS0-100DR-31R-PPA12N0 for Electric Company
China offer Plunger pump A10VS0-100DR-31R-PPA12N0 for Electric Company Продавец: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD "China offer Plunger pump A10VS0-100DR-31R-PPA12N0 for Electric CompanySelection of advanced tech...
40PV-TSP(R) Vertical Slurry Pump
40PV-TSP(R) Vertical Slurry Pump Продавец: Shijiazhuang Ruite Pump Co., Ltd 40PV-TSP(R) Vertical Slurry Pump Product Description 40PV-TSP(R) Slurry Pump is ideal for a var...
12/10ST-TAHR Slurry Pump
12/10ST-TAHR Slurry Pump Продавец: Shijiazhuang Ruite Pump Co., Ltd 12/10ST-TAHR Slurry Pump Product Description The feature frame and cover plates made out of gre...
China made Guide pin 0069/0070 for power station
China made Guide pin 0069/0070 for power station Продавец: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD "China made Guide pin 0069/0070 for power stationThe company has a large flow, high discharge pre...